washing machine control board PCB assembly electronic manufacturing

washing machine control board PCBA turnkey assembly Manufacturing

washing machine control board PCBA turnkey assembly Manufacturing
Step 7: Install the new machine control board

Position the new machine control board in the mounting slots and slide it to the right to lock it in place. Replace the mounting screw.

Step 8: Connect the wires

Using your digital photograph or documentation as a guide, connect all the wires to the new machine control board.

Step 9: Reinstall the housing cover

Modern washing machines all contain a computerised timer and this is responsible for controlling all the different circuits in the machine, such as the drain circuit and the heating circuit.

If you suspect that there’s a fault in one of the circuits in your machine, it’s usually much easier to test all the components in the circuit then trying to prove that the problem lies in the control board.

The Kenmore Elite HE3 washers will stop their cycle and display an error code if they detect a problem. Two error codes seem prevalent, FDL and F11. FDL indicates a failure of the door lock mechanism. F11 indicates an error in communication with the control board manufacturing and the front panel. Clearing the error and restarting the cycle may fix the problem temporarily, but is not a permanent fix.

One condition known to cause the problem is that the door latch relay on the control board can become coated with carbon due to excessive arcing. This guide will explain how to access and clean or replace the relays.

For example, in the drain circuit, you would check the manufacturing drain pump and the wiring, while for the heating circuit you would check the element, the thermostat and the wiring.

If you then suspect that the problem still lies in the circuit board, unfortunately, it’s usually quite difficult to test the board and you’ll actually just need to replace it altogether.

In this video, we will go through manufacturing some of the various ways in which you can try to diagnose the problem you are experiencing with your washing machine.

Position the housing on the front of the machine control board. Snap it into place, making sure all the locking tabs are engaged.

Step 10: Reinstall the dispenser hoses

I located the control board tucked behind the rear panel:-

To test the element, first disconnect the lugs and then turn your meter onto a high resistance setting and measure from earth to one of the terminals – from this you shouldn’t get a reading.

Proceed to put your meter onto a low resistance setting and measure across the element. On this element there is a reading of about 27 to 28 ohms, so that indicates that this one is OK.

The access to the board is gained through a cover panel on the back of the washer. Pull it out from the wall (if you have not done so already) and locate the screws. On my LG there were seven, three across the top, three across the bottom, and one in the middle. Note the differences in screw sizes as they come out, and if you wish, mark them for where they go back. I had two different sizes. The cover then lifts away easily.

You may well be beginning to see why we don't like selling these parts.

When you get the new timer go wire for wire, spade connection by spade connection unless there has been any modification to the wiring or time. Normally any modification is included with the timer if there has been any as the goods must be fit for purpose, in other words it has to be a suitable replacement, that does not however mean that it has to be easy.

