humidifier PCB assembly electronic manufacturing

humidifier PCBA turnkey assembly Manufacturing

humidifier PCBA turnkey assembly Manufacturing
Humidity acts as a natural moisturizing agent that can relieve dryness. For this reason, humidifiers are often used for relieving:

On evaporative humidifiers, you will need to perform occasional wick maintenance. To clean an evaporative wick, soak it in cold water for 20 minutes and gently swish it back and forth to release minerals. Never use hot water or chemicals. To avoid mold growth on the filter, pull out the filter and let it dry when you turn the humidifier off for more than a day, or leave it in and let the fan run with no water until the filter is dry. But you can’t clean the same wick forever without the antimicrobial treatment wearing off, so you’re going to have to replace it every six months at a minimum (though this could be as often as every month if you have very hard water).

Ultrasonic humidifiers do not have wicks, but most do have some kind of demineralization cartridge or treatment that will need to be replaced every so often. Our Sunpentown ultrasonic pick has a $25 cartridge that the company recommends swapping out every six months.

The evaporative Honeywell is about as effective as any machine at maintaining a comfortable level of relative humidity, but it takes a bit longer to get to that comfortable level than its ultrasonic competitors. This means it’s good to give it a bit of a head start before bedtime if you’re not planning on running it 24 hours a day.

The 1-gallon reservoir is on the small side, and needs refilling at least once a day—although the same is true of our runner-up evaporative model, the Sunpentown SU-9210, and our pick for large rooms, the Sunpentown SU-4010. At the same time, a larger reservoir carries its own drawbacks. They can be more difficult to clean, harder to fit under smaller sinks, and heavier when filled.

Why Choose a Whole-Home Humidifier?

Installed directly to your home's central heating and cooling system, a whole-home humidifier provides whole-home comfort—unlike portable units that only address certain rooms.

The best way to test humidity levels in your house is with a hygrometer. This device, which looks like a thermometer, measures the amount of moisture in the air. Hygrometers can be purchased at hardware stores and department stores. When buying a humidifier, consider purchasing one with a built-in hygrometer (humidistat) that maintains humidity within a healthy range.

One of the tough things about not properly cleaning your humidifier is that you're potentially doing more harm than good by shooting bacteria out into the air. If that's your concern, you'll rest easier with the Honeywell Germ-Free Humidifier.

The main draw is its UV technology that claims to destroy up to 99.9% of bacteria, mold, and fungus that could be lurking in the water. It's easy to clean, too, since all parts are dishwasher safe, and the tank's design allows you to reach in and scrub out.

One con is that the Honeywell has a filter that needs replacing very few months, and they cost about $11 each. However, some might say that's easier and not much more expensive than having to buy white vinegar for regular weekly cleaning as is recommended for other humidifiers.

Honeywell Germ Free Cool Mist Humidifier, HCM-350, $69.99, available at Amazon.

Top of the line

Amazon
This one comes in at a higher price point, but you'll get some pretty cool features for the extra expense. For starters, there's a built-in sensor that figures out how much humidity is in the room, and then automatically adjusts based on the setting you specify. When the humidity goes above that level, the Seneo will stop running. The unit also swings 45 degrees each way so that the mist is distributed across the room.

As for aesthetics, the color-changing night light (seven colors in all), creates a cool lava lamp-like vibe. You can choose one color, or let it rotate automatically.

On its face, the Pure Enrichment Ultrasonic Cool-Mist Humidifier (2016 update) sure seems popular. But despite its high star rating on Amazon, the authenticity of many of those reviews is questionable. Besides that, its tiny 1½-liter tank means it’s useless for all but the smallest spaces—maybe 125 square feet, a 10-by-12 room. Its (seemingly authentic) negative reviews focus on two other disqualifying factors: It tips over easily, and when it tips, the tank has a tendency to break.

The Opolar 3.8-liter Ultrasonic Humidifier (2016 update) is intriguing because of its wide fill hole, which the manufacturer claims makes it easier to clean. Cleaning humidifiers is vitally important—see Health risks of a dirty humidifier, above—and our main pick’s ease of cleaning is key to our endorsement of it. Otherwise, however, this is a standard-issue ultrasonic humidifier, and in spite of its higher price, it offers no clear advantages over our ultrasonic pick, the Sunpentown SU-4010.

If you must have a budget-friendly ultrasonic, the Safety 1st Ultrasonic 360° Humidifier works, which is impressive for such a cheap unit, but its drawbacks keep it from being a pick. It’s not a bad deal for its currently price of about $30, but you’re going to get only that much worth of humidifier. It runs very quietly and is capable of outputting a fair amount of moisture—it raised our test area’s relative humidity by 17.5 percent over our three-hour testing period. But it’s limited by a tiny 0.8-gallon reservoir that will need frequent refilling, and it lacks a mineral filter, which means you’ll have to use distilled water if you want to avoid mineral dust issues (which you do). Also, it has a two-piece reservoir with a small opening (making it hard to clean) and a long list of customer reviews that complain about leaking and other problems.

The Air-O-Swiss 7135 was an earlier top pick because of its silent operation, humidistat, and prodigious moisture output. Indeed, that it was able to raise an already-moist room’s relative humidity by 34 percent is quite impressive (though it did create a big puddle around the base in the process of doing so). Previously, we put a lot of value into this humidifying ability, but based on feedback we’ve gotten, it’s more than most people need and more than most people want to pay. Its price is already high. Add the highest cost of consumables (water treatments/demineralization cartridges) and electricity ($100 over three years) and you get the humidifier with the highest cost of ownership by far. Plus, its humidistat completely failed to maintain a consistent level.

Seneo 3.0L Ultrasonic Cool Mist Humidifiers with Sensor Control, Auto Swing, $69.99, at Amazon.

This article was originally published on
6.

Disclosure: This post is brought to you by Business Insider's Insider Picks team. We aim to highlight products and services you might find interesting, and if you buy them, we get a small share of the revenue from the sale from our commerce partners, including Amazon. Jeff Bezos, CEO of Amazon, is an investor in Business Insider through his personal investment company Bezos Expeditions. We frequently receive products free of charge from manufacturers to test. This does not drive our decision as to whether or not a product is featured or recommended. We operate independently from our advertising sales team. We welcome your feedback. Have something you think we should know about? Email us at insiderpicks@businessinsider.com.
Water Dispenser Printed Circuit Board Assembly Service
China Water Dispenser Printed Circuit Board Assembly Service
8
US$ 0.65 - 36.9 / Piece
1 Piece (Min. Order)
Supplier Details
Inquire Now Add this product to Inquiry Basket
PCBA Printed Circuit Board Assembly, PCB Assembly service
China PCBA Printed Circuit Board Assembly, PCB Assembly service
1
US$ 2 - 9 / Piece
50 Pieces (Min. Order)
Supplier Details
Inquire Now Add this product to Inquiry Basket
PCBA Printed Circuit Board Assembly
China PCBA Printed Circuit Board Assembly
1
US$ 0.1 - 10 / Piece
1 Piece (Min. Order)
Supplier Details
Inquire Now Add this product to Inquiry Basket
Aluminum LED PCBA /aluminium PCB assemblies,PCB assembly ... New
China Aluminum LED PCBA /aluminium PCB assemblies,PCB assembly lighting
8
US$ 1 - 2 / Set
1 Set (Min. Order)
Freight Cost Available
Supplier Details
Inquire Now Add this product to Inquiry Basket
PCBA Printed Circuit Board Assembly, FR-4 PCBA Assembly
China PCBA Printed Circuit Board Assembly, FR-4 PCBA Assembly
4
US$ 6.66 - 6.88 / Piece
1 Piece (Min. Order)
Freight Cost Available
Supplier Details
Inquire Now Add this product to Inquiry Basket
FR-4 PCB assemblies PCBA prototype OEM service in Shenzhe...
China FR-4 PCB assemblies PCBA prototype OEM service in Shenzhen
3
US$ 1 - 10 / Carton
1 Carton (Min. Order)
Freight Cost Available
Supplier Details
Inquire Now Add this product to Inquiry Basket
FPC Assembly/Flexible PCBA Assembly Service
China FPC Assembly/Flexible PCBA Assembly Service
2
US$ 2 / Piece
1 Piece (Min. Order)
Supplier Details
Inquire Now Add this product to Inquiry Basket
Multilayer PCBs and PCBa assembly with BGA blue soldermas...
China Multilayer PCBs and PCBa assembly with BGA blue soldermask
2
US$ 6.32 - 8.69 / Piece
1 Piece (Min. Order)
Supplier Details
Inquire Now Add this product to Inquiry Basket
Professional pcb assembly pcba manufacturer with one stop...
China Professional pcb assembly pcba manufacturer with one stop service
8
US$ 0.1 / Piece
1 Piece (Min. Order)
Supplier Details
Inquire Now Add this product to Inquiry Basket
Multi-layered PCB Assembly PCBA, Made of FR4 with Bluetoo...
China Multi-layered PCB Assembly PCBA, Made of FR4 with Bluetooth Mode
8
US$ 2 - 2.2 / Unit
1 Unit (Min. Order)
Supplier Details
Inquire Now Add this product to Inquiry Basket
PCBA factory/ PCB assembly factory for electronic product...
China PCBA factory/ PCB assembly factory for electronic products in Shenzhen China
2
US$ 0.1 - 1 / Piece
1 Piece (Min. Order)
Supplier Details
Inquire Now Add this product to Inquiry Basket
One-stop PCBA assembly service, Lead-free tin double-side...
China One-stop PCBA assembly service, Lead-free tin double-sided PCB assembly
1
US$ 1 - 10 / Piece
1 Piece (Min. Order)
Supplier Details
Inquire Now Add this product to Inquiry Basket
2 Layer PCB Manufacturer, Fr4 PCBA Assembly SMD Service New
China 2 Layer PCB Manufacturer, Fr4 PCBA Assembly SMD Service
5
US$ 1 / Piece
1 Piece (Min. Order)
Supplier Details
Inquire Now Add this product to Inquiry Basket
Shenzhen Electronic Component&SMT Circuit Board PCB Assem...
China Shenzhen Electronic Component&SMT Circuit Board PCB Assembly w/SMT Assembly PCBA Services
2
US$ 0.1 - 10 / Unit
1 Unit (Min. Order)
Supplier Details
Inquire Now Add this product to Inquiry Basket
Electronic PCBA assembly services
China Electronic PCBA assembly services
2
US$ 1 / Piece
1 Piece (Min. Order)
Freight Cost Available
Supplier Details
Inquire Now Add this product to Inquiry Basket
High quality pcba assembly with low cost and short lead t... New
China High quality pcba assembly with low cost and short lead time
4
US$ 0.2 - 2 / Piece
1 Piece (Min. Order)
Supplier Details
Inquire Now Add this product to Inquiry Basket
Double sided PCBA assembly SMT
China Double sided PCBA assembly SMT
1
US$ 1 - 1.1 / Piece
1 Piece (Min. Order)
Freight Cost Available
Supplier Details
Inquire Now Add this product to Inquiry Basket
PCBA module assembly, Fr-4 double-sided
China PCBA module assembly, Fr-4 double-sided
PCB Assembly for Humidifier
US $12-15 / Piece
2 Pieces (Min. Order)
Min. Line Spacing: 0.1mm
Min. Line Width: 0.1mm
Base Material: FR-4
Brand Name: Lingfeng
Model Number: F229
Board Thickness: 1.6mm
PCB Assembly for Humidifier
Hangzhou Lingfeng Technology Co., Ltd.
China (Mainland) Trade Assurance
Response Rate
93.3%
Add to Compare Sponsored Listing
Contact Supplier I'm Away
high quality pcb assembly for mini air humidifier
US $1-2 / Piece
100 Pieces (Min. Order)
Place of Origin: Guangdong,China (Mainland)
Brand Name: Jun-Chuang
Model Number: JC-YM-01
Min. Hole Size: 0.8mm
Min. Line Spacing: 0.35mm
Board Thickness: 1.6mm
high quality pcb assembly for mini air humidifier 2 Photos
Zhongshan Junchuang Electronics Technology Co., Ltd.
China (Mainland)
Transaction Level:
As for the air washers, Venta recommends refilling water daily to keep the reservoir nearly full, so the rotating disks will be fully saturated, meaning it will be more effective at humidifying. Every 10 to 14 days, drain and rinse the lower housing and disk stack with warm water, wipe the housing and fan blade with a cloth, then fill and add a dose of 3½ ounces of the company’s water treatment additive.

Note: The additive contains quaternary ammonium cations, or quats, a broad class of disinfectants that have been widely employed for decades. Quats have been linked with increased incidence of asthma, but the conditions that elevate that risk—skin contact, high concentrations, the presence of other cleaning agents, and inhalation of aerosolized quats—are unlikely to occur here. In particular, because quats are nonvolatile and the Venta is an evaporative humidifier, very little vaporization or aerosolization of the additive will occur. Quats are also linked with the development of resistant bacteria and other pathogens; given their heavy use industrially and commercially, the impact of the small quantities used in the Venta is probably inconsequential.

Every six months, do a deep clean by filling the reservoir, adding Venta’s cleaner, and running on low for two hours, followed by rinsing with warm water as usual. To give the housing a thorough cleaning, disassemble the upper housing (no tools required) and wipe the surfaces with a damp cloth.

Evaporators blow moisture through a moistened filter. Fans power the unit and expel the humidity into the air from a single-unit system.

