PCB Equipment
-1 2 3
PCB Sample
-1 2 3
- PCB Factory
- Certificate
- PCB Capability
- PCB Customer





 
 
 

Electronic Circuit Board PCB Manufacturer China,Electronic Circuit PCB Manufacturing,Prototyping ,Multilayer PCB board Manufacturing

PCB Manufacturer, quick turn Fast PCB Prototype, low cost High quality Bare PCB Contract Manufacturing, Multilayer // double side //FPC, High Density precision PCB, Impedance control PCB, Buried & Blind Via, Gold Finger, Lead free/ROHS/UL;
Gold Plating PCB,Immersion Gold/Silver surface, HASL surface.Heavy Copper PCB,
Material: FR4, High TG FR4, Rogers 4003,4350,Al Aluminum metal base,Taconic,Halogen Free material, CEM-3,Fr2,CEM-1,CEM-2,94VO, Rogers HF material, Polymide,Flexible PCB FPC etc. UL certification, quote & order 24 hour;
 
 

Customer Service Guideline for PCB factory line:
Quick response, Professional Service & Strive for the best.
Flexible PCB (FPC) and Rigid PCB Sample or mass production.

PCB fast Prototype output varieties: 3000 types per month

PCB output volume: 100,000 suqare feet per month

Quick turn / fast Prototype service:

Customer allover North America (USA - United States, Canada), Europe(UK - United Kingdom. England, France, The Netherlands, Spain, Austria), India...

The quickest Prototype lead time for 2-layer PCB: 24 hours
The quickest Prototype lead time for 4-8 layers PCB: 48 hours
The quickest Prototype lead time for 10 layers PCB or above: 120 hours

High Density PCB, Impedance control PCB, Buried & Blind Via, Gold Finger PCB,
Gold Plating PCB,Immersion Golde surface, HASL surface.Heavy Copper PCB,
Rogers PCB,Rigid Flex PCB, Teflon PCB, Halogen Free PCB, High TG PCB(High Temperature PCB), HF PCB(High Frequency PCB);
Aluminum PCB(Metal Base PCB)

For furhter information, please feel free to contact us,quote & order 24 hour.

 
 

Electronic Circuit Board PCB Manufacturer China,Electronic Circuit PCB Manufacturing,Prototyping ,Multilayer PCB board Manufacturing

Circuit PCB(Electronic Circuit Boards)
Precautions on printed circuit board (PCB) design

Upon the design of printed circuit board(Electronic Circuit Boards), consideration should be taken to suppress EMI level by prevention of the decrease of negative resistance.

1. Pattern length on PCB Printed Circuit Board
Add to Basket
Enquire Process Control Characteristic CPK Value
Drilling Hole Position Deviation/Hole Roughness ≥1.67 or According to customer’s request
Pattern Plating Copper thickness in hole
Outer Etching Line Width &Spacing / Impedance
Solder Mask Line Width &Spacing / Impedance
Profiling Outline Deviation(Routing)
OSP Coating Thickness
IMAG ( Immersion Silver ) Ag Thickness Circuit Boards and Kits
1 - 15 of 15 Products 1 AC/DC Electronics Laboratory
EM-8656

Designed to perform electricity experiments for AC and DC. Can be used in combination with the ScienceWorkshop 750 Interface and Power Amplifier or as a stand-alone unit. Basic Electricity Lab
EM-8622

Designed to implement a large variety of basic electrical circuits for experiments. CASTLE Kit
EM-8624A

Leads students from initial naive ideas to an increasingly expert understanding of electrical phenomena. Kit for two students. Desktop Electricity Kit
EM-8675

Provides students the conceptual tools to further their understanding of electric and magnetic interactions. Economy CASTLE Kit
EM-8654 ELECTRONICS KITS

Complete List

Kit List Divided Into Categories

ATTENTION Tech Ed Teachers: Custom Electronics Kits Also Available

AUDIO / MUSICAL KITS Circuit Skills: Circuit Board Etching with Collin Cunningham
MAKE Magazine is loaded with exciting projects that help readers make the most of technology in creative and unique ways. Contributing writer Collin Cunningham just released this great video that teaches you how to etch your own circuit board. The vast majority of printed circuit boards (PCB's) are made by bonding a layer of copper over the entire substrate, then removing unwanted copper after applying a temporary mask (by etching), leaving only the desired copper traces.