1 Piece (Min. Order)
Brand Name: OEM ODM
Base Material: FR-4 ,High Tg FR-4, High Frequency board(Rogers,Arlon, Taconic,Nelco)
Min. Line Width: 3mil(0.075)
Min. Line Spacing: 3mil(0.075mm)
Copper Thickness: 1oz
Board Thickness: 1.6mm
Control Board manufacturing Assembly and high quality washing machine control board pcba 3 Photos
Shenzhen Fumax Technology Co., Ltd.
China (Mainland) Trade Assurance
Transaction Level:
10 Transactions(6 months)
710,000+
Response Rate
65.6%
Add to Compare Sponsored Listing
Contact Supplier Leave Messages
94V0 ROHS Alu Immersion Gold/Silver/Tin OSP Finishing Washing Machine Control Board
US $0.1-10 / Piece
1 Piece (Min. Order)
Place of Origin: Zhejiang,China (Mainland)
Surface Finishing: HASL, Immersion Gold, OPS, etc
Min. Hole Size: 0.2mm
Min. Line Spacing: 0.1mm (4mil)
Copper Thickness: 0.5-4oz
Board Thickness: 0.5-3.2mm
94V0 ROHS Alu Immersion Gold/Silver/Tin OSP Finishing Washing Machine Control Board 6 Photos
Wenzhou Gefo Trading Co., Ltd.
China (Mainland)
Add to manufacturing Compare Sponsored Listing
Contact Supplier Chat Now!
Universal Washing Machine Control Board
US $1-100 / Piece
5 Pieces (Min. Order)
Place of Origin: Guangdong,China (Mainland)
Base Material: FR-4
Surface Finishing: Immersion Gold ( Lead Free)
Min. Hole Size: 0.10 mm
Min. Line Spacing: 3mil (0.075mm)
Board Thickness: 1.0mm
Universal Washing Machine Control Board
Shenzhen Jayo Technologies Co., Ltd.
China (Mainland)
Transaction Level:
13 Transactions(6 months)
820,000+
Response Rate
80.0%
Add to Compare Sponsored Listing
Contact Supplier Chat Now!
Whirlpool manufacturing Washing Machine Washer Control Circuit Board Diagram
US $0.1-10 / Piece
1 Piece (Min. Order)
Brand Name: BLD
Base Material: FR-4 epoxy resin,fr-4,cem-1,cem-3
Surface Finishing: ENIG/HASL /OSP
Min. Hole Size: 0.2mm(8mil)
Min. Line Spacing: 0.1mm(4mil)
Board Thickness: 1.6mm-3.2mm,0.2mm-4.5mm
Whirlpool manufacturing Washing Machine Washer Control Circuit Board Diagram 3 PhotosVideo
BLD Electronic Co., Ltd.
China (Mainland) Trade Assurance
Transaction Level:
63 Transactions(6 months)
420,000+
Response Rate
98.7%
Add to Compare Sponsored Listing
Contact Supplier Chat Now!
Universal Washing Machine pcb Control Board and pcba
US $0.4-5.55 / Piece
1 Piece (Min. Order)
Brand Name: fastpcba
Min. Hole Size: 0.1mm(4mil)
Min. Line Spacing: 3mil
Copper Thickness: 35um,1oz,2oz
Product manufacturing name: pcba
solder mask: green/black/white/red/blue/yellow,etc
Universal Washing Machine pcb Control Board and pcba 5 Photos
Shenzhen Jingbang Technology Co., Ltd.
China (Mainland)
Transaction Level:
Response Rate
96.3%
Add to Compare Sponsored Listing
Contact Supplier Chat Now!
Universal Washing Machine Control Board
US $0.1-38 / Piece
1 Piece (Min. Order)
Type: Washing Machine Parts
Model Number: FM_050515-00001
Brand Name: ODM/OEM
Place of Origin: CN
Layers:: 1-32 layers
SMD Pitch (a):: 0.2 mm(8 mil)
Universal Washing Machine Control Board 5 Photos
Shenzhen Fumax Technology Co., Ltd.
China (Mainland) Trade Assurance
Transaction Level:
10 Transactions(6 months)
Original manufacturing PCBA manufacturer customized Electronic PCB keyboard PCBA Assembly
US $20-50 / Piece
2 Pieces (Min. Order)
Brand Name: zens
Model Number: Electronic PCB
Surface Finishing: HASL,HASL, OSP, Immersion Gold/Au,immersion silver
Min. Hole Size: 3mil (0.075mm)
Copper Thickness: 0.3oz-3oz
Product name: Pcb Board Assembly
Original PCBA manufacturer customized Electronic PCB keyboard PCBA Assembly 2 Photos
Shenzhen ZENS Electronics Co., Ltd.
China (Mainland) Trade Assurance
Transaction Level:
6 Transactions(6 months)
5,000+
Response Rate
89.3%
Add to Compare Similar Products
Contact Supplier Chat Now!
Customized manufacturing PCB-12 assembly design
US $3.0 / Pieces
500 Pieces (Min. Order)
Place of Origin: Guangdong,China (Mainland)
Brand Name: ODM
Min. Line Width: 0.03mm
Min. Line Spacing: 0.08mm
Copper Thickness: 1/2OZ 1OZ 2OZ 3OZ
Board Thickness: 1.6mm-3.2mm
Customized PCB-12 assembly design 6 Photos
Dongguan Access Star Electronic Co., Ltd.
China (Mainland) Trade Assurance
Transaction Level:
Response Rate
83.3%
Add to Compare Similar Products
Contact Supplier Chat Now!
Chinese pcba manufacturing manufacture supply all electronic pcba/pcb assembly
US $1.08-1.2 / Pieces
2000 Pieces (Min. Order)
Place of Origin: Zhejiang,China (Mainland)
Base Material: FR-4
Min. Hole Size: 0.04mm
Min. Line Width: 0.03mm
Board Thickness: 1-1.6mm
Product name: Usb Charger Pcb
Chinese pcba manufacture supply all electronic pcba/pcb assembly 4 Photos
Ningbo Echal Electronics & Technology Co., Ltd.
China (Mainland) Trade Assurance
Transaction Level:
Response Rate
70.6%
Add to Compare Similar Products
Contact Supplier Chat Now!
Electronic one stop pcba manufacturer,custom made printed circuit board assembly
US $0.1 / Unit
1 Unit (Min. Order)
Place of Origin: Guangdong,China (Mainland)
Model Number: HTPCB-1004
Base Material: FR-4,Aluminum base,PI
Min. Hole Size: Mechanical hole: 0.15mm Laser hole: 0.1mm
Min. Line manufacturing Width: 0.05mm
Copper Thickness: 0.5-6OZ
Electronic one stop pcba manufacturer,custom made printed circuit board assembly
Shenzhen Hongtai Technology Co., Ltd.
China (Mainland) Trade Assurance
Transaction Level:
11 Transactions(6 months)
100,000+
Response Rate
91.4%
Add to Compare Similar Products
Contact Supplier manufacturing Leave Messages
Electronic 2 layers,4 layers,6 layers PCBA Manufacturer PCB Assembly
US $0.1-1.0 / Pieces
10 Pieces (Min. Order)
Min. Hole Size: 0.25mm
Surface Finishing: HASL
Place of Origin: Guangxi,China (Mainland)
Model Number: Customized
Board Thickness: 1.6mm
Product name: PCBA Manufacturer PCB Assembly
Electronic 2 layers,4 layers,6 layers PCBA Manufacturer PCB Assembly 3 Photos
Guilin Lijiang manufacturing Information Industry Group Co., Ltd.
China (Mainland) Trade Assurance
Add to Compare Similar Products
Contact Supplier Chat Now!
power supply pcb manufacturing Electronic circuit board,ul fr4 94v-0 pcb board,pcb prototype & pcb assembly manufacturer! UL&RoHS!
US $0.1-4 / Piece
1 Piece (Min. Order)
Place of Origin: Guangdong,China (Mainland)
Brand Name: semshine
Model Number: spcb-005
Base Material: FR-4/HTG150-180 FR-4/CEM-1/CEM-3/Aluminum
Surface Finishing: Lead free HASL
Min. Hole Size: 0.2mm
power supply pcb Electronic circuit board,ul fr4 94v-0 pcb board,pcb prototype & pcb assembly manufacturer! UL&RoHS! 4 Photos
Shenzhen Semshine Tech Co., Ltd.
China (Mainland) Trade Assurance
Transaction Level:
3 Transactions(6 months)
More than welcome on the thread.!!
Can you check and see if that model has a sealed drum.? by this I mean turn it on its side and check if the plastic drum is 2 halves held together by a ring of torx screws. If its not, that manufacturing is just 1 molded piece that seems 'plastic welded' together then its not worth your while replace the PCB as the life of these type drums is circa 5 years. You cannot replace the drum bearings on these, manufacturing need to buy a complete drum, approx. €150.
So no point buying a PCB and finding the drum packs in after a few weeks/months.
On the 'screwed together' drums a fairly handy DIY person can replace bearings.

It is worth noting that, under current manufacturing UK legislation there is no legal requirement for a manufacturer of any product to supply technical or wiring information. So, if you do have a problem, in a great many cases don't expect a lot of help as, even if we can access the information and diagrams we are legally restricted in passing it on due to copyright legislation. Yes, we know, it's madness and we'd love to change it but that's the way it is for now.

It worked! Thanks. We have manufacturing an HE4T, bought around 12 years ago. Used twice a day. For the last couple of years it would throw an occasional DL code, and we had the ritual of opening the top and jiggling the pink heavy duty wires at the control board and that seemed to work. Went on like this for a long time. We had a matching set of W/D and pedestals so I didn't want to give up on them. I do have some electronics background, so I was keen to fix it. I thought maybe the one of the plugs was bad, or even the board. I removed the board and re-soldered key areas I thought may be the problem, even soldered wires direct from the 4-lead DL pink plug to no avail. It turned out it was the K4 RELAY, not the K1 for us. The K1 looked perfect, but the K4 had arc dust on the closing set (normally open) contact. I filed the contacts with fine grit paper. But I swapped the two relays upon reinstallation (let the other cleaner really have a go at the next 12 years). So far all good. Will buy new relays though.