These are more affordable than central humidifiers, but the downside is that they only work in one room at a time. They may also expel too much moisture into the air. This can be problematic for people with asthma, as it raises the likelihood for mold growth.

Impeller humidifiers
Impeller humidifiers work with the help of rotating disks that run at high speeds. These units are often less expensive. They’re also among the most child-friendly devices, because they create cool mist and carry no risk of burns.

Dry sinuses, bloody noses and cracked lips — humidifiers can help soothe these familiar problems caused by dry indoor air. Humidifiers can also help ease symptoms of a cold or another respiratory condition.

But be cautious: Although useful, humidifiers can actually make you sick if they aren't maintained properly or if humidity levels stay too high. If you use humidifiers, be sure to monitor humidity levels and keep your humidifier clean. Dirty humidifiers can breed mold or bacteria. If you have allergies or asthma, talk to your doctor before using a humidifier.

The downside is, like evaporators, they only work for single rooms. They can potentially cause breathing difficulties for people with allergies and asthma when they’re overused.

Flaws but not dealbreakers

Add to Compare Sponsored Listing
Contact Supplier Chat Now!
humidifier electronic circuit board pcb assembly
US $1-50 / Piece
1 Piece (Min. Order)
Place of Origin: Guangdong,China (Mainland)
Surface Finishing: OSP
Min. Line Width: 0.1 0mm
Min. Line Spacing: 0.003"
Copper Thickness: 1oz
Board Thickness: 1.6mm
humidifier electronic circuit board pcb assembly 3 Photos
Zhuhai Sounds Electric Co., Ltd.
China (Mainland)
Response Rate
72.7%
Add to Compare Similar Products
Contact Supplier Leave Messages
Quality OEM ROHS ultrasonic generator power pcba, pcba assembly, ultrasonic humidifier pcb assembly
US $0.1-10 / Piece
1 Piece (Min. Order)
Place of Origin: Guangdong,China (Mainland)
Brand Name: OEM
Model Number: PCB assembly
Min. Hole Size: 0.2mm
Min. Line Width: 0.2mm
Product name: ultrasonic humidifier pcb assembly
Quality OEM ROHS ultrasonic generator power pcba, pcba assembly, ultrasonic humidifier pcb assembly 6 Photos
Shenzhen FS Technology Co., Ltd.
China (Mainland) Trade Assurance
Transaction Level:
14 Transactions(6 months)
20,000+
Response Rate
75.5%
Add to Compare Similar Products
Contact Supplier Leave Messages
Smart Bes Custom PCBA manufacturer electronic circuit board humidifier PCB Assembly
US $0.01-0.1 / Piece
1 Piece (Min. Order)
Min. Hole Size: 0.25mm
Copper Thickness: 0.5-3.0 oz
Base Material: FR4, TG, CEM-1, Aluminium
Brand Name: Smart
Model Number: PCB factory
Board Thickness: 0.4-3.0mm
Smart Bes Custom PCBA manufacturer electronic circuit board humidifier PCB Assembly
Shenzhen S-Mart Electronics Co., Ltd.
China (Mainland) Trade Assurance
Transaction Level:
23 Transactions(6 months)
20,000+
Response Rate
91.6%
Add to Compare Similar Products
Contact Supplier Chat Now!
Ultrasonic Humidifier PCB Board Evaporative Humidifier Circuit Board Medical Humidifier PCB Assembly
US $0.1-19.9 / Piece
1 Piece (Min. Order)
Model Number: PCBA
Base Material: FR-4,teflon,aluminum base,copper base,steel base,high frequency
Surface Finishing: HASL,Leadfree HASL,Immersion gold/silver/Tin,OSP,ENIG
Min. Line Width: 4mil
Copper Thickness: 0.5oz-6oz
Board Thickness: 0.1 to 6.0mm(4 to 240mil)
Ultrasonic Humidifier PCB Board Evaporative Humidifier Circuit Board Medical Humidifier PCB Assembly
Shenzhen Kingsheng Pcba Tech. Co., Ltd.
China (Mainland)
Transaction Level:
Response Rate
63.0%
Add to Compare Similar Products
Contact Supplier Leave Messages
OEM circuit board humidifier pcb assembly
US $0.08-9.8 / Piece
1 Piece (Min. Order)
Brand Name: FS
Base Material: FR-4,Hi-TG FR4,CEM-1,CEM-3, TACONIC, Metal/ceramic/aluminum base
Surface Finishing: HAL, HASL Lead Free, Immersion gold, Gold plating, Gold finger
Min. Hole Size: 0.1mm (4mil)
Min. Line Width: 1/2 oz. copper .003" +/- .0005" (0.0762mm)
Min. Line Spacing: 1/2 oz. copper .003" +/- .0005" (0.0762mm)
OEM circuit board humidifier pcb assembly 4 Photos
Shenzhen FS Technology Co., Ltd.
China (Mainland) Trade Assurance
Transaction Level:
2 Transactions(6 months)
1,000+
Response Rate
84.8%
Add to Compare Similar Products
Contact Supplier Chat Now!
OEM Ultrasonic Humidifier PCB Assembly with High Quality
US $0.5-9 / Piece
1 Piece (Min. Order)
Min. Hole Size: 0.25mm
Number of Layers: 2 Layer
Min. Line Width: 0.075mm
Surface Finishing: Lead-free HASL/HASL/ENIG/Immerstion Gold/Silver
Base Material: FR-4
Board Thickness: 0.5~3.2mm
OEM Ultrasonic Humidifier PCB Assembly with High Quality 6 Photos
Shenzhen Eastwin Trading Ltd.
China (Mainland) Trade Assurance
Transaction Level:
87 Transactions(6 months)
590,000+
Response Rate
73.9%
Add to Compare Similar Products
Contact Supplier Chat Now!
Advanced technology Bom list humidifier pcba pcb assembly
US $0.2-10 / Piece
1 Piece (Min. Order)
Place of Origin: Guangdong,China (Mainland)
Base Material: FR-4/aluminum/ceramic/cem-3/FR-1
Min. Line Width: 0.075mm
Min. Line Spacing: 0.075mm
Copper Thickness: 0.25 Oz -12 Oz
Application: Electronics Device
Advanced technology Bom list humidifier pcba pcb assembly 6 Photos
Gesp Technology (Dalian) Co., Ltd.
China (Mainland) Trade Assurance
Transaction Level:
3 Transactions(6 months)
900+
Response Rate
89.8%
Add to Compare Similar Products
Contact Supplier Chat Now!
Electronics PCBA Manufacturer ,PCBA Assembly,pcb assembly manufacturer humidifier pcba
US $0.3-1.0 / Pieces
20 Pieces (Min. Order)
Place of Origin: Guangdong,China (Mainland)
Brand Name: Golden Weald
Surface Finishing: OSP HASL Immersion Gold
Min. Line Width: 0.15mm
Copper Thickness: 35um
Board Thickness: 0.4-1.6mm
Electronics PCBA Manufacturer ,PCBA Assembly,pcb assembly manufacturer humidifier pcba 6 Photos
Shenzhen Golden Weald Electronic Co., Limited
China (Mainland)
Transaction Level:
2 Transactions(6 months)
4,000+
Response Rate
85.0%
Add to Compare Similar Products
Contact Supplier Chat Now!
Custom PCBA manufacturing electronic circuit board for humidifier PCB Assembly
US $0.03-5.03 / Piece
1 Piece (Min. Order)
Place of Origin: Guangdong,China (Mainland)
Model Number: ZITROK-PCB16120801
Base Material: FR4/ROGERS/PET/HDI/CEM
Surface Finishing: ENIG, Lead free HASL , gold plating, immersion tin and gold finger
Min. Line Spacing: 4mil
Copper Thickness: 0.5oz~3oz
Custom PCBA manufacturing electronic circuit board for humidifier PCB Assembly 4 Photos
Shenzhen ZITROK Electronics Co., Limited
China (Mainland)
Transaction Level:
4 Transactions(6 months)
4,000+
Response Rate
72.0%
Add to Compare Similar Products
Contact Supplier Chat Now!
For native market : Ultrasonic Humidifier assembly / Humidifier PCB circuit board / Ultrasonic Humidifier PCB , CN004001
US $0.1-15 / Piece
1 Piece (Min. Order)
Min. Line Spacing: 3MIL
Min. Hole Size: 0.1MM
Copper Thickness: 1oz
Min. Line Width: 3MIL
Place of Origin: Guangdong,China (Mainland)
Model Number: CN004001
For native market : Ultrasonic Humidifier assembly / Humidifier PCB circuit board / Ultrasonic Humidifier PCB , Electronic PCBA Manufacturer PCB Design and SMT PCB Assembly for Air Cooler/ Air Purifier/ Humidifier with remote control
US $1-50 / Piece
1000 Pieces (Min. Order)
Place of Origin: Guangdong,China (Mainland)
Brand Name: OEM/ODM
Model Number: Turnkey
Min. Line Width: 0.075mm/0.1mm(3mil/4mil)
Min. Line Spacing: 0.003"
Product name: Pcb
Electronic PCBA Manufacturer PCB Design and SMT PCB Assembly for Air Cooler/ Air Purifier/ Humidifier with remote control 6 Photos
Shenzhen Fumax Technology Co., Ltd.
China (Mainland) Trade Assurance
Transaction Level:
10 Transactions(6 months)
710,000+
Response Rate
65.6%
Add to Compare Sponsored Listing
Contact Supplier Leave Messages
Double sided pcb manufacture double sided pcba assembly pcba for refrigerator
US $0.8-10.9 / Piece
1 Piece (Min. Order)
Place of Origin: Guangdong,China (Mainland)
Model Number: pcba for refrigerator
Min. Hole Size: 0.2mm
Min. Line Spacing: 0.15mm
Copper Thickness: 35um
Board Thickness: 1.6mm
Double sided pcb manufacture double sided pcba assembly pcba for refrigerator 6 Photos
Shenzhen Golden Weald Electronic Co., Limited
China (Mainland)
Transaction Level:
2 Transactions(6 months)
Steam vaporizers
Steam vaporizers are electrically powered. They heat water, and then cool it before expelling it into the air. These are the most inexpensive and portable humidifiers. You can purchase them at drugstores.

The Honeywell’s evaporative technology (as opposed to ultrasonic or warm mist), avoids problems common to the other methods, like overhumidification, pools of condensed water around the base, and white mineral dust building up on nearby surfaces. The HCM-350 Germ Free Cool Mist Humidifier is easier to keep clean than nearly every other humidifier we’ve tested, because every part that touches water is free of electronic components and lacks the sharp angles that harbor buildup. And the HCM-350 is the only humidifier we’ve found that has a seamless, molded reservoir, which eliminates a problem common in inferior models: leaks. Evaporative humidifiers like this are not the most powerful type, but in less than two hours, the Honeywell reaches and maintains a comfortable level of humidity in a room up to about 400 square feet.

Runner-up

Buy from Amazon
*At the time of publishing, the price was $63.

Similar, with some flaws
Sunpentown SU-9210 Digital Evaporative Humidifier
This costs a bit more than our pick and doesn’t have a one-piece reservoir, but it offers comparable performance should our pick go out of stock.
If the Honeywell is unavailable, the Sunpentown SU-9210 is our runner-up pick. It performs very similarly to the Honeywell and is easy to clean because it also has no electronic components inside that touch water. It even adds a humidistat (which is accurate, according to our testing). However, the SU-9210 costs a bit more up front, has annoying beeping buttons, and lacks a one-piece reservoir, which could lead to leaks in the long run. Like the Honeywell, its evaporative humidifying mechanism doesn’t have as much power as an ultrasonic model, and it reaches its limit in a room of about 400 square feet.

Wirecutter senior editor Michael Zhao and Sweethome writer Kevin Purdy have each used a Honeywell HCM-350 for several winters.

Michael, who lives in a radiator-heated New York City apartment and uses the Honeywell in the bedroom, said, “It’s so easy to clean that I actually clean it. Which is pretty great.” Cleaning is also really important—and ease of cleaning is one of our main reasons for recommending the Honeywell. Michael adds that “it’s annoying that the fan collects dust, but I’ve found that the protective screen comes off cleanly if you give it a good tug with needlenose pliers.” That allows him to wipe the fan off (and reinstall the screen) without much fuss. After moving from an apartment with a standard 8-foot ceiling to one with 12-foot ceilings—a big jump in volume if not area, as both rooms are about 150 square feet—Michael noted an apparent drop-off in absolute humidification, but also notes that the unit is still effective at reducing the symptoms of dry air, such as waking with a dry throat. Additionally, he owns a cat, and has found that the wick collects pet hair; a weekly vacuuming (a 2-minute job) clears that up.

