ROGERS3035 PCB
THE PCB MUST MUST BE IDENTICAL TO GERBERS FILES. DO NOT ALTER OF MODIFY GERBER-FILES!
1. The gerber files must not be changed: for example, do not use impedance control etcetera.
2. ALL drill holes must be plated with silver.
3. All copper must be covered with silver finish.
4. Dielectricum between Copper Top and Copper Inner 1 is ROGERS3035, 250 um material, with 35 um copper thickness
5. Dielectricum between Copper inner 2, and Copper bottom is FR4, with 35 um copper thickness
6. Total thickness of the layer stackup is 1.6 mm
7. Green soldermask, White silkscreen
8. Please fill vias with resin and plate copper
For furhter information, please feel free to contact us, www.pcbsino.com