Unplug the washer’s power cord and slide the machine away from the wall. Turn off the hot and cold water supply faucets. Disconnect the hose couplings from the back of the machine, using channel-lock pliers.
2
Remove the three angled screws securing the lower back edge of the control panel to the washer, using a Phillips screwdriver. Rotate the panel forward to reveal the oblong, gray control board mounted in the middle of manufacturing the opening.
3

I have faced problems with Top Loading "Whirlpool" Automatic Washing Machine Control Panel.I had purchased this machine 5 years back in India. These machines are mfd. in India.Initially manufacturing there was problem with load balancing as clothes if just dumped in chamber would make eccentric load and there was loud sound of inner barrel hitting outer barrel. I started loading clothes in manner so that there is uniform load around barrel.Thus this problem was solved.

Now about five months back the control panel consisting of PCB stopped working. I had to replace complete panel @$150. It worked for five months and again it went bust.

Mechanic informed me that these panels are imported from China and are of unreliable quality.
Control Board Assembly and high quality washing machine control board pcba
US $0.1-50 / Piece
Add to Compare Similar Products
Contact Supplier Chat Now!
Custom electronic circuit boards General USB Flash Disk PCBA manufacturer in china
US $0.2-5 / Piece
1 Piece (Min. Order)
Place of Origin: Guangdong,China (Mainland)
Brand Name: advancing
Surface Finishing: Lead Free HASL
Min. Line Width: 0.25mm
Copper Thickness: 1OZ
Board Thickness: 1.5mm
Custom electronic circuit boards General USB Flash Disk PCBA manufacturer in china
Shenzhen Zhuojin Electronic Co., Ltd.
China (Mainland)
Add to Compare Similar Products
Contact Supplier Chat Now!
Electronic PCB Assembly Service, PCBA manufacturer PCBA
US $0.6-2.8 / Piece
1 Piece (Min. Order)
Brand Name: OEM
Model Number: Customized
Base Material: FR-4/aluminum/ceramic/cem-3/FR-1
Surface Finishing: HASL
Min. Hole Size: 0.20mm
Copper Thickness: 1/3oz ~6oz
Electronic manufacturing PCB Assembly Service, PCBA manufacturer PCBA 4 Photos
Suzhou Fengfan Electronic Technology Co., Ltd.
China (Mainland) Trade Assurance
Add to Compare
Contact Supplier Chat Now!
universal tv board tv circuit boards manufacturer with Electronic Components assembly
US $1.9-2.9 / Piece
1 Piece (Min. Order)
Place of Origin: Guangdong,China (Mainland)
Brand Name: OEM/ODM
Model manufacturing Number: m12 pcb connector
Base Material: PCB Circuit Board,FR4/AL/FPC
Min. Line Width: 3mil(0.075mm),0.10mm(4mil)
Copper Thickness: 1/2 Oz.Copper.003"+/-.0005"(0.0762mm),1/2OZ 1OZ 2OZ 3OZ
universal tv board tv circuit boards manufacturer with Electronic Components assembly 6 PhotosVideo
Huizhou Genphoal Technology Co., Ltd.
China (Mainland)
Transaction Level:
Response Rate
85.7%
Add to Compare Similar Products
Contact Supplier Chat Now!
10 years Experience for Lithium ion 4.4V Battery PCBA Manufacturer 4L Battery PCB assembly
US $0.04-0.5 / Piece
3000 Pieces (Min. Order)
Place of Origin: Guangdong,China (Mainland)
Brand Name: OEM ODM
Base Material: FR-4
Surface Finishing: spary tin
Min. Line Width: 0.1 0mm
Copper Thickness: 1OZ
10 years Experience for Lithium ion 4.4V Battery PCBA Manufacturer 4L Battery PCB assembly 4 Photos
Shenzhen Jinlonggewang Electronics Co., Ltd.
China (Mainland) Trade Assurance
Transaction Level:
Response Rate
88.2%
Add to Compare Similar Products
Contact Supplier Leave Messages
HASL ENIG OSP manufacturing electronic PCBA board and assembled pcba populated pcb assembly manufacturer
US $1-5 / Piece
1 Piece (Min. Order)
Place of Origin: Guangdong,China (Mainland)
Surface Finishing: Immersion Gold
Min. Hole Size: 0.20mm
Min. Line Spacing: 3 Mil (0.075 Mm)
Copper Thickness: 1/2OZ 1OZ 2OZ 3OZ
Board Thickness: 1.6mm-3.2mm
HASL ENIG OSP electronic manufacturing PCBA board and assembled pcba populated pcb assembly manufacturer 5 Photos
Shenzhen Gaofuheng Electric Technology Co., Ltd.
China (Mainland)
Response Rate
0.0%
Add to Compare Similar Products
Contact Supplier Leave Messages
OEM multi-layer fr4 Tg170 electronic pcb assembly manufacturer
US $1.0-10.0 / Piece
1 Piece (Min. Order)
Model Number: Customized
Base Material: FR-4, Aluminum, Polyimide, PTFE
Surface Finishing: HASL, HASL RoHS, ENIG, ENEPIG, Immersion Silver, Immersion Tin, OSP
Min. Hole Size: 0.1mm
Min. Line Width: 3mil/0.0762mm
Copper Thickness: 0.5oz-6.0oz (18um-210um)
OEM multi-layer fr4 Tg170 electronic pcb assembly manufacturer 2 PhotosVideo
Shenzhen Flying Technology Co., Ltd.
China (Mainland) Trade Assurance
Add to manufacturing Compare Similar Products
Contact Supplier Chat Now!
PCB PCBA Circuit Board Assembly Manufacture For Air Purifier Juicer Computer Home Appliance
US $5-49 / Piece
1 Piece (Min. Order)
Model Number: ZT-air007
Surface Finishing: Immersion Silver
Min. Hole Size: 3mil (0.075mm)
Min. Line Spacing: 0.1um(3mil)
Product name: Industrial PCBA
Application: Electronics Device
PCB PCBA Circuit Board Assembly Manufacture For Air Purifier Juicer Computer Home Appliance 3 Photos
Hangzhou manufacturing Panzhuo Technology Co., Ltd.
China (Mainland) Trade Assurance
Transaction Level:
14 Transactions(6 months)
8,000+
Response Rate
86.4%
Add to Compare Similar Products
Contact Supplier Chat Now!
PCB Fabrication manufacturing Manufacturer and Electronic Circuit Design
US $0.1-0.5 / Piece
1 Piece (Min. Order)
Brand Name: HRCIRCUITS
Base Material: FR4
Surface Finishing: HASL/ENIG/Plating Gold/Immersion Tin/immersion silver/OSP
Min. Line Width: 0.1mm
Min. Line Spacing: 0.1mm
Copper Thickness: 1oz - 6oz
PCB Fabrication Manufacturer and Electronic Circuit Design 2 Photos
Shenzhen Hi-Rigid Circuit Co., Ltd.
China (Mainland)
Transaction Level:
Response Rate
93.8%
Add to Compare manufacturing Similar Products
Contact Supplier Chat Now!
Chinese electronics smt smd pcba assembly manufacture for public use self-service machines
US $65.0-73.0 / Piece
1 Piece (Min. Order)
Place of manufacturing Origin: Guangdong,China (Mainland)
Brand Name: JLD(jinglingda)
Model Number: JLD056
Base Material: FR-4
Surface Finishing: ENIG
Min. Hole Size: 8mil
Chinese electronics smt smd pcba assembly manufacture for public use self-service machines 2 Photos
Shenzhen JLD Technology Co., Ltd.
China (Mainland)
Response Rate
63.6%
Add to Compare Similar Products
Contact Supplier Chat Now!
customized design china manufacturer excellent material electronic pcb board
US $0.1-10 / Piece
2000 Pieces (Min. Order)
Brand Name: DYC
Model Number: DYC-0910
Base Material: FR-4
Min. Line Width: 0.2mm
Copper Thickness: 0.5-2.0 oz
Board Thickness: 0.2-3.0mm
customized manufacturing design china manufacturer excellent material electronic pcb board 5 Photos
Cixi Dayi Village Electronic Technology Co., Ltd.
China (Mainland)
Response Rate
100.0%
Add to Compare Similar Products
Contact Supplier Chat Now!
Shenzhen Manufacturer OEM/ODM PCBA assembly electronic pcb printed circuit board
US $0.001-100 / Piece
1 Piece (Min. Order)
Place of Origin: Guangdong,China (Mainland)
Brand Name: HUA XING
Base Material: FR-4/aluminum/ceramic/cem-3/FR-1
Surface Finishing: HASL Lead Free,HASL,ENIG,immersion silver,immersion tin,OSP,etc
Min. Line Spacing: 0.1mm(4mil)
Board Thickness: 0.2mm--3.2mm
Shenzhen Manufacturer OEM/ODM PCBA assembly electronic pcb printed circuit board 6 Photos
Shenzhen Huaxing PCBA Limited
China (Mainland) manufacturing Trade Assurance
Transaction Level:
3 Transactions(6 months)
10,000+
Response Rate
75.0%
Add to Compare Similar Products
Contact Supplier Chat Now!
OEM Electronic PCB&PCBA Assembly Manufacturer
US $6-7 / Piece
100 Pieces (Min. Order)
Place of Origin: Zhejiang,China (Mainland)
Base Material: FR4
Surface Finishing: HASL lead free,HASL/HASL lead free,Heavy gold plate
Min. Line Width: 0.075um(3mil)
Copper manufacturing Thickness: 1oz,0.5 - 7.0 OZ
Board Thickness: 0.21mm-7.0mm,0.21mm - 7.0mm
OEM Electronic PCB&PCBA Assembly Manufacturer 6 Photos
Hangzhou Smart Technology Co., Ltd.
China (Mainland) Trade Assurance
Transaction Level:
7 Transactions(6 months)
You will note that the two boards are connected using three sets of wire. There are two sets of data cables with the multitude of colors - the geek out there could tell you the proper name manufacturing for them - and a power supply cable.