Kevin and his wife live in a forced-air-heated Victorian house in Buffalo, New York; it gets very dry in the winter, and they also use their Honeywell in the bedroom. Kevin admits to being “an anti-hypochondriac” and “on the far left end of maintenance,” meaning he doesn’t clean his unit with any sense of urgency. He has generally given the Honeywell’s reservoir a scrub with dish soap once a week, and not cleaned the base plate or the filter with any regularity. He also has let water sit in the reservoir for days at a time. He adds: “I have not had anything bad happen to me.” Fine, but honestly, he should follow manufacturer guidelines for any humidifier, or else risk serious illness; in the case of the Honeywell, that includes a daily rinse of the reservoir and base unit, and occasional cleaning and drying of the wick and sterilization of the other wet parts. In terms of the HCM-350’s performance, Kevin says: “It works really well, and it doesn’t look terribly ugly in our bedroom. It hides in a corner and does the job.”
Add to Compare Similar Products
Contact Supplier Chat Now!
OEM air purifier PCB and PCBA electronic manufacturing services and design manufacturer for air cooler/humidifier pcb assembly
US $1-100 / Piece
1 Piece (Min. Order)
Model Number: LXT161019-29
Base Material: FR-4,CEM-3,FR-1,Taconic,Rogers, ALU, PL-Custom
Surface Finishing: HASL, Immersion Gold/Au, Immersion Silver, OSP, etc.
Min. Hole Size: 1mm
Min. Line Width: 0.01mm
Board Thickness: 1.8mm
OEM air purifier PCB and PCBA electronic manufacturing services and design manufacturer for air cooler/humidifier pcb assembly 4 Photos
Shenzhen Leadsintec Co., Ltd.
China (Mainland)
Transaction Level:
Response Rate
46.9%
Add to Compare Similar Products
Contact Supplier Chat Now!
PCB Assembly For Household Appliance Humidifier PCBA Electronic Pcb Assembly & Manufacturer
US $3.0-4.0 / Pieces
1000 Pieces (Min. Order)
Place of Origin: Fujian,China (Mainland)
Surface Finishing: ENIG
Min. Line Width: 0.1mm/4mi
Min. Line Spacing: 0.1um(3mil)
Copper Thickness: 1oz
Board Thickness: 0.2-3.0mm
PCB Assembly For Household Appliance Humidifier PCBA Electronic Pcb Assembly & Manufacturer 3 Photos
Xiamen Chipsun Science & Technology Co., Ltd.
China (Mainland) Trade Assurance
Transaction Level:
11 Transactions(6 months)
460,000+
Response Rate
25.0%
Add to Compare Similar Products
Contact Supplier Leave Messages
Smart Electronics~ professional oem manufacturing Humidifier PCBA with UL, Printed Circuit Board Assembly
US $0.01-0.1 / Piece
1 Piece (Min. Order)
Model Number: A492
Surface Finishing: spray tin,HASL, lead free, immersion gold,Gold-plate, OSP, ENIG etc
Min. Hole Size: 0.25mm
Min. Line Width: 0.2mm
Min. Line Spacing: 0.2mm
Copper Thickness: 0.5-2.0 oz
Smart Electronics~ professional oem manufacturing Humidifier PCBA with UL, Printed Circuit Board Assembly 6 Photos
Shenzhen S-Mart Electronics Co., Ltd.
China (Mainland) Trade Assurance
Transaction Level:
23 Transactions(6 months)
20,000+
Response Rate
91.6%
Add to Compare Similar Products
Contact Supplier Chat Now!
High Precision Electronic Humidifier PCB manufacturer in shenzhen
US $0-10 / Piece
0 Pieces (Min. Order)
Base Material: FR4
Surface Finishing: HASL/Lead Free HASL/OSP/Gold Plating/Immersion Gold/ENIG
Min. Hole Size: 0.25mm
Min. Line Width: 0.1mm
Board Thickness: 1.6mm
Product name: PCB
High Precision Electronic Humidifier PCB manufacturer in shenzhen 6 Photos
Wells Electronic Technology Ltd.
China (Mainland) Trade Assurance
Transaction Level:
4 Transactions(6 months)
1,000+
Response Rate
57.1%
Add to Compare Similar Products
Contact Supplier Chat Now!
best price 2 layer printed circuit boards maker humidifier pcb
US $1-10 / Piece
1 Piece (Min. Order)
Model Number: PCB assembly manufacturer
Surface Finishing: HASL/ ENIG /OSP,ENIG HASL OSP
Min. Hole Size: 0.2mm(8mil)
Min. Line Width: 0.1mm(4mil)
Min. Line Spacing: 0.1mm(4mil)
Type: best price 2 layer printed circuit boards maker humidifier pcb
best price 2 layer printed circuit boards maker humidifier pcb 3 Photos
BLD Electronic Co., Ltd.
China (Mainland) Trade Assurance
Transaction Level:
6 Transactions(6 months)
70,000+
Response Rate
90.5%
Add to Compare Similar Products
Contact Supplier Chat Now!
Shenzhen inverter controll pcba humidifier switch pcba medical electronics pcba manufacturer with ISO13485 Certification
US $0.1-4.3 / Piece
1 Piece (Min. Order)
Copper Thickness: 0.5-5.0oz
Number of Layers: 10-Layer
Surface Finishing: HASL/ Lead Fres/Immersion
Base Material: FR2/FR4/FR5/CEM1
Brand Name: BQC
Board Thickness: 1.6mm
Shenzhen inverter controll pcba humidifier switch pcba medical electronics pcba manufacturer with ISO13485 Certification 6 Photos
Shenzhen Baiqiancheng Electronic Co., Ltd.
China (Mainland) Trade Assurance
Transaction Level:
1 Transaction(6 months)
200+
Response Rate
81.8%
Add to Compare Similar Products
Contact Supplier Chat Now!
Custom PCBA manufacturing electronic circuit board for humidifier PCB Assembly
US $0.03-5.03 / Piece
1 Piece (Min. Order)
Place of Origin: Guangdong,China (Mainland)
Model Number: ZITROK-PCB16120801
Base Material: FR4/ROGERS/PET/HDI/CEM
Surface Finishing: ENIG, Lead free HASL , gold plating, immersion tin and gold finger
Min. Line Spacing: 4mil
Copper Thickness: 0.5oz~3oz
Custom PCBA manufacturing electronic circuit board for humidifier PCB Assembly 4 Photos
Shenzhen ZITROK Electronics Co., Limited
China (Mainland)
Transaction Level:
4 Transactions(6 months)
4,000+
Response Rate
72.0%
Add to Compare Similar Products
Contact Supplier Chat Now!
China Best humidifier pcb circuit board
US $1-12.99 / Piece
10 Pieces (Min. Order)
Min. Hole Size: 0.004"
Copper Thickness: 1oz
Min. Line Width: 0.075/3mil
Surface Finishing: HASL
Place of Origin: Guangdong,China (Mainland)
Base Material: FR-4
China Best humidifier pcb circuit board 6 Photos
Shenzhen Ciree Technology Ltd.
China (Mainland) Trade Assurance
Transaction Level:
4 Transactions(6 months)
900+
Response Rate
73.1%
Add to Compare Similar Products
Contact Supplier Chat Now!
Manufacturer Supplier SMT assembly mobile charger pcb circuit board
US $1-2 / Piece
500 Pieces (Min. Order)
Model Number: humidifier
Base Material: CEM-1
Min. Hole Size: 0.8mm
Min. Line Spacing: 0.35mm
Copper Thickness: 2oz
Board Thickness: 1.6mm
Manufacturer Supplier SMT assembly mobile charger pcb circuit board 6 Photos
Zhongshan Junchuang Electronics Technology Co., Ltd.
China (Mainland)
Transaction Level:
Response Rate
66.7%
Add to Compare Similar Products
Contact Supplier Chat Now!
Breast pump,milk-pump,humalastor PCBA board,SMT&SMD PCB Assembly manufacturer
1 Perch (Min. Order)
Place of Origin: Guangdong,China (Mainland)
Brand Name: Xing Da
Surface Finishing: Immersion Gold/Au,HASL,OSP,etc.
Min. Line Width: 0.075mm(3mil)
Min. Line Spacing: 0.1mm4mil)
Board Thickness: 0.2mm-6.00 mm(8mil-126mil)
Breast pump,milk-pump,humalastor PCBA board,SMT&SMD PCB Assembly manufacturer
Shenzhen Xin Da Xing Electronic Tech Co., Ltd.
China (Mainland) Trade Assurance
Transaction Level:
3 Transactions(6 months)
100+
Response Rate
90.0%
Add to Compare Similar Products
Contact Supplier Chat Now!
8 layers humidifier home appliance controller pcb circuit board manufacturer
US $0.1-10 / Piece
1 Piece (Min. Order)
Copper Thickness: 1oz
Min. Line Width: 0.15mm
Surface Finishing: white,black,ect
Brand Name: xjypcb
Model Number: xjypcb
Board Thickness: 1.6mm,0.4/0.6/0.8/1.0/1.2/1.6/2.0/2.4/3.0mm
8 layers humidifier home appliance controller pcb circuit board manufacturer
Shenzhen Xinjiaye Electronics Technology Co., Ltd.
China (Mainland)
Transaction Level:
Response Rate
61.8%
Add to Compare Similar Products
Contact Supplier Chat Now!
Humidifier Controller/PCB design
US $1-100 / Piece
10 Pieces (Min. Order)
Min. Hole Size: 0.3mm
Number of Layers: 1-12 LAYERS
Surface Finishing: HASL, Flash gold, Immersion gold, Gold finger, Carbon ink
Base Material: FR1, FR2, CEM1, CEM3, FR4, BT
Brand Name: DK
Model Number: DK
Humidifier Controller/PCB design
Global Design Tech Electronics Co., Ltd. (Wuxi, Jiangsu, China)
China (Mainland)
Response Rate
0.0%
Add to Compare Similar Products
Contact Supplier Leave Messages
Custom Bom List Manufacturing Electronic Humidifier PCB Assembly
US $2-10 / Piece
5 Pieces (Min. Order)
Min. Hole Size: 0.2mm
Copper Thickness: 0.25 Oz -12 Oz
Min. Line Width: 0.1mm
Place of Origin: Guangdong,China (Mainland)
Model Number: Customized
Board Thickness: 0.005"-0.250"
Custom Bom List Manufacturing Electronic Humidifier PCB Assembly 6 Photos
Gesp Technology (Dalian) Co., Ltd.
China (Mainland) Trade Assurance
Transaction Level:
3 Transactions(6 months)
900+
Response Rate
89.8%
Add to Compare Similar Products
Contact Supplier Chat Now!
pcba for humidifier shenzhen electronics pcb assembly pcba oem & odm
US $0.15-17 / Piece
10 Pieces (Min. Order)
Brand Name: Golden Weald
Base Material: FR4
Min. Hole Size: 0.2mm
Min. Line Width: 0.15mm
Min. Line Spacing: 0.15mm
Copper Thickness: 1-12oz
pcba for humidifier shenzhen electronics pcb assembly pcba oem & odm 6 Photos
Shenzhen Golden Weald Electronic Co., Limited
China (Mainland)
Transaction Level:
2 Transactions(6 months)
4,000+
Response Rate
85.0%
Add to Compare Similar Products
Contact Supplier Chat Now!
Smart Bes Custom PCBA manufacturer electronic circuit board humidifier PCB Assembly
US $0.01-0.1 / Piece
1 Piece (Min. Order)
Min. Hole Size: 0.25mm
Copper Thickness: 0.5-3.0 oz
Base Material: FR4, TG, CEM-1, Aluminium
Brand Name: Smart
Model Number: PCB factory
Board Thickness: 0.4-3.0mm
Smart Bes Custom PCBA manufacturer electronic circuit board humidifier PCB Assembly
Shenzhen S-Mart Electronics Co., Ltd.
China (Mainland) Trade Assurance
Transaction Level:
23 Transactions(6 months)
Low humidity can increase your likelihood of getting colds, flu and other upper respiratory ailments. Viruses that cause colds and flu thrive in low humidity. And, according to The American Society of Otolaryngology, dry air can make people more susceptible to infection. In addition, drier air can aggravate allergy and asthma symptoms.

Low humidity can cause home damage. It causes walls, woodwork, and your beautiful hardwood floors to crack. Electronics can fall victim to static electric charges, requiring expensive repair or replacement.

Low humidity can cause higher energy costs. Low humidity can make you feel too cold at normal temperatures leading you to turn up the thermostat. This leads to higher energy bills.

Beyond the damage low humidity causes, it makes you uncomfortable. It can cause:

Bloody noses
Dry mouth and dry, itchy eyes
Sore throats
Cracked, itchy skin
Painful static shocks
To learn more about the effects of low humidity on your health and home, watch our Total Comfort Humidification video.

This type can cause burns, so it’s not the most kid-friendly.

Ultrasonic humidifiers
Ultrasonic humidifiers produce a cool mist with the help of ultrasonic vibration. The units vary in price, depending on the size you need for your home. Both cool and warm mist versions are available.

An ultrasonic humidifier — especially the cool-mist version — is a good choice if you have children.