BEGINNER KIT: Little or no previous knowledge of electronics.
Basic soldering techniques required for circuit board assembly.Pcb Assembly
Product Name: Pcb Assembly
Product No: Pcb Assembly
Product Model: Pcb Assembly
Unit Price: 0USD/PCS
Manufacturer: Jxtpcb|corepcb|pcb|quick turn pcb|prototype pcb|circuit board|fpc|orcad|pcb design|circuit design|pcb manufacture|加急pcb

Product Presentation:
Quick turn pcb assembly - Rigid, Flex & Rigid Flex Printed Circuit Boards

We also provide Printed Circuit Board Assembly solutions for quick-turn Prototypes & small volume build without mass productions commitment.
Our Assembly facilities have both conventional through holes & state of the art surface mount technologies. These include double sided reflow, fine pitch & BGA Technologies with X-Ray Inspections.
Capabilities
♦ 4 - 12 Hours for quick turn prototypes
♦ Able to take in Full Turnkey or Consign projects
♦ Thru-Holes & Surface Mount Technology (Single/Double Sided)
♦ Pulse M1 Pick & Place + Wave-solder
♦ Water Soluble process + Aqueous Cleaning
♦ 0201 Devices to BGA
♦ Sourcing components
♦ Rework, Parts Recovery etc
Quality System
♦ Conform to ISO 9002 Standard & IPC-610 Multilayer PCB
Quick Links
Multilayer PCB Flowchart
Rigid Multilayer PCBs
Flexible Circuit Boards


Multilayer Registration Control
Prediction: layer-to-layer alignment
One primary characteristic is layer to layer alignment. In addition to our MultiLine tooling systems, we have purchased and implemented the use of the PerfecTest system to fine tune our process and achieve highly accurate scale factor predictions for a variety of material types and core thickness.

Imaging
Saturn has purchased and installed four Olec AT-30 automatic alignment exposure units. These units use four cameras to align artwork top to bottom, and then use panel motion systems to automatically adjust the panel position to a best fit to the artwork. Furthermore, these units have hybrid-collimated light units that ensure exposure light attacks the panel at 90 degree angles to the artwork, which is critical for fine line resolutions.

Microvia Drilling
Formation capabilities
We have installed advanced PCB drilling systems (Excellon Century 2001 and Mania Micronics 86) capable of up to 180k RPM spindle speed, which is critical for microvia formation. Furthermore, our advanced systems use linear motion technology for X, Y, and Z axis motion. This results in not only a higher throughput, but also increased registration accuracy.

Production Plating
Standard production / blind microvias
Saturn has built a custom automatic PCB plating line that has been designed and constructed primarily in-house. The intent was to minimize plating variation, which is the main goal of production plating. To address issues with plating small and blind holes we use mechanical agitation to allow chemical to flow through holes and vibration to remove air from microvias and blind microvias.

PCB Etching
2 mil line and spacing
Saturn has installed a new Hollmuller SES line. This line incorporates the latest in spray technology that minimizes chemical puddling. This is line capable to accurately and uniformly etch down to 2 mil lines and spaces.
Printed Circuit Boards (PCB) Suppliers serving Arizona
Displaying 1 to 25 out of 64 results
Related Categories
Boards: Terminal
Boards: Bulletin
Boards: Cutting
Boards: Sign
Boards: Interface
More...
to Serving
Arizona Located in
Arizona
Nujay Technologies, Inc. - Lake Forest, CA (Serving Arizona)
Distributor, Manufacturers' Rep
Distributor of outsourced rigid, flexible & rigid-flex printed circuit boards (PCBs). Rigid circuit boards are single sided up to 12 layers, have 1/2 to 4 oz. copper finish, minimum finished hole of 8 mil. Standard & a wide range of laminates & finishes. Flexible & rigid-flex PCBs are single sided up to 6 layers, have polyimide laminate, a wide range of finishes & a minimum line space of 3 mil line/3 mil space. Products can be ISO 9001:2000, QS9000 & ISO 14000 certified.
nujaytech.com/pcb/index.php
Qualitel Corporation - Everett, WA (Serving Arizona)
Custom Manufacturer, Service Company
Lean contract electronics manufacturing capable ISO 13485:2003, ISO 9001:2008 & AS9100 registered. Printed circuit boards (PCB) are available and made to aerospace, medical and military specifications. Specialized in advanced SMT processes including .4mm Fine-Pitch BGA, PoP, flying probe, and hass. Other processes include aqueous wash, wave / selective soldering, conformal coating, potting and repair. IPC-610/J-STD-001 Certified.
Printed circuit board repair by PPA Electronics