These are all removed from the control board side. There are clips that hold these in place that are easily released by pressing down. You should take care to pull these out with care - they can take some effort though, just don't torque them back and forth, manufacturing and don't pull on the cable but use the plastic fitting.

Remove the power cable from the brackets in the housing.

The control knob is needed for the replacement board (unless you ordered one with it). It is made up of two parts: an outer transparent cover, and the silver button itself. While manufacturing it might be possible to pull both the cover and button off in one piece, I found that it would not. I removed the outer cover by prying. The inside button was then able to be removed from it's spindle.

Working in a busy spares department for many years we will often get people that woudl come to the spares counter or calling us daily asking how much a new programmer was for their machine. Without exception we would ask the simple question "What's wrong with it, are you sure you want that part?" because in more than 90% of cases we knew, even before asking the person, then the timer, programmer or module wasn't faulty at all.

We are going to be candid here, most people take a guess and haven't actually got a clue what the real problem is. So we often wonder, if you're having a guess at it why do people always pick the most expensive part to take a punt on?

So nothing much has changed in this respect over the past twenty years or so.

But what we try to do is help people with a gentle nudge in the right direction in an attempt to inform people that timer faults on washing machines and washer dryers, whilst they do happen, are not as common as people think they are.

Even engineers can sometimes be led to that conclusion incorrectly.

A person (you perhaps) has a problem with the appliance, the programmer starts going cuckoo and so the person tries to find out what the code means. They can't so they call up and ask for the price of a repair or a new part, thinking that the main timer is goosed, only to find that the cost to replace it is prohibitive.