Central humidifiers are built into home heating and air conditioning systems and are designed to humidify the whole house.
Ultrasonic humidifiers produce a cool mist with ultrasonic vibration.
Impeller humidifiers produce a cool mist with a rotating disk.
Evaporators use a fan to blow air through a wet wick, filter or belt.
Steam vaporizers use electricity to create steam that cools before leaving the machine. Avoid this type of humidifier if you have children; hot water inside this type of humidifier may cause burns if spilled.
Ideal humidity levels
Add to Compare Similar Products
Contact Supplier Chat Now!
Custom PCBA manufacturer electronic circuit board for humidifier PCB Assembly
US $1-10 / Piece
50 Pieces (Min. Order)
Place of Origin: Guangdong,China (Mainland)
Model Number: Electronic Humidifier pcba
Base Material: FR4
Surface Finishing: HASL/ENIG
Min. Line Width: 0.1mm
Copper Thickness: 1/2OZ 1OZ 2OZ 3OZ
Custom PCBA manufacturer electronic circuit board for humidifier PCB Assembly 2 Photos
Shenzhen Leadsintec Co., Ltd.
China (Mainland)
Transaction Level:
Response Rate
46.9%
Add to Compare Similar Products
Contact Supplier Leave Messages
wholesale Shenzhen Manufacturer LED Tube Light PCB Assembly
US $1-2 / Piece
500 Pieces (Min. Order)
Place of Origin: Guangdong,China (Mainland)
Brand Name: Jun-Chuang
Base Material: CEM-1
Min. Hole Size: 0.8mm
Min. Line Width: 0.35mm
Min. Line Spacing: 0.35mm
wholesale Shenzhen Manufacturer LED Tube Light PCB Assembly 6 Photos
Zhongshan Junchuang Electronics Technology Co., Ltd.
China (Mainland)
Transaction Level:
Response Rate
66.7%
Add to Compare Similar Products
Contact Supplier Chat Now!
Professional multilayer mcpcb humidifier pcb
US $1-10 / Piece
1 Piece (Min. Order)
Place of Origin: Liaoning,China (Mainland)
Brand Name: BLD
Base Material: FR-4 epoxy resin,fr-4,cem-1,cem-3
Min. Hole Size: 0.2mm(8mil)
Copper Thickness: 1/2OZ 1OZ 2OZ 3OZ
Type: Professional multilayer mcpcb humidifier pcb
Professional multilayer mcpcb humidifier pcb 3 Photos
BLD Electronic Co., Ltd.
China (Mainland) Trade Assurance
Transaction Level:
6 Transactions(6 months)
70,000+
Response Rate
90.5%
Add to Compare Similar Products
Contact Supplier Chat Now!
HDI FR4 pcb assembly manufacturer for humidifier
US $1-3 / Piece
5 Pieces (Min. Order)
Place of Origin: Guangdong,China (Mainland)
Brand Name: Xing Da
Model Number: XD-PCBA-13
Min. Line Width: 0.075mm(3mil)
Min. Line Spacing: 0.1mm(4mil)
Board Thickness: 0.2mm-6mm(8mil-126mil)
HDI FR4 pcb assembly manufacturer for humidifier
Shenzhen Xin Da Xing Electronic Tech Co., Ltd.
China (Mainland) Trade Assurance
Transaction Level:
3 Transactions(6 months)
100+
Response Rate
90.0%
Add to Compare Similar Products
Contact Supplier Chat Now!
Electronics PCBA Manufacturer ,PCBA Assembly,pcb assembly manufacturer humidifier pcba
US $0.3-1.0 / Pieces
20 Pieces (Min. Order)
Place of Origin: Guangdong,China (Mainland)
Brand Name: Golden Weald
Surface Finishing: OSP HASL Immersion Gold
Min. Line Width: 0.15mm
Copper Thickness: 35um
Board Thickness: 0.4-1.6mm
Electronics PCBA Manufacturer ,PCBA Assembly,pcb assembly manufacturer humidifier pcba 6 Photos
Shenzhen Golden Weald Electronic Co., Limited
China (Mainland)
Transaction Level:
2 Transactions(6 months)
4,000+
Response Rate
85.0%
Add to Compare Similar Products
Contact Supplier Chat Now!
Intelligent humidifier PCBA mount board,SMT&SMD PCB Assembly
US $1-10 / Piece
50 Pieces (Min. Order)
Brand Name: Leadsintec
Model Number: Electronic Humidifier pcba
Base Material: FR4
Surface Finishing: HASL/ENIG
Min. Hole Size: 0.2mm
Min. Line Spacing: 0.1mm
Intelligent humidifier PCBA mount board,SMT&SMD PCB Assembly
Shenzhen Leadsintec Co., Ltd.
China (Mainland)
Transaction Level:
Response Rate
46.9%
Add to Compare Similar Products
Contact Supplier Leave Messages
Manufacturer Supplier electronic component assembly pcb circuit board
US $1-2 / Piece
500 Pieces (Min. Order)
Place of Origin: Guangdong,China (Mainland)
Model Number: humidifier
Base Material: CEM-1
Min. Hole Size: 0.8mm
Min. Line Width: 0.35mm
Min. Line Spacing: 0.35mm
Manufacturer Supplier electronic component assembly pcb circuit board 6 Photos
Zhongshan Junchuang Electronics Technology Co., Ltd.
China (Mainland)
Transaction Level:
Response Rate
66.7%
Add to Compare Similar Products
Contact Supplier Chat Now!
Electronics PCBA Manufacturer ,PCBA Assembly,pcb assembly manufacturer house appliances pcba
US $0.1-10.6 / Piece
1 Piece (Min. Order)
Place of Origin: Guangdong,China (Mainland)
Brand Name: Golden Weald
Base Material: FR4
Min. Hole Size: 0.2mm
Min. Line Width: 0.15mm
Board Thickness: 1.6mm
Electronics PCBA Manufacturer ,PCBA Assembly,pcb assembly manufacturer house appliances pcba 6 Photos
Shenzhen Golden Weald Electronic Co., Limited
China (Mainland)
Transaction Level:
2 Transactions(6 months)
4,000+
Response Rate
85.0%
Add to Compare Similar Products
Contact Supplier Chat Now!
China manufacturer electronic circuit board pcb assembly service
US $1-2 / Piece
500 Pieces (Min. Order)
Place of Origin: Guangdong,China (Mainland)
Brand Name: Jun-Chuang
Base Material: CEM-1
Min. Hole Size: 0.8mm
Copper Thickness: 2oz
Board Thickness: 1.6mm
China manufacturer electronic circuit board pcb assembly service 6 Photos
Zhongshan Junchuang Electronics Technology Co., Ltd.
China (Mainland)
Transaction Level:
Response Rate
66.7%
Add to Compare Similar Products
Contact Supplier Chat Now!
Electronic PCBA service PCB assembly manufacturing
US $1-50 / Piece
1 Piece (Min. Order)
Min. Line Width: 0.15mm
Copper Thickness: 1oz (customized)
Board Thickness: 1.6mm (customized)
Base Material: FR-1
Brand Name: SOUNDS
Surface Finishing: HASL Lead Free
Electronic PCBA service PCB assembly manufacturing 6 Photos
Zhuhai Sounds Electric Co., Ltd.
China (Mainland)
Response Rate
72.7%
Add to Compare
Contact Supplier Chat Now!
Electronics PCBA Manufacturer ,PCBA Assembly,pcb assembly manufacturer led pcba/led mcpcb
Add to Compare Similar Products
Contact Supplier Leave Messages
Custom PCBA manufacturer electronic circuit board for humidifier PCB Assembly
US $1-10 / Piece
50 Pieces (Min. Order)
Place of Origin: Guangdong,China (Mainland)
Model Number: Electronic Humidifier pcba
Base Material: FR4
Surface Finishing: HASL/ENIG
Min. Line Width: 0.1mm
Copper Thickness: 1/2OZ 1OZ 2OZ 3OZ
Custom PCBA manufacturer electronic circuit board for humidifier PCB Assembly 2 Photos
Shenzhen Leadsintec Co., Ltd.
China (Mainland)
Transaction Level:
Response Rate
46.9%
Add to Compare Similar Products
Contact Supplier Leave Messages
Full turnkey Humidifier EMS OEM PCB Assembly
US $0.5-15 / Piece
1 Piece (Min. Order)
Min. Line Spacing: 0.075mm(3mil)
Min. Hole Size: 0.075mm(3mil)
Min. Line Width: 0.075mm(3mil)
Surface Finishing: Lead free HASL/Rohs complaince
Place of Origin: Guangdong,China (Mainland)
Base Material: FR4
Full turnkey Humidifier EMS OEM PCB Assembly
Shenzhen Baiqiancheng Electronic Co., Ltd.
China (Mainland) Trade Assurance
Transaction Level:
1 Transaction(6 months)
200+
Response Rate
81.8%
Add to Compare Similar Products
Contact Supplier Chat Now!
SMT Fresh ultrasonic humidifier PCB assembly , Fresh ultrasonic humidifier PCBA manufacturer from china
US $1-60 / Unit
1 Unit (Min. Order)
Copper Thickness: 0.5oz-6oz
Number of Layers: 12-Layer
Place of Origin: Guangdong,China (Mainland)
Brand Name: C-Alley
Model Number: PCBA
Board Thickness: 0.1 to 6.0mm(4 to 240mil)
SMT Fresh ultrasonic humidifier PCB assembly , Fresh ultrasonic humidifier PCBA manufacturer from china
Shenzhen Kingsheng PCBA Tech. Co., Ltd.
China (Mainland)
Transaction Level:
Add to Compare Similar Products
Contact Supplier Chat Now!
high quality low price humidifier led pcb printed circuit board assembly
US $0.5-5 / Piece
1 Piece (Min. Order)
Place of Origin: Guangdong,China (Mainland)
Brand Name: NOEYA
Model Number: Air Condition
Surface Finishing: HASL,Lead Free HASL, OSP
Min. Line Width: 0.1MM
Copper Thickness: 0.5-3.0oz
high quality low price humidifier led pcb printed circuit board assembly 5 Photos
Shenzhen Noeya Technology Co., Ltd.
China (Mainland)
Transaction Level:
2 Transactions(6 months)
6,000+
Response Rate
83.1%
Add to Compare Similar Products
Contact Supplier Chat Now!
PCB Assembly For Household Appliance Humidifier PCBA Electronic Pcb Assembly & Manufacturer
US $3.0-4.0 / Pieces
1000 Pieces (Min. Order)
Place of Origin: Fujian,China (Mainland)
Surface Finishing: ENIG
Min. Line Width: 0.1mm/4mi
Min. Line Spacing: 0.1um(3mil)
Copper Thickness: 1oz
Board Thickness: 0.2-3.0mm
PCB Assembly For Household Appliance Humidifier PCBA Electronic Pcb Assembly & Manufacturer 3 Photos
Xiamen Chipsun Science & Technology Co., Ltd.
China (Mainland) Trade Assurance
Transaction Level:
11 Transactions(6 months)
460,000+
Response Rate
25.0%
Add to Compare Similar Products
Contact Supplier Leave Messages
humidifier pcb assembly
US $0.1-5 / Piece
1 Piece (Min. Order)
Base Material: FR-4/High TG FR-4/CEM-3/CEM-1/Al-base...
Board Thickness: mm
Copper Thickness: OZ- OZ
Surface Finishing: humidifier pcb assembly
Certificate:: CE,FCC,UL,SGS,ROHS,ISO9001
Solder mask: Green,Blue,Black,White,Red,Yellow...
humidifier pcb assembly 6 Photos
Shenzhen YSONIX Tech Co., Ltd.
China (Mainland) Trade Assurance
Add to Compare
Contact Supplier Chat Now!
high quality pcba for humidifier, circuit board humidifier assembly
US $1-25 / Piece
1 Piece (Min. Order)
Brand Name: HUA XING
Base Material: FR-4
Min. Hole Size: 0.1mm
Min. Line Width: 0.075mm=3mil
Min. Line Spacing: 0.075mm=3mil
Board Thickness: 1.6mm
high quality pcba for humidifier, circuit board humidifier assembly
Shenzhen Huaxing PCBA Limited
China (Mainland) Trade Assurance
Transaction Level:
15 Transactions(6 months)
90,000+
Response Rate
88.5%
Add to Compare Similar Products
Contact Supplier Chat Now!
Electronic PCBA Manufacturer PCB Design and SMT PCB Assembly for Air Cooler/ Air Purifier/ Humidifier with remote control
US $1-50 / Piece
1000 Pieces (Min. Order)
Place of Origin: Guangdong,China (Mainland)
Brand Name: OEM/ODM
Model Number: Turnkey
Min. Line Width: 0.075mm/0.1mm(3mil/4mil)
Min. Line Spacing: 0.003"
Product name: Pcb
Electronic PCBA Manufacturer PCB Design and SMT PCB Assembly for Air Cooler/ Air Purifier/ Humidifier with remote control 6 Photos
Shenzhen Fumax Technology Co., Ltd.
China (Mainland) Trade Assurance
Transaction Level:
10 Transactions(6 months)
710,000+
Response Rate
65.6%
Add to Compare Similar Products
Contact Supplier Leave Messages
Professional Security Alarm Systems PCB &PCBA Assembly
US $1-2 / Piece
500 Pieces (Min. Order)
Model Number: humidifier
Base Material: CEM-1
Surface Finishing: Tin plated
Min. Hole Size: 0.8mm
Min. Line Spacing: 0.35mm
Copper Thickness: 2oz
Professional Security Alarm Systems PCB &PCBA Assembly 6 Photos
Zhongshan Junchuang Electronics Technology Co., Ltd.
China (Mainland)
Transaction Level:
Response Rate
66.7%
Add to Compare Similar Products
Contact Supplier Leave Messages
Intelligent humidifier PCBA mount board,SMT&SMD PCB Assembly
1 Perch (Min. Order)
Place of Origin: Guangdong,China (Mainland)
Brand Name: Xing Da
Base Material: FR-4,FR2.Taconic,Rogers, CEM-1 CEM-3,ceramic,crockery,Metal,Carbon
Min. Line Width: 0.075mm(3mil)
Copper Thickness: 1/2 oz min;12 oz max
Board Thickness: 0.2mm-6.00 mm(8mil-126mil)
Intelligent humidifier PCBA mount board,SMT&SMD PCB Assembly
Shenzhen Xin Da Xing Electronic Tech Co., Ltd.
China (Mainland) Trade Assurance
Transaction Level:
3 Transactions(6 months)
100+
Response Rate
90.0%
Add to Compare Similar Products
Contact Supplier Chat Now!
PCB Assembly for humidifier
US $1-10 / Unit
10 Units (Min. Order)
Place of Origin: Guangdong,China (Mainland)
Model Number: PCB Assembly for Radio
Base Material: FR-4,CEM-3,Taconic,Rogers,ALU,FR-1
Min. Hole Size: 0.2mm
Min. Line Width: 3mil
Min. Line Spacing: 3mil
PCB Assembly for humidifier
Shenzhen Fullwill Technology Co., Ltd.
China (Mainland)
Response Rate
50.0%
Add to Compare Similar Products
Contact Supplier Leave Messages
pcb assembly/pcba/pcb and component supplier
US $1-100 / Pack
1000 Pieces (Min. Order)
Place of Origin: Guangdong,China (Mainland)
Brand Name: YQ002
Base Material: FR4
Surface Finishing: Gold, Immersion gold Immersion Gold
Min. Line Width: 3mil
Min. Line Spacing: 3mil
pcb assembly/pcba/pcb and component supplier
Dongguan Qingxi Jin Huang Electronics Factory
China (Mainland)
Response Rate
50.0%
Add to Compare Similar Products
Contact Supplier Chat Now!
pcb factory customized humidifier control pcb , pcb & pcba
US $5.0-50.0 / Set
1 Set (Min. Order)
Place of Origin: Zhejiang,China (Mainland)
Brand Name: SPT
Base Material: FR-4
Surface Finishing: HASL
Min. Line Width: 0.075mm(3mil)
Copper Thickness: 0.5-4.0oz
pcb factory customized humidifier control pcb , pcb & pcba 6 Photos
Hangzhou Shibode Technology Co., Ltd.
China (Mainland)
Transaction Level:
Response Rate
70.0%
Add to Compare Similar Products
Contact Supplier Chat Now!
Hot sell Electronic Humidifier circuit board with good qulity
US $0.5-1 / Piece
1 Piece (Min. Order)
Place of Origin: Guangdong,China (Mainland)
Brand Name: Senyan
Model Number: SY-2L001
Base Material: FR-4
Min. Line Width: 0.1 0mm
Board Thickness: 1.6mm
Hot sell Electronic Humidifier circuit board with good qulity 6 Photos
Shenzhen Senyan Circuit Co., Ltd.
China (Mainland) Trade Assurance
Transaction Level:
3 Transactions(6 months)
5,000+
Response Rate
65.4%
Add to Compare Similar Products
Contact Supplier Chat Now!
Double side SMT PCB custom humidifier circuit board
US $0.01-10 / Piece
1 Piece (Min. Order)
Place of Origin: Hebei,China (Mainland)
Base Material: FR-4
Min. Hole Size: 0.2 mm
Min. Line Spacing: 0.1um(3mil)
Copper Thickness: 1oz
Product name: Double side SMT PCB custom humidifier custom humidifier circuit board
Double side SMT PCB custom humidifier circuit board 6 Photos
Shijiazhuang Ourpcb Tech. Ltd.
China (Mainland) Trade Assurance
Transaction Level:
1 Transaction(6 months)
70+
Response Rate
100.0%
Add to Compare Similar Products
Contact Supplier Chat Now!
High Precision Electronic Humidifier PCB manufacturer in shenzhen
US $0-10 / Piece
0 Pieces (Min. Order)
Base Material: FR4
Surface Finishing: HASL/Lead Free HASL/OSP/Gold Plating/Immersion Gold/ENIG
Min. Hole Size: 0.25mm
Min. Line Width: 0.1mm
Board Thickness: 1.6mm
Product name: PCB
High Precision Electronic Humidifier PCB manufacturer in shenzhen 6 Photos
Wells Electronic Technology Ltd.
China (Mainland) Trade Assurance
Transaction Level:
4 Transactions(6 months)
1,000+
Response Rate
57.1%
Add to Compare Similar Products
Contact Supplier Chat Now!
pcb factory customized humidifier control pcba
US $0.1 / Piece
1 Piece (Min. Order)
Place of Origin: Guangdong,China (Mainland)
Brand Name: OEM ODM
Model Number: UC
Base Material: FR-4
Min. Hole Size: 3mil (0.075mm)
Min. Line Width: 0.075mm/0.075mm(3mil/3mil)
pcb factory customized humidifier control pcba 6 Photos
Shenzhen UC Industrial Limited
China (Mainland) Trade Assurance
Transaction Level:
7 Transactions(6 months)
4,000+
Response Rate
70.0%
Add to Compare Similar Products
Contact Supplier I'm Away
best price 2 layer printed circuit boards maker humidifier pcb
US $1-10 / Piece
1 Piece (Min. Order)
Model Number: PCB assembly manufacturer
Surface Finishing: HASL/ ENIG /OSP,ENIG HASL OSP
Min. Hole Size: 0.2mm(8mil)
Min. Line Width: 0.1mm(4mil)
Min. Line Spacing: 0.1mm(4mil)
Type: best price 2 layer printed circuit boards maker humidifier pcb
best price 2 layer printed circuit boards maker humidifier pcb 3 Photos
BLD Electronic Co., Ltd.
China (Mainland) Trade Assurance
Transaction Level:
6 Transactions(6 months)
70,000+
Response Rate
90.5%
Add to Compare Similar Products
Contact Supplier Chat Now!
handheld humidifier pcb circuit board assembly fabrication
US $0.5-1.5 / Piece
1 Piece (Min. Order)
Model Number: WDF PCBA
Base Material: CEM-1, CEM-3,FR1, 22F, FR4, High TG, Aluminum, Ceramic, Rogers
Surface Finishing: Immersion Gold/Silver/Tin, Gold Planting, HASL Lead Free, OSP
Min. Hole Size: 0.10mm
Min. Line Width: 0.075mm
Board Thickness: 0.2mm - 4.0mm
handheld humidifier pcb circuit board assembly fabrication 4 Photos
Shenzhen Wonderful Technology Co., Ltd.
China (Mainland) Trade Assurance
Transaction Level:
4 Transactions(6 months)
Of course, a lot of things are harmful when used improperly. The biggest concern with humidifiers may be operator error—or the fact that most of us don’t keep our machines clean. A past report from the Environmental Protection Agency recommends washing out your humidifier every third day, but Nolen says even that guidance may be too relaxed. “I’d say at least every three days, and every day would be better,” she says.
She recommends using plain dish soap and warm water, taking care to scrub the sides of your water reservoir to remove any deposits. “Be careful about cleaning agents,” she adds. In 2011, there was an outbreak of lung infection among patients at a Korean hospital. An investigation concluded that “humidifier disinfectants” were to blame. While the types of disinfectants linked to that hospital outbreak aren't likely to turn up in your home, Nolen says you don't want to use harsh chemicals. Again, plain dish soap, hot water, and elbow grease are your best cleaning tools.