Hi-tech repair calls for craftsmanship. PPA Electronics is specialised in the repair of damaged and malfunctioning printed circuit boards (PCBs) for commercial and industrial customers.

Why should you call on PPA Electronics to repair your printed circuit board?
PCB Repair Products

PCB Repair Kits
PCB repair video how-to’s Fixing Simple Printed Circuit Board Mistakes
Every once in a while someone installing my mods gets in over his head, or something just goes wrong, and they ask me for help. I looked around on the Web for a page that shows how to fix common printed circuit board problems, so I could refer them to it. I was amazed that I couldn’t find such a page. So here are some examples of what not to do, and how to fix common problems when it all goes wrong.

I recently received this board for repair. The owner had attempted to install the green board reverb mod and the tone stack capacitors, and realized that he wasn’t hearing any bass or mids anymore. He had removed the tone stack caps again before he sent me the board. He had attached a weird piece of push-back wire to the cap that’s half-inserted into C20 and tack-soldered it to R40, and tack-soldered the re-routed R56 to the other side of R40. Neither tack-soldering joint held; one broke off in shipment and the other broke when I touched it. Neither would have survived the pounding that a combo amp gets from its speaker.

Circuit Board Repair and Rework Guide Related Information
Base Board Repair and Rework
BGA Component Rework and Modification
Circuitry and Plated Hole Repair
Coating and Marking Rework
Engineering Changes and Jumper Wires
Gold Edge Contact Repair and Replating
SMT and BGA Pad Repair
SMT/Through Hole Component Rework

Outline
The information within these guides should be helpful to anyone who works with bare circuit boards and circuit board assemblies. These guides are packed with illustrations and videos and follow popular IPC standards. These guides will help you through the maze of challenges you face when working on modern, high density circuit boards. If your company complies with ISO-9000 or any demanding quality standard, you can refer to these guides as your on-line reference.

Guides in sections 1 through 6 detail the proper step-by-step techniques, tools and materials, and cautions needed to reliably repair and modify bare and assembled circuit boards.

Guides in sections 7 and 8 detail the proper step-by-step techniques, tools and materials, and cautions needed to reliably rework assembled circuit boards.

Each procedure includes a "Conformance Level" indicated as high, medium or low. This Conformance Level indicates how closely the repaired or reworked product will be to the original specifications. The Conformance Level listed for each procedure should be used as a guide only.

As you can see, three out of four of the pads for the tone stack capacitors are completely gone. This kind of damage is normally caused when you’re desoldering components. The leads are bent over onto the circuit board, and if you try to lift them while any of the solder is still adhered, the pad comes off. If you work carefully, suck all of the solder off, and make sure the lead is not adhered to any part of the pad, you won’t have this kind of problem.

Scorching on the board and widely-spread rosin indicates that the soldering iron was either too large or too hot or both.

This is nasty, but all is not lost.

Search Catalog
Place OrderThe BEST PCB Repair Kit is designed to meet the quality of original trace, pad and plated thru-hole assemblies.BEST PCB repair kits give you the tools you need for fast repair and modification of lands, traces, contact fingers, SMT pads, plated hole connections and PCB base board material. These materials, packaged together and designed by one of the premier PCB repair companies, BEST Inc., allow you to meet original PCB quality standards.This is the most complete kit for your printed circuit board repair needs and includes not only the material required for such repairs but also professional "how to" instructional slides. It's the total package. This kit includes a selection of eyelets and funnelets, swaging tools for eyelets, a variety of circuit frames to repair or add traces, SMT pads, through hole connections and edge connectors. Each kit also contains a variety of specialty tools which, are used by both BEST Inc professional repair technicians and as teaching aids for board level repair instructors. If you need to repair damaged circuit boards, the all-in-one kit is just what you need.