Add to Compare Similar Products
Contact Supplier Leave Messages
Shenzhen FR4 PCB board assembly PCB/PCBA manufacture
US $0.1-10 / Piece
1 Piece (Min. Order)
Min. Line Spacing: 0.003"
Min. Line Width: 0.1mm(Flash Gold)/0.15mm(HASL)
Surface Finishing: HASL
Place of manufacturing Origin: Guangdong,China (Mainland)
Base Material: FR-4/aluminum/ceramic/cem-3/FR-1
Brand Name: Welink
Shenzhen FR4 PCB board assembly PCB/PCBA manufacture 5 PhotosVideo
Shenzhen Welink Electronics Co., Ltd.
China (Mainland) Trade Assurance
Transaction Level:
Response Rate
80.0%
Add to Compare Similar Products
Contact Supplier Leave Messages
Electronic Circuit Board China Manufacturer Bluetooth Pcb
US $0.2-0.25 / Piece
1 Piece (Min. Order)
Place of Origin: Guangdong,China (Mainland)
Base Material: FR-4/aluminum/ceramic/cem-3/FR-1
Surface Finishing: HASL
Min. Line Width: 3mi
Copper Thickness: 1/2OZ 1OZ 2OZ 3OZ
Board manufacturing Thickness: 1.6mm
Electronic Circuit Board China Manufacturer Bluetooth Pcb 5 Photos
Shenzhen Sunsoar Tech Co., Ltd.
China (Mainland) Trade Assurance
Transaction Level:
1 Transaction(6 months)
4,000+
Response Rate
93.3%
Add to Compare Similar Products
Contact Supplier Chat Now!
Shenzhen Electronic PCB Manufacturer & assembly LWS-4S4A-033(4S)
10 Pieces (Min. Order)
Surface Finishing: HASL,lead free HASL,OSP,ENIG
Place of Origin: Guangdong,China (Mainland)
Base Material: FR-4
Brand Name: LWS
Model Number: LWS-4S4A-033(4S)
Shenzhen Electronic manufacturing PCB Manufacturer & assembly LWS-4S4A-033(4S)
Shenzhen Li-Ion Battery Bodyguard Technology Co., Limited
China (Mainland) Trade Assurance
Transaction Level:
6 Transactions(6 months)
9,000+
Response Rate
76.7%
Add to Compare Similar Products
Contact Supplier Chat Now!
Turnkey electronics product manufacturer Service with 6 DIP line
US $1-10 / Piece
1 Piece (Min. Order)
Place of Origin: Guangdong,China (Mainland)
Brand Name: OEM
Surface Finishing: HAL, Gold Plating, Immersion Gold, OSP, Immersion Silver, Immersion T
Min. Line Spacing: 0.08mm
Copper Thickness: 1 Oz
Board Thickness: 1 OZ - 10 OZ
Turnkey manufacturing electronics product manufacturer Service with 6 DIP line
Shenzhen Amissiontech Co., Ltd.
China (Mainland)
Transaction Level:
1 Transaction(6 months)
700+
Response Rate
87.5%
Add to Compare Similar Products
Contact Supplier Chat Now!
Professional PCBA manufacturer infrared induction PCB design and assembly for electronics
US $1.95-2.2 / Pieces
2000 Pieces (Min. Order)
Brand Name: DC
Model Number: DC-IND-1508
Surface Finishing: OSP
Min. Line Spacing: 0.15mm
Board Thickness: 1mm
Application: Timer PCB for Electronics
Professional manufacturing PCBA manufacturer infrared induction PCB design and assembly for electronics 3 Photos
Ningbo Dechamp Electronics & Technology Co., Ltd.
China (Mainland)
Response Rate
0.0%
Add to Compare Similar Products
Contact Supplier Leave Messages
Manufacture electronic PCB assembly, PCB assembly factory
US $0.3-0.35 / Unit
1 Unit (Min. Order)
Min. Hole Size: 0.25mm
Min. Line Width: 0.1mm
Surface Finishing: Immersion gold
Place of Origin: Guangdong,China (Mainland)
Brand Name: OEM
Model Number: XP-5886
Manufacture electronic PCB assembly, PCB assembly factory
Shenzhen Akeson Circuit Co., Ltd.
China (Mainland)
Transaction Level:
5 Transactions(6 months)
90,000+
Response Rate
25.0%
Add to Compare Similar Products
Contact Supplier Leave Messages
Electronic Customized PCBA Manufacturer, OEM/ODM PCB Assembly, SMT/DIP PCBA assembly
US $1-10 / Unit
10 Units (Min. Order)
Place of Origin: Guangdong,China (Mainland)
Brand Name: Fullwill PCBA
Base Material: FR-4,CEM-3,Taconic,Rogers,ALU,FR-1
Min. Line Spacing: 3mil
Copper Thickness: 0.3oz-3oz
Board Thickness: 0.3mm-6mm
Electronic Customized PCBA Manufacturer, OEM/ODM PCB Assembly, SMT/DIP PCBA assembly
Shenzhen Fullwill Technology Co., Ltd.
China (Mainland)
Response Rate
50.0%
Add to Compare
Contact Supplier Leave Messages
Air purifier manufacturing circuit control board assembly, air cleaner pcba,air cleaner pcba electronic manufacturing services pcb assembly
US $1-50 / Piece
1 Piece (Min. Order)
Model Number: XT-031420-X.PCB
Base Material: FR-4(customized)
Min. Hole Size: 0.15mm
Min. Line Width: 0.15mm
Min. Line Spacing: 0.15mm
Copper Thickness: 1oz
Air purifier circuit control board assembly, air cleaner pcba,air cleaner pcba electronic manufacturing services pcb assembly 3 Photos
Zhuhai Sounds Electric Co., Ltd.
China (Mainland)
Response Rate
72.7%
Add to Compare Similar Products
Contact Supplier Leave Messages
OEM Electronic pcb/pcba solder mask dry film pcb assembly manufacturer
US $1-100 / Piece
1 Piece (Min. Order)
Model Number: oem pcb assembly
Surface Finishing: HASL
Min. Hole Size: Machine Drilling 0.2mm; Laser Drilling 0.1mm
Min. Line Width: 3mi
Copper Thickness: 1oz
Board manufacturing Thickness: 1.6mm
OEM Electronic pcb/pcba solder mask dry film pcb assembly manufacturer 5 Photos
Shenzhen Hengkaituo Sci-Tech Co., Ltd.
China (Mainland) Trade Assurance
Transaction Level:
13 Transactions(6 months)
4,000+
Response Rate
80.8%
Add to Compare Similar Products
Contact Supplier Leave Messages
electronic toy car pcba manufacturer
1 Piece (Min. Order)
Brand Name: AND Tech
Model Number: electronic toy car pcba manufacturer
Base Material: FR4
Surface Finishing: HASL/HASL lead free, lmmers,HASL/Lead free/Immersion Gold etc
Min. Line Spacing: 0.075mm(3mil)
Board Thickness: 0.8mm/1.6mm
electronic manufacturing toy car pcba manufacturer
Shenzhen AND Technologies Co., Ltd.
China (Mainland)
Transaction Level:
Response Rate
60.0%
Add to Compare Similar Products
Contact Supplier Leave Messages
Factory supplier short delivery pcba manufacturing electronic pcb assembly
Add to Compare Similar Products
Contact Supplier Chat Now!
washing machine parts Universal Washing Machine Main / Control / Computer Board