Physicians and other experts often recommend humidity control to prevent the damaging effects of dry air caused by low relative humidity.

There’s more than one type of humidifier, but at the most basic level, the device emits water vapor into a space to increase the level of humidity. When used correctly, humidifiers can help to alleviate dry skin, chapped lips, nose bleeds and other pesky cold-weather conditions. It can even help to reduce some snoring!

Are there any downsides to humidifiers?

The Insider Picks team writes about stuff we think you'll like. Business Insider has affiliate partnerships, so we may get a share of the revenue from your purchase.

One of the tough things about not properly cleaning your humidifier is that you're potentially doing more harm than good by shooting bacteria out into the air. If that's your concern, you'll rest easier with the Honeywell Germ-Free Humidifier.

The main draw is its UV technology that claims to destroy up to 99.9% of bacteria, mold, and fungus that could be lurking in the water. It's easy to clean, too, since all parts are dishwasher safe, and the tank's design allows you to reach in and scrub out.

One con is that the Honeywell has a filter that needs replacing very few months, and they cost about $11 each. However, some might say that's easier and not much more expensive than having to buy white vinegar for regular weekly cleaning as is recommended for other humidifiers.

Honeywell Germ Free Cool Mist Humidifier, HCM-350, $69.99, available at Amazon.

Top of the line

Amazon
This one comes in at a higher price point, but you'll get some pretty cool features for the extra expense. For starters, there's a built-in sensor that figures out how much humidity is in the room, and then automatically adjusts based on the setting you specify. When the humidity goes above that level, the Seneo will stop running. The unit also swings 45 degrees each way so that the mist is distributed across the room.

As for aesthetics, the color-changing night light (seven colors in all), creates a cool lava lamp-like vibe. You can choose one color, or let it rotate automatically.