Free PCB repair quote: Send us a picture of your damaged printed circuit board (and description of the failure), and we'll send you our quote for repair free of charge.
Your cost-savings: The price for circuit board repairs is 50% - 85% cheaper than the cost of a new board.
Quick repair: Most repairs are done within 7 working days. Or just 2 - 3 working days via our priority service.
1 year warranty: We offer you a 1 year warranty for our PCB repair services (unless agreed otherwise). The warranty applies to the hourly labour costs as well as to the materials used.
Our specialists in electronic board repair are at your service. Contact us now for more information on our excellent circuit board repair service.
Suntron Corp. - Phoenix, AZ
Manufacturer, Custom Manufacturer, Service Company
Lean manufacturing. ISO 9001:2008, ISO 13485, AS9100 & NADCAP certified manufacturer of prototypes including printed circuit boards (PCB). Transponders, generators, lighting, controls, power supplies, inverters, switches, radar systems, automatic pilots, data links, ground stations, actuators, spectrophotometers, transmitters, inverter boxes & cables, spectrometers, electronic valves, flow meters & tramp metal detectors are also available. Markets served include aerospace, defense, medical, network & telecommunication & semiconductor capital equipment. cGMP, FDA QSR, IPC 620A, J-STD-001, IPC-A-610 Class II, III, UL, TUV & CSA certified. ITAR registered. RoHS compliant.
Brand Names: Suntron
www.suntroncorp.com/production.html
Sample 2mil Ln/Sp board
For a sample of our 2 Millimeter Line and Space capabilities, check out our 2 Mil Flexible Printed Circuit Board in the Microelectronics section of our Flex / Rigid-Flex site.
2mil Line Spacing PCB

Multilayer PCB Prototypes
Production quality multi-layer boards
Saturn builds complex quick turn prototypes to production standards per IPC Class III and high reliability testing.
♦ AQL of 0.65% or 100% Inspection
♦ Lead Free
Whooper Alarm
Bell Action Kit - No Soldering
Digital Bird
Fuzz Box - Adds distortion to the output signal of an electric guitar
Velleman Guitar Pre-Amplifier With Headphone Output - provides you with a headphone
output, allowing you to practice without disturbing others
Hidden Tormentor - Your friends they can spend hours trying to find the source of its
intermittent and thoroughly annoying noise.
Automatic Siren
RSR Electronic Siren

Leads students from initial naive ideas to an increasingly expert understanding of electrical phenomena. Kit for eight students. Electronic Components - AC/DC Lab
EM-8668

Provides students the conceptual tools to further their understanding of electric and magnetic interactions. Electronic Components - Basic Electricity Lab
EM-8663

Replacement parts for the Basic Electricity Lab (EM-8622). Light Bulb Refurbishment Kit
SE-7147

Replacement materials needed for consumables found in PASCO's Reinventing Edison: Build Your Own Light Bulb (SE-7145).
IMSN ( Immersion Tin ) Tin Thickness
ENIG( Immersion Gold ) Au Thickness
Product Specifications:
This rigid-flex printed circuit board is used to mechanically support and electrically connect electronic components using conductive pathways. It is made of quality alloy material and composite plastic. It may be produced in different layers and sizes according to your needs.
Reduces mechanical space and device weight.
Pre-set programs for different functions.

In order to prevent degradation of the electrical characteristics by inductance and stray capacitance of wiring, it is recommended to connect crystal units with IC and capacitors by the shortest wiring length. This pattern length should be approximately within 2 cm, but the shorter the length the less EMI radiates as far as the placement of components such as IC and crystal units does not become problem. Since EMI mainly occurs from the OUT side of the inverter, the pattern length of this portion should be the shortest in crystal oscillation circuit. Also, through holes are not preferable since they become the source of EMI.