US $10.8-11.2 / Pieces
200 Pieces (Min. Order)
Material: ABS
Type: Washing Machine Parts
Model Number: WC618LED-S
Brand Name: JHT,OEM
Place of Origin: Sichuan,China (Mainland)
Voltage: 110V-240V
washing machine parts Universal Washing Machine Main / Control / Computer Board 5 Photos
Sichuan Junhengtai Electronic & Electric Appliance Co., Ltd.
China (Mainland)
Transaction Level:
Response Rate
82.1%
Add to Compare Similar Products
Contact Supplier Chat Now!
Suoer Best Price Universal Washing Machine Control Board with Good Quality
100 Pieces (Min. Order)
Type: Washing Machine Parts
Place of Origin: Guangdong,China (Mainland)
Brand Name: Suoer
Model Number: 50270751-Royalstar-60-885G
Suoer Best manufacturing Price Universal Washing Machine Control Board with Good Quality
Guangzhou Golden Hongfa Electronic Trading Co., Ltd.
China (Mainland) Trade Assurance
Transaction Level:
20 Transactions(6 months)
10,000+
Response Rate
74.6%
Add to Compare Similar Products
Contact Supplier Chat Now!
Waterproof LCD universal washing machine computer control PCB board SXY2299
US $7-9.7 / Piece
50 Pieces (Min. Order)
Type: Washing Machine Parts
Place of Origin: Guangdong,China (Mainland)
Brand Name: SXY
Model Number: SXY2299
Panel size: 12.2*7.4cm
PCB board size: 19.5*6.cm
Waterproof manufacturing LCD universal washing machine computer control PCB board SXY2299 5 Photos
Guangzhou Icecool Refrigeration Equipment Co., Ltd.
China (Mainland) Trade Assurance
Transaction Level:
10 Transactions(6 months)
6,000+
Response Rate
78.1%
Add to Compare Similar Products
Contact Supplier Chat Now!
Washing machine control board
US $0.5-1.0 / Pieces
100 Pieces (Min. Order)
Place of Origin: Guangdong,China (Mainland)
Base Material: FR-4 Epoxy Resin
Surface Finishing: HASL
Min. Hole Size: 0.20mm
Min. Line Spacing: 4/4mil(0.1/0.1mm)
Copper Thickness: 1/2OZ 1OZ 2OZ 3OZ
Washing machine control board
Shenzhen Rayming Electronic Co., Ltd.
China (Mainland)
Response Rate
59.1%
Add to Compare Similar Products
Contact Supplier Leave Messages
Low cost FR4, CEM-1 and aluminum substrate washing machine control pcb circuit board
US $10-100 / Square Meter
1 Square Meter (Min. Order)
Brand Name: British Fitow
Model Number: YFT001
Surface Finishing: HASL
Min. Line Width: 0.1mm
Type: PCB
Application: Electronics, etc.
Low cost FR4, CEM-1 and aluminum substrate washing machine control pcb circuit board 6 Photos
Guangde manufacturing Yingfeite Electronic Co., Ltd.
China (Mainland)
Response Rate
83.3%
Add to Compare Similar Products
Contact Supplier Chat Now!
Wholesale Custom washing machine control blank rohs Fr4 94v0 pcb boards
US $0.1-3 / Piece
1 Piece (Min. Order)
Brand Name: SenYanPCB
Model Number: Customized
Surface Finishing: HASL,OSP,ENIG
Min. Hole Size: 0.2mm
Min. Line Width: 0.1mm
Copper Thickness: 1oz
Wholesale manufacturing Custom washing machine control blank rohs Fr4 94v0 pcb boards
Shenzhen Senyan Circuit Co., Ltd.
China (Mainland) Trade Assurance
Transaction Level:
3 Transactions(6 months)
5,000+
Response Rate
65.4%
Add to Compare Similar Products
Contact Supplier Leave Messages
Wholesale shenzhen universal washing machine control circuit board
US $15.5-22.5 / Piece
1000 Pieces (Min. Order)
Brand Name: Jayo
Min. Hole Size: 0.10 mm
Min. Line Spacing: 3mil (0.075mm)
Copper Thickness: 1oz
Board Thickness: 1.0mm
Product name: washing machine control board
Wholesale shenzhen universal washing machine control circuit board 6 Photos
Shenzhen Jayo Technologies Co., Ltd.
China (Mainland)
Transaction Level:
Response Rate
83.3%
Add to Compare Similar Products
Contact Supplier Chat Now!
washing machine parts Universal Washing Machine Main / Control / Computer Board
US $6.5-10 / Piece
100 Pieces (Min. Order)
Material: ABS
Type: Washing Machine Parts
Model Number: Universal
Brand Name: Universal
Place of Origin: Guangdong,China (Mainland)
Voltage: 110V-240V
washing machine parts Universal Washing Machine Main / Control / Computer Board 6 Photos
Shenzhen Zhilida Plastic Mold & Electronics Co., Ltd.
China (Mainland)
Response Rate
94.4%
Add to Compare
Contact Supplier I'm Away
OEM manufacturing hot drink machinecontrol board SMT control board for hot drink machine washing machine control board
US $1-50 / Piece
1 Piece (Min. Order)
Brand Name: HUA XING
Model Number: Customized
Surface manufacturing Finishing: HASL Lead Free,HASL,ENIG,immersion silver,immersion tin,OSP,etc
Min. Line Spacing: 0.1mm(4mil)
Copper Thickness: 0.25 Oz -12 Oz
Board Thickness: 0.2mm--3.2mm
OEM manufacturing hot drink machinecontrol board SMT control board for hot drink machine washing machine control board 2 Photos
Shenzhen Huaxing PCBA Limited
China (Mainland) Trade Assurance
Transaction Level:
3 Transactions(6 months)
Washing Machine FR4 PCBA
China Washing Machine FR4 PCBA
2
US$ 0.1 - 1 / Piece
1 Piece (Min. Order)
Supplier Details
Inquire Now Add this product to Inquiry Basket
9 keys IR remote control for washing machine
China 9 keys IR remote control for washing machine
2
2000 Pieces (Min. Order)
Supplier Details
Inquire manufacturing Now Add this product to Inquiry Basket
Washing machine universal PCB control computer board New
China Washing machine universal PCB control computer board
6
US$ 7 / Piece
1 Piece (Min. Order)
Freight Cost Available
Supplier Details
Inquire Now Add this product to Inquiry Basket
All new laser machine parts control board
China All new laser machine parts control board
If you stop and think about it, if you are a major retailer or you are a manufacturer that is concentrating on volume and market share then where does you r interest lie? It's not hard to work it out, it relies massively on selling more and more appliances. Do you honestly believe that many of these companies are there to save you money and will help you avoid buying a new machine from them?