Seneo 3.0L Ultrasonic Cool Mist Humidifiers with Sensor Control, Auto Swing, $69.99, at Amazon.
Add to Compare Similar Products
Contact Supplier Chat Now!
Customized FR4 humidifier PCB assembly board for solar garden light
US $1-10 / Piece
1 Piece (Min. Order)
Place of Origin: Guangdong,China (Mainland)
Base Material: FR-4
Min. Line Spacing: 0.003"
Copper Thickness: 1oz
Type: Solar garden light
Application: Solar garden light
Customized FR4 humidifier PCB assembly board for solar garden light 6 Photos
Shenzhen Unionway Technology Co., Ltd.
China (Mainland) Trade Assurance
Transaction Level:
Response Rate
64.3%
Add to Compare Similar Products
Contact Supplier Chat Now!
China Best humidifier pcb circuit board
US $1-12.99 / Piece
10 Pieces (Min. Order)
Min. Hole Size: 0.004"
Copper Thickness: 1oz
Min. Line Width: 0.075/3mil
Surface Finishing: HASL
Place of Origin: Guangdong,China (Mainland)
Base Material: FR-4
China Best humidifier pcb circuit board 6 Photos
Shenzhen Ciree Technology Ltd.
China (Mainland) Trade Assurance
Transaction Level:
4 Transactions(6 months)
900+
Response Rate
73.1%
Add to Compare Similar Products
Contact Supplier Chat Now!
smt humidifier pcba
US $0.1 / Piece
1 Piece (Min. Order)
Place of Origin: Guangdong,China (Mainland)
Base Material: FR-4,FR4,H-TG,Teflon,Rogers,Ceramics,Aluminium, Copper base
Surface Finishing: HASL,HAL, ENIG, ImAg, Imsn OSP, Plating AG, Plating gold
Min. Hole Size: 0.20mm
Min. Line Spacing: 3 Mil (0.075 Mm)
Copper Thickness: 0.5-3OZ
smt humidifier pcba
Shenzhen Tianweisheng Electronic Co., Ltd.
China (Mainland)
Transaction Level:
Response Rate
88.9%
Add to Compare Similar Products
Contact Supplier Chat Now!
Computer pcb mouse pcb and Humidifier PCB PCBA with blue ceramic capacitor
US $5-100 / Piece
1 Piece (Min. Order)
Place of Origin: Guangdong,China (Mainland)
Model Number: PCBA
Base Material: FR4
Min. Hole Size: 3mil (0.075mm)
Min. Line Spacing: 3 Mil (0.075 Mm)
Board Thickness: 1.6mm
Computer pcb mouse pcb and Humidifier PCB PCBA with blue ceramic capacitor 6 Photos
Shenzhen Kingle Technology Co., Ltd.
China (Mainland) Trade Assurance
Transaction Level:
6 Transactions(6 months)
10,000+
Response Rate
68.2%
Add to Compare Similar Products
Contact Supplier Chat Now!
8 layers humidifier home appliance controller pcb circuit board manufacturer
US $0.1-10 / Piece
1 Piece (Min. Order)
Copper Thickness: 1oz
Min. Line Width: 0.15mm
Surface Finishing: white,black,ect
Brand Name: xjypcb
Model Number: xjypcb
Board Thickness: 1.6mm,0.4/0.6/0.8/1.0/1.2/1.6/2.0/2.4/3.0mm
8 layers humidifier home appliance controller pcb circuit board manufacturer
Shenzhen Xinjiaye Electronics Technology Co., Ltd.
China (Mainland)
Transaction Level:
Response Rate
61.8%
Add to Compare Similar Products
Contact Supplier Chat Now!
Humidifier Controller/PCB design
US $1-100 / Piece
10 Pieces (Min. Order)
Min. Hole Size: 0.3mm
Number of Layers: 1-12 LAYERS
Surface Finishing: HASL, Flash gold, Immersion gold, Gold finger, Carbon ink
Base Material: FR1, FR2, CEM1, CEM3, FR4, BT
Brand Name: DK
Model Number: DK
Humidifier Controller/PCB design
Global Design Tech Electronics Co., Ltd. (Wuxi, Jiangsu, China)
China (Mainland)
Response Rate
0.0%
Add to Compare Similar Products
Contact Supplier Leave Messages
quick turn 94v0-led hasl 94v-0 high quality humidifier pcb
US $0.1-10 / Piece
10 Pieces (Min. Order)
Min. Line Spacing: 0.2mm pcb
Number of Layers: 1-12layer
Surface Finishing: Immersion Gold,hasl,osp,ENIG
Place of Origin: Zhejiang,China (Mainland)
Base Material: Aluminum Base,fr-4,fr-1,cem-1,cem-3
Brand Name: ctpcb
quick turn 94v0-led hasl 94v-0 high quality humidifier pcb 6 Photos
Quzhou Chuante Electronic Technology Co., Ltd.
China (Mainland) Trade Assurance
Transaction Level:
8 Transactions(6 months)
30,000+
Response Rate
35.0%
Add to Compare Similar Products
Contact Supplier Chat Now!
Controller pcb assembly pcba boards for humidifier
Supplier Details
Inquire Now Add this product to Inquiry Basket
Smart Electronics Custom-made OEM/ODM PCB/PCBA, cell phon...
China Smart Electronics Custom-made OEM/ODM PCB/PCBA, cell phone/elextronic pcb Manufacturer
6
US$ 0.33 - 0.56 / Piece
1 Piece (Min. Order)
Supplier Details
Inquire Now Add this product to Inquiry Basket
OEM Custom PCB and PCBA, in China Rigid PCB Manufacturer
China OEM Custom PCB and PCBA, in China Rigid PCB Manufacturer
8
US$ 65 / Square Meter
1 Square Meter (Min. Order)
Freight Cost Available
Supplier Details
Inquire Now Add this product to Inquiry Basket
Professional pcb pcba manufacturer
China Professional pcb pcba manufacturer
7
US$ 1.6 / Unit
5 Units (Min. Order)
Freight Cost Available
Supplier Details
Inquire Now Add this product to Inquiry Basket
Wholesale OEM PCBA Supplier for GPS Tracker with Case Ass...
China Wholesale OEM PCBA Supplier for GPS Tracker with Case Assembly
1
US$ 12.5 - 12.8 / Piece
5 Pieces (Min. Order)
Freight Cost Available
Supplier Details
Inquire Now Add this product to Inquiry Basket
PCBA for Industry Control Board with fully automatic faci...
China PCBA for Industry Control Board with fully automatic facilities and ISO 9001 certified
2
US$ 1 - 100 / Unit
100 Units (Min. Order)
Supplier Details
Inquire Now Add this product to Inquiry Basket
Good price custom circuit board PCBA 8v power supply PCB
China Good price custom circuit board PCBA 8v power supply PCB
4
US$ 0.02 / Piece
100 Pieces (Min. Order)
Freight Cost Available
Supplier Details
Inquire Now Add this product to Inquiry Basket
FR4 94V0 PCB and PCBA with 1.6mm Board Thickness
China FR4 94V0 PCB and PCBA with 1.6mm Board Thickness
1
US$ 0.01 - 0.5 / Piece
1 Piece (Min. Order)
Supplier Details
Inquire Now Add this product to Inquiry Basket
Wholesale PCB Circuits Board Hot Sell FR4 PCBA with Facto...
China Wholesale PCB Circuits Board Hot Sell FR4 PCBA with Factory Price
5
US$ 0.01 - 0.05 / Piece
1 Piece (Min. Order)
Supplier Details
Inquire Now Add this product to Inquiry Basket
Energy meter PCBA, UL and SGS certified, RoHS Directive-c...
China Energy meter PCBA, UL and SGS certified, RoHS Directive-compliant
5
US$ 3.3 - 4.1 / Set
1000 Sets (Min. Order)
Supplier Details
Inquire Now Add this product to Inquiry Basket
PCBA
China PCBA
3
US$ 1 - 1.5 / Piece
1 Piece (Min. Order)
Supplier Details
Inquire Now Add this product to Inquiry Basket
FR-4 Circuits Electronics Custom-made Multilayer OEM/ODM ... New
China FR-4 Circuits Electronics Custom-made Multilayer OEM/ODM PCB/PCBA
4
US$ 0.1 / Set
1 Set (Min. Order)
Freight Cost Available
Supplier Details
Inquire Now Add this product to Inquiry Basket
Multilayer PCBA with HASL for controller
China Multilayer PCBA with HASL for controller
8
US$ 0.1 - 5 / Piece
1 Piece (Min. Order)
Freight Cost Available
Supplier Details
Inquire Now Add this product to Inquiry Basket
Aluminum PCB Assemblies with 2.0mm Finishing Thickness
China Aluminum PCB Assemblies with 2.0mm Finishing Thickness
8
US$ 0.3 / Piece
1 Piece (Min. Order)
Freight Cost Available
Supplier Details
Inquire Now Add this product to Inquiry Basket
OEM/ODM Service PCBA, High-precision/E-testing Includes I...
China OEM/ODM Service PCBA, High-precision/E-testing Includes ICT in Line, Function Test
8
US$ 1 / Piece
100 Pieces (Min. Order)
Supplier Details
Inquire Now Add this product to Inquiry Basket
OEM PCBA, providing customized services and low volume or...
China OEM PCBA, providing customized services and low volume orders are welcome
1
US$ 0.1 / Piece
1 Piece (Min. Order)
Supplier Details
Inquire Now Add this product to Inquiry Basket
PCBA
China PCBA
1
US$ 1 - 2 / Piece
500 Pieces (Min. Order)
Supplier Details
Inquire Now Add this product to Inquiry Basket
LED PCBA
China LED PCBA
7
US$ 1 - 2 / Piece
5 Pieces (Min. Order)
Supplier Details
Inquire Now Add this product to Inquiry Basket
Anisotropic Conductive Adhesive PCB Assemblies
China Anisotropic Conductive Adhesive PCB Assemblies
2
US$ 2.7 - 3.3 / Piece
500 Pieces (Min. Order)
Freight Cost Available
Supplier Details
Inquire Now Add this product to Inquiry Basket
Flexible printed circuit board assembly for Pioneer Car D...
China Flexible printed circuit board assembly for Pioneer Car DVD
6
US$ 2.5 / Piece
100 Pieces (Min. Order)
Freight Cost Available
Supplier Details
Inquire Now Add this product to Inquiry Basket
Customized PCBA and OEM service, PCB assembly
China Customized PCBA and OEM service, PCB assembly
2
US$ 1.5 - 6 / Piece
10 Pieces (Min. Order)
Freight Cost Available
Supplier Details
Inquire Now Add this product to Inquiry Basket
High frequency HASL scooters electric amplifier circuit P...
China High frequency HASL scooters electric amplifier circuit PCB assembly
8
US$ 2 - 5 / Piece
500 Pieces (Min. Order)
Supplier Details
Inquire Now Add this product to Inquiry Basket
PCB Assembly in Green, High Precision, BGA and Lead-free
China PCB Assembly in Green, High Precision, BGA and Lead-free
1
20000 Pieces (Min. Order)
Supplier Details
Inquire Now Add this product to Inquiry Basket
Custom-made PCB Layout and Assembly for Motherboard
Taiwan Custom-made PCB Layout and Assembly for Motherboard
1
Supplier Details
Inquire Now Add this product to Inquiry Basket
PCB Assembly, FR4 Base
Hong Kong SAR PCB Assembly, FR4 Base
1
Supplier Details
Inquire Now Add this product to Inquiry Basket
PCB Assembly with Customers Providing Components
China PCB Assembly with Customers Providing Components
2
US$ 0.01 - 10 / Piece
1 Piece (Min. Order)
Supplier Details
Inquire Now Add this product to Inquiry Basket
2-layer Flexible PCB Assembly
Taiwan 2-layer Flexible PCB Assembly
1
US$ 150 / Piece
10 Pieces (Min. Order)
Supplier Details
Inquire Now Add this product to Inquiry Basket
PCB assembly/printing
China PCB assembly/printing
1
1 Piece (Min. Order)
Supplier Details
Inquire Now Add this product to Inquiry Basket
Turnkey Solution PCB Assembly Provider, RoHS Compliant
China Turnkey Solution PCB Assembly Provider, RoHS Compliant
1
US$ 1 / Piece
1 Piece (Min. Order)
Freight Cost Available
Supplier Details
Inquire Now Add this product to Inquiry Basket
Aluminum LED PCB Assembly
China Aluminum LED PCB Assembly
1
US$ 0.01 - 10 / Piece
1 Piece (Min. Order)
Supplier Details
Inquire Now Add this product to Inquiry Basket
Contract Manufacturing Service and PCB Assembly
China Contract Manufacturing Service and PCB Assembly
1
US$ 1 / Piece
1 Piece (Min. Order)
Supplier Details
Inquire Now Add this product to Inquiry Basket
LED production PCB fabrication and assembly
China LED production PCB fabrication and assembly
8
US$ 0.8 - 1 / Piece
1 Piece (Min. Order)
Freight Cost Available
Supplier Details
Inquire Now Add this product to Inquiry Basket
PCB & PCBA OEM Manufacturer Electronic Circuit Board, PCB...
China PCB & PCBA OEM Manufacturer Electronic Circuit Board, PCB Assembly
PCB and Electronic Assembly Manufacturing
China PCB and Electronic Assembly Manufacturing
1
US$ 1.45 - 2.47 / Piece
100 Pieces (Min. Order)
Freight Cost Available
Supplier Details
Inquire Now Add this product to Inquiry Basket
PCB and PCBA Prototype Manufacturing for Electronic Produ...
China PCB and PCBA Prototype Manufacturing for Electronic Products
The most common complaint from Amazon reviews is mold growing on the filter, but this is a problem with evaporative wicks in general and is not unique to the HCM-350. Following the manufacturer’s cleaning guidelines will help eliminate this problem; alternating between two filters every other day, and letting them dry completely between uses, is another safeguard.

This model also has no humidistat, but as we previously covered, this isn’t a big concern for evaporative models because they are physically incapable of overhumidifying. Besides, out of the models we tested that did have humidistats, only half of them were accurate, so it’s not a terribly reliable feature anyway.

Finally, there’s the matter of the germ-killing UV bulb, which you’ll note we’ve hardly mentioned, despite it being prominently featured in this model’s marketing materials. Honeywell refers to an “independent report” that tested UV light as being 99.9 percent effective in killing E. coli and other germs after two hours of exposure. Given the slow rate at which water flows through this machine, it’s certainly possible that the bulb is effective at reducing the amount of funk that reaches the filter. Yet, at the same time, it’s not clear that the UV lamp is really effective or well-positioned. It only illuminates a small portion of the water as it flows from the tank over to the filter wick. Overall, we don’t think the UV germ-killing abilities are really a selling point for this humidifier.

We don’t think the UV germ-killing abilities are really a selling point for this humidifier.
That being said, some customer reviewers are extremely upset by the fact that replacement bulbs are expensive and must be obtained directly from the manufacturer. We are sympathetic to their indignation. However, considering that the feature is of dubious efficacy in the first place, we think it’s better to just pretend that it doesn’t have this feature at all. An indicator light changes from green to red when it’s time to replace the UV lamp. But frankly, we wouldn’t bother replacing it after the first one burns out after about 3,000 hours, or about four months of daily, around-the-clock use.

This article was originally published on 6/16/2016.

Disclosure: This post is brought to you by Business Insider's Insider Picks team. We aim to highlight products and services you might find interesting, and if you buy them, we get a small share of the revenue from the sale from our commerce partners, including Amazon. Jeff Bezos, CEO of Amazon, is an investor in Business Insider through his personal investment company Bezos Expeditions. We frequently receive products free of charge from manufacturers to test. This does not drive our decision as to whether or not a product is featured or recommended. We operate independently from our advertising sales team. We welcome your feedback. Have something you think we should know about? Email us at insiderpicks@businessinsider.com.

Read the original article on Insider Picks. Copyright 2017. Follow Insider Picks on Twitter.

Amazon

Dry air is the cause of so many problems, from stuffy noses and sore throats, to dry skin and cracked lips. Investing in a humidifier can help put more moisture into the air to relieve these symptoms, and more.