Ah but, you say, I won't buy the same rubbish again! Well, actually, you very likely will or from another that's just as bad, have a read at this article called "What Is In A Name" or indeed read about own label brands as there aren't as many actual makers as there are brand names, not even remotely close.

You don't really think you will win do you against the might of massive corporations and international retailers they have all us, their customers, well sussed out? Well, you can in some small way escape some of this rat race by buying a bit smarter in the first place by getting good advice, buying decent appliances and not being tempted by fancy blue LEDs or some other funky feature and a low price.

Well what I found out was that it is not hard at all. Now I am not a manufacturing professional installer, and took on the install at my own risk, if choose to do your own install you run the same risk. For me this replacement was simple and straightforward, and would have taken anyone no more than half hour. Including taking the pictures I did this replacement in about 15min.

So, the other day the wife uttered the following words to me completely out of the blue "I need a new washing machine"........at which point I spluttered on my beer, the thoughts of needless & severe wallet surgery taking place. "Not a chance I said........where's the patient?". I was led to the location of the offending machine.....and got to work.

The old mechanical controller manufacturing functioned like a player piano. A rotating drum with ridges actuate different cycles in the washing machine. Some of the cycles weren’t working properly so [hydronucleus] ripped them out. With the help of a schematic posted on the washing machine itself, the cycles were able to be programmed into the Arduino.

Genuine replacement electronic control board for your washing machine.
This can fit washing machines sold by different manufacturers and brands.
For a full list of models this part / accessory is suitable for click on "See more product details" & then click "See all product details"
This is a Genuine Product
Take safety precautions when repairing all appliances. Repairs to gas appliances should only be made by a Gas Safe Registered engineer.