Choosing the best humidifier for your needs is important since they do require a moderate amount of upkeep.
Supplier Details
Inquire Now Add this product to Inquiry Basket
PCB Board Assembly/PCBA for Customized Smart Air Purifier...
China PCB Board Assembly/PCBA for Customized Smart Air Purifiers and Humidifiers
7
US$ 0.1 - 1 / Piece
1 Piece (Min. Order)
Freight Cost Available
Supplier Details
Inquire Now Add this product to Inquiry Basket
FR4 PCB Board for Electronic Manufacturing Services (EMS)...
China FR4 PCB Board for Electronic Manufacturing Services (EMS) PCBA
3
US$ 0.1 - 10 / Piece
1 Piece (Min. Order)
Supplier Details
Inquire Now Add this product to Inquiry Basket
Quadcopter PCBA Electronic Manufacturing Service
China Quadcopter PCBA Electronic Manufacturing Service
1
US$ 1 - 10 / Piece
1 Piece (Min. Order)
Supplier Details
Inquire Now Add this product to Inquiry Basket
PCB, PCBA service, one stop electronic manufacturing serv...
China PCB, PCBA service, one stop electronic manufacturing service
8
US$ 1 / Piece
1 Piece (Min. Order)
Freight Cost Available
Supplier Details
Inquire Now Add this product to Inquiry Basket
Audio system, CCTV, electronic PCB manufacturing and asse...
China Audio system, CCTV, electronic PCB manufacturing and assembly
8
US$ 18.6 - 22.3 / Piece
1 Piece (Min. Order)
Freight Cost Available
Supplier Details
Inquire Now Add this product to Inquiry Basket
PCBA one stop electronic manufacturing service, SMT DIP w...
China PCBA one stop electronic manufacturing service, SMT DIP workshop
8
US$ 2.8 / Piece
5 Pieces (Min. Order)
Supplier Details
Inquire Now Add this product to Inquiry Basket
Electronic contract manufacturing antminer l3 mother boar...
China Electronic contract manufacturing antminer l3 mother board pcba assembly
5
US$ 0.1 - 5 / Piece
1 Piece (Min. Order)
Freight Cost Available
Supplier Details
Inquire Now Add this product to Inquiry Basket
Electronic manufacturing service with designing service
China Electronic manufacturing service with designing service
8
US$ 10 - 10.5 / Piece
1 Piece (Min. Order)
Freight Cost Available
Supplier Details
Inquire Now Add this product to Inquiry Basket
Electronic Manufacturing for Traffic and Industrial and M...
China Electronic Manufacturing for Traffic and Industrial and More Systems
1
100 Pieces (Min. Order)
Supplier Details
Inquire Now Add this product to Inquiry Basket
Electronic PCBA assembly turn-key services
China Electronic PCBA assembly turn-key services
2
US$ 1 / Piece
1 Piece (Min. Order)
Freight Cost Available
Supplier Details
Inquire Now Add this product to Inquiry Basket
PCBA assembly, SMT assembly, provides electronic componen...
China PCBA assembly, SMT assembly, provides electronic components procurement service
1
US$ 30 - 60 / Piece
1 Piece (Min. Order)
Supplier Details
Inquire Now Add this product to Inquiry Basket
PCB board assembly for electronic products
China PCB board assembly for electronic products
1
US$ 1 - 200 / Piece
100 Pieces (Min. Order)
Supplier Details
Inquire Now Add this product to Inquiry Basket
10+ years experience PCB assembly for much electronic pro... New
China 10+ years experience PCB assembly for much electronic products
5
US$ 0.1 - 0.9 / Piece
1 Piece (Min. Order)
Supplier Details
Inquire Now Add this product to Inquiry Basket
Turnkey/Prototype Service PCB Assembly with Six Convey Li...
China Turnkey/Prototype Service PCB Assembly with Six Convey Lines, RoHS Compliance, for Electronic Part
1
US$ 1 - 10 / Unit
1000 Units (Min. Order)
Supplier Details
Inquire Now Add this product to Inquiry Basket
PCB Assembly, Provides Electronic Components Procurement ...
China PCB Assembly, Provides Electronic Components Procurement Service for Passive and Active Component
1
US$ 1 / Piece
1 Piece (Min. Order)
Supplier Details
Inquire Now Add this product to Inquiry Basket
Professtional Printed Circuit Board Assembly, Electronic ...
China Professtional Printed Circuit Board Assembly, Electronic PCB Assembly Service, PCBA, PCB Manufacture
1
US$ 1.22 - 1.28 / Piece
1 Piece (Min. Order)
Freight Cost Available
Supplier Details
Inquire Now Add this product to Inquiry Basket
PCB PCBA design provider PCB assembly custom circuit boar...
China PCB PCBA design provider PCB assembly custom circuit board assembly
1
US$ 1 / Piece
1 Piece (Min. Order)
Supplier Details
Inquire Now Add this product to Inquiry Basket
PCB PCBA design provider PCB assembly custom circuit boar...
China PCB PCBA design provider PCB assembly custom circuit board assembly
1
US$ 1 / Piece
1 Piece (Min. Order)
Supplier Details
Inquire Now Add this product to Inquiry Basket
PCB PCBA design provider PCB assembly custom circuit boar...
China PCB PCBA design provider PCB assembly custom circuit board assembly
1
US$ 1 / Piece
1 Piece (Min. Order)
Supplier Details
Inquire Now Add this product to Inquiry Basket
PCB PCBA design provider PCB assembly custom circuit boar...
China PCB PCBA design provider PCB assembly custom circuit board assembly
1
US$ 1 / Piece
1 Piece (Min. Order)
Supplier Details
Inquire Now Add this product to Inquiry Basket
PCB & PCBA OEM Manufacturer, Electronic Circuit Board PCB... New
China PCB & PCBA OEM Manufacturer, Electronic Circuit Board PCB assemblies PCBA Factory New
5
US$ 80 / Piece
20 Pieces (Min. Order)
Supplier Details
Inquire Now Add this product to Inquiry Basket
Professional PCBA OEM/ODM PCBA manufacturing, computer ma...
China Professional PCBA OEM/ODM PCBA manufacturing, computer main board, Android laptop main boards
8
US$ 1 / Piece
1 Piece (Min. Order)
Freight Cost Available
Supplier Details
Inquire Now Add this product to Inquiry Basket
Professional OEM/ODM PCBA/PCB, PCBA Manufacturing PCBA As...
China Professional OEM/ODM PCBA/PCB, PCBA Manufacturing PCBA Assembly
1
US$ 2.1 - 2.3 / Piece
1 Piece (Min. Order)
Supplier Details
Inquire Now Add this product to Inquiry Basket
2 Layer Electronic Board Rigid PCB, Manufacturing Custom-... New
China 2 Layer Electronic Board Rigid PCB, Manufacturing Custom-made PCBA
8
US$ 65 / Square Meter
1 Square Meter (Min. Order)
Freight Cost Available
Supplier Details
Inquire Now Add this product to Inquiry Basket
PCB Assembly and Turnkey Manufacturing Service with RoHS ...
Hong Kong SAR PCB Assembly and Turnkey Manufacturing Service with RoHS Directive-compliant for Electronic Products
1
Supplier Details
Inquire Now Add this product to Inquiry Basket
Electronic circuit board, PCBA manufacturing
China Electronic circuit board, PCBA manufacturing
3
US$ 1.6 - 1.8 / Piece
1 Piece (Min. Order)
Freight Cost Available
Supplier Details
Inquire Now Add this product to Inquiry Basket
PCB & PCBA OEM Manufacturer Electronic Circuit Board Elec...
China PCB & PCBA OEM Manufacturer Electronic Circuit Board Electronic PCBA Manufacturer
1
US$ 1.5 - 2 / Piece
1 Piece (Min. Order)
Supplier Details
Inquire Now Add this product to Inquiry Basket
Electronic PCB manufacturing PCBA
China Electronic PCB manufacturing PCBA
1
US$ 0.1 / Piece
500 Pieces (Min. Order)
Supplier Details
Inquire Now Add this product to Inquiry Basket
Electronic Board Assembly, FR4 PCB and PCBA Manufacturing New
China Electronic Board Assembly, FR4 PCB and PCBA Manufacturing
5
US$ 1 / Piece
1 Piece (Min. Order)
Supplier Details
Inquire Now Add this product to Inquiry Basket
Custom Electronic PCB Manufacturing Power Board 14.8V Rec...
China Custom Electronic PCB Manufacturing Power Board 14.8V Rechargeable Battery PCM
4
US$ 4.99 - 5.23 / Piece
10 Pieces (Min. Order)
Freight Cost Available
Supplier Details
Inquire Now Add this product to Inquiry Basket
PCB Manufacturing Service with Turnkey Contract for Elect...
China PCB Manufacturing Service with Turnkey Contract for Electronic Product Control Unit
5
1 Piece (Min. Order)
Supplier Details
Inquire Now Add this product to Inquiry Basket
Mini electronic PCB assembly with 0201 components, EMS an...
China Mini electronic PCB assembly with 0201 components, EMS and turnkey service
3
US$ 5 - 10 / Piece
100 Pieces (Min. Order)
Freight Cost Available
Supplier Details
Inquire Now Add this product to Inquiry Basket
Electronic Products OEM Service PCB Assembly, Low Volume ...
China Electronic Products OEM Service PCB Assembly, Low Volume Services
4
US$ 80 / Piece
20 Pieces (Min. Order)
Supplier Details
Inquire Now Add this product to Inquiry Basket
Contract Manufacturing Services PCBA, One -stop EMS Servi...
China Contract Manufacturing Services PCBA, One -stop EMS Services Provider
8
US$ 0.65 - 36.9 / Piece
1 Piece (Min. Order)
Supplier Details
Inquire Now Add this product to Inquiry Basket
PCB Manufacturing & PCB Assembly Services for Counter
China PCB Manufacturing & PCB Assembly Services for Counter
8
US$ 0.1 - 5 / Piece
1 Piece (Min. Order)
Freight Cost Available
Supplier Details
Inquire Now Add this product to Inquiry Basket
PCB Manufacturing & PCB Assembly Services for UPS Power
China PCB Manufacturing & PCB Assembly Services for UPS Power
8
US$ 1 - 10 / Piece
1 Piece (Min. Order)
Freight Cost Available
Supplier Details
Inquire Now Add this product to Inquiry Basket
Low Cost PCBA for Electronic Power Bank, 100% E-test SMT/...
China Low Cost PCBA for Electronic Power Bank, 100% E-test SMT/DIP Manufacturer
2
US$ 1 / Piece
1 Piece (Min. Order)
Supplier Details
Inquire Now Add this product to Inquiry Basket
Custom-made Electronic Contract Manufacturing with PCBA a...
Taiwan Custom-made Electronic Contract Manufacturing with PCBA and PCB Layout for Motherboards
1
Supplier Details
Inquire Now Add this product to Inquiry Basket
PCBA Electronic Card Service Manufacturer form Shenzhen C...
China PCBA Electronic Card Service Manufacturer form Shenzhen China Supplier
The water you use to fill your tank could also cause issues. Both the CPSC and the EPA recommend filling your humidifier with distilled water—not tap—to keep potentially harmful microorganisms out of the air you breathe. But a study from the University of Colorado suggests that’s overkill. While the researchers found the water used to fill a humidifier does dictate its bacterial profile, few of the microorganisms they turned up could lead to health concerns. (Worth noting is that they were looking at humidifiers filled with Rocky Mountain water from their state’s Front Range, which has a reputation for being very clean. Their findings might not hold in other places.)

Assuming you’re good about cleaning your humidifier and filling it with distilled water, you also need to be careful about moisture around your machine. If your humidifier is cranked up so high that it’s surrounded by a scrim of wetness, that’s bad. “Moisture feeds a lot of things we don’t want in our homes, like mold and spores,” Nolen says. “You want to keep the humidity in your home at or below 50%.” (You can buy an indoor humidity monitor for about $10.) If you’re accustomed to running your humidifier at its most powerful, “I can see the mist!” setting, you may want to turn it down.

A similar evaporative option

Runner-up

Buy from Amazon
*At the time of publishing, the price was $63.

Similar, with some flaws
Sunpentown SU-9210 Digital Evaporative Humidifier
This costs a bit more than our pick and doesn’t have a one-piece reservoir, but it offers comparable performance should our pick go out of stock.
If the Honeywell is out of stock, the Sunpentown SU-9210 Digital Evaporative Humidifier is another evaporative humidifier we liked in testing. As an evaporative humidifier, the SU-9210 has all the same inherent benefits over ultrasonic models as the Honeywell: lack of white dust and puddling, and general inability to overhumidify. But it’s not nearly as easy to clean as our top pick, which ultimately makes it more difficult to live with.

Also great

Buy from Amazon
*At the time of publishing, the price was $65.

For larger rooms
Sunpentown SU-4010 Dual Mist Humidifier with ION Exchange Filter
Ultrasonic humidifiers are silent and humidify at a faster rate than our pick but can overhumidify if you’re not careful. This one performs similarly to models that cost twice as much and is good for a space 400 square feet or larger.
For spaces around 400 square feet or larger, consider the Sunpentown SU-4010 Dual Mist Humidifier with ION Exchange Filter. It’s ultrasonic, which means it’s more powerful than our evaporative picks, but this model (like any humidifier of its type) can spread an annoying layer of mineral dust, and can overhumidify a room. This model stands apart with a level of power that matches the leaders in its category and a price that’s roughly half of some competitors. It doesn’t have a humidistat, but in our testing, they usually aren’t that accurate. The SU-4010 is also harder to clean than the evaporative picks because the water tray is full of sharp angles—a shared trait among all the ultrasonic humidifiers we considered

Dry Air Can Damage Your Family’s Health and Home
Supplier Details
Inquire Now Add this product to Inquiry Basket
Manufacture electronic PCBA assembly, PCB PCBA factory
China Manufacture electronic PCBA assembly, PCB PCBA factory
1
US$ 1 - 500 / Piece
1 Piece (Min. Order)
Supplier Details
Inquire Now Add this product to Inquiry Basket
Manufacture electronic PCBA assembly, PCB PCBA factory
China Manufacture electronic PCBA assembly, PCB PCBA factory
4
US$ 1 - 500 / Piece
1 Piece (Min. Order)
Supplier Details
Inquire Now Add this product to Inquiry Basket
OEM/ODM electronic pcba services for monititor in Shenzhe...
China OEM/ODM electronic pcba services for monititor in Shenzhen China
8
US$ 0.1 - 50 / Piece
1 Piece (Min. Order)
Freight Cost Available
Supplier Details
Inquire Now Add this product to Inquiry Basket
OEM PCBA Assembling Electronic Manufacturing Maker
China OEM PCBA Assembling Electronic Manufacturing Maker
7
US$ 0.1 / Piece
1 Piece (Min. Order)
Supplier Details
Inquire Now Add this product to Inquiry Basket
PCBA EMS Electronic Manufacturing Service
China PCBA EMS Electronic Manufacturing Service
1
US$ 1 - 10 / Piece
1 Piece (Min. Order)
Supplier Details
Inquire Now Add this product to Inquiry Basket
Multilayer PCBA Electronic Manufacturing Service
China Multilayer PCBA Electronic Manufacturing Service
2
US$ 1 - 10 / Piece
1 Piece (Min. Order)
Supplier Details
Inquire Now Add this product to Inquiry Basket
Electronic manufacturing service PCB assembly, component ...
China Electronic manufacturing service PCB assembly, component procurement
1
US$ 0.5 - 5 / Set
1 Set (Min. Order)
Supplier Details
Inquire Now Add this product to Inquiry Basket
PCBA electronic manufacturing
China PCBA electronic manufacturing
5
US$ 0.1 / Piece
1 Piece (Min. Order)
Freight Cost Available
Supplier Details
Inquire Now Add this product to Inquiry Basket
PCB Electronic Manufacturing Services
China PCB Electronic Manufacturing Services
4
US$ 5.6 - 7.7 / Piece
100 Pieces (Min. Order)
Freight Cost Available
Supplier Details
Inquire Now Add this product to Inquiry Basket
PCB & PCBA OEM Manufacturer Electronic Circuit Board
China PCB & PCBA OEM Manufacturer Electronic Circuit Board
3
US$ 80 / Piece
20 Pieces (Min. Order)
Supplier Details
Inquire Now Add this product to Inquiry Basket
Manufacture OEM Electronic Circuit board & aluminum PCB
Freight Cost Available
Supplier Details
Inquire Now Add this product to Inquiry Basket
PCBA Board PCB Assemblies One Step Contract Service PCB A... New
China PCBA Board PCB Assemblies One Step Contract Service PCB Assembly
8
US$ 1 - 2 / Unit
1 Unit (Min. Order)
Freight Cost Available
Supplier Details
Inquire Now Add this product to Inquiry Basket
Double Access Flexible PCBs Design Polyimide PCBs PCB Ass... New
China Double Access Flexible PCBs Design Polyimide PCBs PCB Assembly Flex PCBs Components FPC
6
US$ 1.54 / Piece
1 Piece (Min. Order)
Freight Cost Available
Supplier Details
Inquire Now Add this product to Inquiry Basket
Double-sided FR4 PCB and PCB assembly with immersion gold...
Hong Kong SAR Double-sided FR4 PCB and PCB assembly with immersion gold surface finish
2
10 Meters (Min. Order)
Supplier Details
Inquire Now Add this product to Inquiry Basket
Multiple Copper PCBs for SMT and A/I assembly projects ac...
Taiwan Multiple Copper PCBs for SMT and A/I assembly projects accepted
1
Supplier Details
Inquire Now Add this product to Inquiry Basket
16-layer PCB with Assembly, Used for Telecommunication Pr...
Hong Kong SAR 16-layer PCB with Assembly, Used for Telecommunication Product
1
Supplier Details
Inquire Now Add this product to Inquiry Basket
Rigid-flex PCB, Quick Turn Around, Gold Bonding, FPC Asse...
China Rigid-flex PCB, Quick Turn Around, Gold Bonding, FPC Assembly, for AI Product
8
US$ 0.32 - 0.5 / Piece
1 Piece (Min. Order)
Freight Cost Available
Supplier Details
Inquire Now Add this product to Inquiry Basket
Flexible Circuits with Assembly for LED Strip
China Flexible Circuits with Assembly for LED Strip
2
US$ 3 / Piece
5 Pieces (Min. Order)
Freight Cost Available
Supplier Details
Inquire Now Add this product to Inquiry Basket
PCB/PCBA/PCB Assembly, Customized Shenzhen PCBA
China PCB/PCBA/PCB Assembly, Customized Shenzhen PCBA
8
US$ 0.1 - 10 / Piece
1 Piece (Min. Order)
Supplier Details
Inquire Now Add this product to Inquiry Basket
Aluminum LED PCBA PCB Aseembly LED PCB Assembly
China Aluminum LED PCBA PCB Aseembly LED PCB Assembly
6
US$ 0.1 / Piece
1 Piece (Min. Order)
Supplier Details
Inquire Now Add this product to Inquiry Basket
Factory Price PCB/PCBA/PCB Assembly UL Approve
China Factory Price PCB/PCBA/PCB Assembly UL Approve
6
US$ 0.1 - 10 / Piece
1 Piece (Min. Order)
Supplier Details
Inquire Now Add this product to Inquiry Basket
FPC,Quadcopter Sensor, Yellow Mask+White pattern, ENIG + ...
China FPC,Quadcopter Sensor, Yellow Mask+White pattern, ENIG + Steel Plate, 0.5oz Copper
1
US$ 0.1 - 5 / Piece
1 Piece (Min. Order)
Supplier Details
Inquire Now Add this product to Inquiry Basket
Professional PCB/PCBA assembly manufacturer PCB prototype...
China Professional PCB/PCBA assembly manufacturer PCB prototype in Shenzhen
7
US$ 1 - 10 / Piece
1 Piece (Min. Order)
Freight Cost Available
Supplier Details
Inquire Now Add this product to Inquiry Basket
Double-sided PCB quick Lead time PCB PCBA assembly
China Double-sided PCB quick Lead time PCB PCBA assembly
6
US$ 1 - 10 / Piece
1 Piece (Min. Order)
Freight Cost Available
Supplier Details
Inquire Now Add this product to Inquiry Basket
Flexible PCB manufacturer PCB PCBA assembly in Shenzhen
China Flexible PCB manufacturer PCB PCBA assembly in Shenzhen
4
US$ 1 - 10 / Carton
1 Carton (Min. Order)
Freight Cost Available
Supplier Details
Inquire Now Add this product to Inquiry Basket
FR-4 PCB assembly PCB PCBA manufacturer in Shenzhen
China FR-4 PCB assembly PCB PCBA manufacturer in Shenzhen
3
US$ 1 - 10 / Carton
1 Carton (Min. Order)
Freight Cost Available
Supplier Details
Inquire Now Add this product to Inquiry Basket
Multilayer PCB and PCBA Assembly 35um Cu in PTH Original
China Multilayer PCB and PCBA Assembly 35um Cu in PTH Original
5
US$ 0.1 - 10 / Piece
1 Piece (Min. Order)
Supplier Details
Inquire Now Add this product to Inquiry Basket
Competitive PCB and PCBA Assembly, Manufacturer
China Competitive PCB and PCBA Assembly, Manufacturer
1
US$ 0.1 - 10 / Piece
1 Piece (Min. Order)
Supplier Details
Inquire Now Add this product to Inquiry Basket
Customized SMT OEM PCBA and PCBs Assembly
China Customized SMT OEM PCBA and PCBs Assembly
4
US$ 0.1 - 10 / Piece
1 Piece (Min. Order)
Supplier Details
Inquire Now Add this product to Inquiry Basket
FR4 PCB PCBA Assembly, PCBA Board, PCBA Manufacturer in C...
China FR4 PCB PCBA Assembly, PCBA Board, PCBA Manufacturer in China, OEM Factory with 1.6mm Board
1
US$ 2 / Piece
10 Pieces (Min. Order)
Supplier Details
Inquire Now Add this product to Inquiry Basket
multilayer PCB and PCBA assembly 35um Cu in PTH original ...
China multilayer PCB and PCBA assembly 35um Cu in PTH original factory manufacturing in Shenzhen
2
US$ 1.59 - 10 / Piece
1 Piece (Min. Order)
Supplier Details
Inquire Now Add this product to Inquiry Basket
Factory directly quick-turn around PCB, one stop customiz... New
China Factory directly quick-turn around PCB, one stop customized PCB PCBA assembly service for clients
Too much humidity can be as much of a problem as too little humidity. Unlike portable units, a whole-home humidifier continually monitors relative humidity levels and then delivers the perfect amount of moisture to the air throughout your entire home.

Aprilaire offers both evaporative and steam humidifiers that introduce humidity into your home's air in the form of water vapor, which prevents minerals from entering the air in your home and potentially into your lungs.

Maintenance of our humidifiers is easy and infrequent, requiring attention just once or twice a year. Compare that to portable humidifiers that require you to monitor levels in messy tanks.

Only Aprilaire Offers Fully Automatic Digital Humidifier Control

You may never have to monitor settings or wait until you feel uncomfortable with the Aprilaire Automatic Digital Humidifier Control.

Optimum levels of relative humidity in your home will fluctuate with the changes in outdoor temperature. And this set-it-and-forget-it control keeps your home’s humidity level exactly where you want it.

We took a look at a variety of humidifiers to compile a list of the top models you should consider, whether you plan to use it daily, to help you sleep, or to feel better during a bout of the flu or a cold.

Humidifiers do more good than bad, as long as you clean them properly. Without regular care, a dirty humidifier could promote bacteria and mold growth.

You also want to ensure that your humidifier does not make your home too humid. According to the Environmental Protection Agency, ideal indoor humidity levels can vary but “the ideal levels of humidity for your living space will be less than 60 [percent] in the summer and between 25 — 40 [percent] in the winter.” You can monitor the indoor humidity of your home by checking this website, and looking for an increase in condensation, mold or insects in your home.

How do I clean a humidifier?

From white vinegar and tea tree oil to using distilled water, there are many hacks to clean your humidifier. The important thing is that you do clean it — regularly.

What kind of humidifier do I need?

There are a few different types of humidifiers currently on the market that work best for certain homes or situations. From travel humidifiers to devices that target eczema and psoriasis, we’ve rounded up the best of the best.

Humidity is the amount of water vapor in the air. The amount of humidity varies depending on the season, weather and where you live. Generally, humidity levels are higher in the summer and lower during winter months. Ideally, humidity in your home should be between 30 and 50 percent. Humidity that's too low or too high can cause problems.

Low humidity can cause dry skin, irritate your nasal passages and throat, and make your eyes itchy.
High humidity can make your home feel stuffy and can cause condensation on walls, floors and other surfaces that triggers the growth of harmful bacteria, dust mites and molds. These allergens can cause respiratory problems and trigger allergy and asthma flare-ups.
How to measure humidity
Supplier Details
Inquire Now Add this product to Inquiry Basket
PCB PCBA Assembly with SMT DIP Service and Functional Tes...
China PCB PCBA Assembly with SMT DIP Service and Functional Testing
4
US$ 1 - 100 / Piece
100 Pieces (Min. Order)
Supplier Details
Inquire Now Add this product to Inquiry Basket
PCB PCBA Assembly with 2 Layers 1.6mm FR4 1/1OZ Immersion...
China PCB PCBA Assembly with 2 Layers 1.6mm FR4 1/1OZ Immersion Gold
4
US$ 1 - 100 / Piece
100 Pieces (Min. Order)
Supplier Details
Inquire Now Add this product to Inquiry Basket
PCBA PCB Assembly Manufacturer including Components Purch...
China PCBA PCB Assembly Manufacturer including Components Purchasing
4
US$ 1 - 100 / Piece
100 Pieces (Min. Order)
Supplier Details
Inquire Now Add this product to Inquiry Basket
Low Cost SMT PCB PCBA Assembly with Accessories Sourcing
China Low Cost SMT PCB PCBA Assembly with Accessories Sourcing
1
US$ 1 - 100 / Piece
100 Pieces (Min. Order)
Supplier Details
Inquire Now Add this product to Inquiry Basket
Multilayer PCB assembly manufacturer OEM PCBA New
China Multilayer PCB assembly manufacturer OEM PCBA
8
US$ 1 - 10 / Piece
1 Piece (Min. Order)
Freight Cost Available
Supplier Details
Inquire Now Add this product to Inquiry Basket
Multilayer PCB assembly manufacturer OEM PCBA New
China Multilayer PCB assembly manufacturer OEM PCBA
7
US$ 1 - 10 / Piece
1 Piece (Min. Order)
Freight Cost Available
Supplier Details
Inquire Now Add this product to Inquiry Basket
PCB Board PCBA Board Assembly Service
China PCB Board PCBA Board Assembly Service
1
US$ 1 - 100 / Piece
100 Pieces (Min. Order)
Supplier Details
Inquire Now Add this product to Inquiry Basket
Multilayer PCB assembly manufacturer OEM PCBA in Shenzhen New
China Multilayer PCB assembly manufacturer OEM PCBA in Shenzhen
8
US$ 1 - 10 / Piece
1 Piece (Min. Order)
Freight Cost Available
Supplier Details
Inquire Now Add this product to Inquiry Basket
Shenzhen PCBA Car Components PCB Assembly

Read the original article on Insider Picks. Copyright 2017. Follow Insider Picks on Twitter.

dry skin
sinus congestion/headache
dry throat
nose irritation
bloody noses
irritated vocal cords
dry cough
cracked lips
You may be prone to these discomforts when the air in your home is dry. This is especially common during winter months or when an air conditioner is being used during the summer.

Express PCB		Rigid PCB Rapid Prototype,24 hours
Fr4 PCB		prototype Lower to 15USD !
Rapid Prototype		Fr4 Rigid PCB Rapid Prototype China,

Turnkey Services		Turnkey PCB Assembly Services,
Turnkey services		Print circuit board Manufacturing, Turnkey Services
Turnkey Assembly		Through Hole PCB components wave soldering Assembly

humidifier PCB assembly electronic manufacturing

PCB Supplier Shenzhen, China, PCB Manufacturer, Turnkey services

Express PCB

Rigid PCB Rapid Prototype,24 hours

Turnkey Services

Turnkey PCB Assembly Services,

humidifier PCBA turnkey assembly Manufacturing