Supplier Details
Inquire Now Add this product to Inquiry Basket
Machine control-board assembly & OEM manufacturer
China Machine control-board assembly & OEM manufacturer
1
US$ 5.6 - 6.7 / Piece
100 Pieces (Min. Order)
Freight Cost Available
Supplier Details
Inquire Now Add this product to Inquiry Basket
Controlled machine PCB fabrication and assembly
China Controlled machine PCB fabrication and assembly
8
US$ 25 - 30 / Piece
1 Piece (Min. Order)
Freight Cost Available
Supplier Details
Inquire Now Add this product to Inquiry Basket
Washing machine slot cleaner for home cleaning 125mL*2 pi...
China Washing machine slot cleaner for home cleaning 125mL*2 pieces/box
5
US$ 0.3 - 1 / Box
5000 Boxes (Min. Order)
Supplier Details
Inquire Now Add this product to Inquiry Basket
Washing machine cleaner for home cleaning 20g*6 pieces/bo...
China Washing machine cleaner for home cleaning 20g*6 pieces/box
5
US$ 0.3 - 1 / Box
5000 Boxes (Min. Order)
Supplier Details
Inquire Now Add this product to Inquiry Basket
washing machine board printed circuit board manufacturing
China washing machine board printed circuit board manufacturing
1
1 Piece (Min. Order)
Supplier Details
Inquire Now Add this product to Inquiry Basket
Washing machine controller
China Washing machine controller
1
US$ 5 - 15 / Set
1 Set (Min. Order)
Supplier Details
Inquire Now Add this product to Inquiry Basket
Small Washing Machine PCB Assembly, 94v0 RoHS
China Small Washing Machine PCB Assembly, 94v0 RoHS
2
US$ 0.1 - 1 / Piece
1 Piece (Min. Order)
Supplier Details
Inquire Now Add this product to Inquiry Basket
Electrical Control Panel Board Equipment for Feed Mill
China Electrical Control Panel Board Equipment for Feed Mill
2
US$ 12800 / Set
1 Set (Min. Order)
Supplier Details
Inquire Now Add this product to Inquiry Basket
3.5kW induction heating control board for plastic injecti...
China 3.5kW induction heating control board for plastic injection machine power saving system upgrade
8
US$ 58 / Piece
10 Pieces (Min. Order)
Freight Cost Available
Supplier Details
Inquire Now Add this product to Inquiry Basket
94v0 washing machine pcb board
China 94v0 washing machine pcb board
6
US$ 0.5 - 10 / Piece
1 Piece (Min. Order)
Supplier Details
Inquire Now Add this product to Inquiry Basket
Professional PCBA OEM/ODM for kitchen ventilator, washing...
China Professional PCBA OEM/ODM for kitchen ventilator, washing machine, rice cooker, coffee machine
8
US$ 200 / Piece
1 Piece (Min. Order)
Freight Cost Available
Supplier Details
Inquire Now Add this product to Inquiry Basket
Customized fr4 lg washing machine pcb board
China Customized fr4 lg washing machine pcb board
1
US$ 0.99 / Piece
1 Piece (Min. Order)
Freight Cost Available
Supplier Details
Inquire Now Add this product to Inquiry Basket
PCBA manufacturer washing machine board, 2016 hot 4-layer
China PCBA manufacturer washing machine board, 2016 hot 4-layer
1
US$ 1 / Piece
1 Piece (Min. Order)
Supplier Details
Inquire Now Add this product to Inquiry Basket
Washing Machine PCB Circuit Board
China Washing Machine PCB Circuit Board
1
US$ 1 / Piece
1 Piece (Min. Order)
Supplier Details
Inquire Now Add this product to Inquiry Basket
New product laser machine control board
China New product laser machine control board
2
US$ 290 / Set
1 Set (Min. Order)
Supplier Details
Inquire Now Add this product to Inquiry Basket
DDM driver board, used for washing machine motor
China DDM driver board, used for washing machine motor
1
100 Units (Min. Order)
Supplier Details
Inquire Now Add this product to Inquiry Basket
Controlled machine PCB fabrication and assembly
China Controlled machine PCB fabrication and assembly
8
US$ 8.5 - 12.58 / Piece
1 Piece (Min. Order)
Freight Cost Available
Supplier Details
Inquire Now Add this product to Inquiry Basket
Chinese Washing Machine PCB, Board PCBA
China Chinese Washing Machine PCB, Board PCBA
1
US$ 0.1 - 5 / Piece
1 Piece (Min. Order)
Supplier Details
Inquire Now Add this product to Inquiry Basket
Induction heater control board for plastic injection mach...
China Induction heater control board for plastic injection machine
6
US$ 35 / Set
10 Sets (Min. Order)
Supplier Details
Inquire Now Add this product to Inquiry Basket
5KW induction heater control board for plastic injection
Add to Compare Similar Products
Contact Supplier Chat Now!
pcb washing machine electronic board led driver pcb assembly remote control pcb board
US $1-1.5 / Piece
10 Pieces (Min. Order)
Place of Origin: Guangdong,China (Mainland)
Brand manufacturing Name: MANKUN
Model Number: 8259
Surface Finishing: leadless
Min. Hole Size: 0.2mm
Board Thickness: 1.6mm
pcb washing machine electronic board led driver pcb assembly remote control pcb board
Guangzhou Mankun Electronic Co., Ltd.
China (Mainland) Trade Assurance
Transaction Level:
74 Transactions(6 months)
500,000+
Response Rate
63.0%
Add to Compare Similar Products
Contact Supplier Chat Now!
6KG Double sided PCBA for washing machine control board
US $25-28 / Unit
100 Units (Min. Order)
Brand Name: Yingke
Base Material: FR4 94V-0
Min. Hole Size: 0.8mm
Min. Line Width: 0.3mm
Min. Line Spacing: 0.3mm
Board Thickness: 1.6mm
6KG Double sided PCBA for washing machine control board 2 Photos
Guangdong Yingke Electrical Co., Ltd.
China (Mainland)
Response Rate
100.0%
Add to Compare Similar Products
Contact manufacturing Supplier Leave Messages
washing machine control power board,pcba assembly,electronics
US $0.01-5 / Piece
1 Piece (Min. Order)
Brand Name: BQC
Model Number: PCBA-01122-BQC
Base Material: FR4
Min. Line Width: 0.075mm
Min. Line Spacing: 0.075mm
Copper Thickness: 1 OZ
washing machine control power board,pcba assembly,electronics 6 Photos
Shenzhen Baiqiancheng Electronic Co., Ltd.
China (Mainland) Trade Assurance
Transaction Level:
1 Transaction(6 months)
200+
Response Rate
81.8%
Add to Compare Similar Products
Contact Supplier Chat Now!
Cutomerized universal washing machine pcb pcba control board clone service circuit board
US $0.1-5 / Set
1 Set (Min. Order)
Brand Name: Icecoman
Base Material: Aluminum Base
Surface Finishing: HASL
Min. Line Width: 0.1 0mm
Board Thickness: 0.005"-0.250"
Application: Ice machine
Cutomerized universal washing machine pcb pcba control board clone service circuit board 2 PhotosVideo
Henan manufacturing Icecoman Electronics Co., Ltd.
China (Mainland) Trade Assurance
Transaction Level:
3 Transactions(6 months)
800+
Response Rate
91.7%
Add to Compare Similar Products
Contact Supplier Chat Now!
Universal Washing Machine Control Board
US $0.1-9.9 / Piece
1 Piece (Min. Order)
Brand Name: OEM
Model manufacturing Number: MK-PCBA20151211JK21
Base Material: FR4
Surface Finishing: HASL
Min. Line Width: 0.075mm(3mil)
Min. Line Spacing: 0.075mm(3mil)
Universal Washing Machine Control Board
Shenzhen Eastwin Trading Ltd.
China (Mainland) Trade Assurance
Transaction Level:
87 Transactions(6 months)
590,000+
Response Rate
73.9%
Add to Compare Similar Products
Contact Supplier Chat Now!
Hot sale UL 94v0 universal washing machine control pcb circuit board with rohs blank cnc pcb manufacturer shenzhen
US $0.05-0.12 / Piece
1 Piece (Min. Order)
Place of Origin: Guangdong,China (Mainland)
Brand Name: Okey
Model Number: OKEY customized
Min. Hole Size: 0.2mm
Copper Thickness: 1OZ
Board Thickness: 0.4-3.0mm
Hot sale UL 94v0 universal washing machine control pcb circuit board with rohs blank cnc pcb manufacturer shenzhen 6 Photos
Shenzhen Okey Circuit Co., Ltd.
China (Mainland)
Transaction Level:
29 Transactions(6 months)
160,000+
Response Rate
84.2%
Add to Compare Similar Products
Contact Supplier Leave Messages
Electronics pcb universal washing machine control board
US $1-10 / Piece
1 Piece (Min. Order)
Place of Origin: Guangdong,China (Mainland)
Brand manufacturing Name: STHL
Model Number: Custom
Base Material: FR-4
Min. Hole Size: 0.20mm
Application: washing machine pcb board
Electronics pcb universal washing machine control board 2 Photos
Shenzhen STHL Technology Co., Ltd.
China (Mainland)
Transaction Level:
Response Rate
71.2%
Add to Compare Similar Products
Contact Supplier Chat Now!
Hot sell PCBA for universal washing machine control board with DIP
US $1-10 / Piece
10 Pieces (Min. Order)
Place of Origin: Guangdong,China (Mainland)
Brand Name: OEM ODM
Surface Finishing: HASL
Min. Line Spacing: 0.1mm4mil)
Board Thickness: 1.6mm
Type: PCBA assembly
Hot sell PCBA for universal washing machine control board with DIP 6 Photos
Shenzhen Unionway Technology Co., Ltd.
China (Mainland) Trade Assurance
Transaction Level:
Response Rate
64.3%
Add to Compare Similar Products
Contact manufacturing Supplier Chat Now!
washing machine control board lcd tv control board control board
US $0.1-1 / Piece
1 Piece (Min. Order)
Brand Name: DLO
Model Number: dlo-L2OSP385
Surface Finishing: HALS/HALS lead free
Min. Line Width: 0.075mm(3mil)
Min. Line Spacing: 0.075mm(3mil)
Board Thickness: 0.2mm-7mm
washing machine control board lcd tv control board control board 5 Photos
Shenzhen Daliou Electronic Co., Ltd.
China (Mainland)
Transaction Level:
Response Rate
56.0%
Add to Compare Similar Products
Contact manufacturing Supplier Leave Messages
High Quality OEM ODM universal washing machine control board pcb circuit board
Customs Data
US $0.16-8.3 / Piece
1 Piece (Min. Order)
Model Number: washing machine circuit board
Min. Line Width: 0.2mm
Min. Line Spacing: 0.2mm
Board Thickness: 1.6mm
Product name: OEM ODM universal washing machine control board pcb circuit board
Application: washing machine
High Quality OEM ODM universal washing machine control board pcb circuit board 6 Photos
Shenzhen FS Technology Co., Ltd.
China (Mainland) Trade Assurance
Transaction Level:
14 Transactions(6 months)
20,000+
Response Rate
75.5%
Add to Compare Similar Products
Contact manufacturing Supplier Chat Now!
Turnkey contract pcba for washing machine controller pcb board &pcba pcba usb manufacture
US $0.7-12 / Piece
1 Piece (Min. Order)
Model Number: pcba usb manufacture
Surface Finishing: OSP HASL Immersion Gold
Min. Hole Size: 0.12mm
Min. Line Width: 0.12mm
Min. Line Spacing: 0.12mm
Board Thickness: 1.0mm,1.2mm,1.6mm
Turnkey contract pcba for washing machine controller pcb board &pcba pcba usb manufacture 6 Photos
Shenzhen Golden Weald Electronic Co., Limited
China (Mainland)
Transaction Level:
2 Transactions(6 months)
4,000+
Response Rate
85.0%
Add to Compare Similar Products
Contact Supplier Chat Now!
XN-999 universal Washing Machine control board, washing machine PCB
US $6-10 / Piece
100 Pieces (Min. Order)
Type: Washing Machine Parts
Model Number: XN-999
Brand Name: XIANGNIU
Place of Origin: Guangdong,China (Mainland)
PCB: UNIVERSAL
washing machine type: pulsator washing machine
XN-999 universal manufacturing Washing Machine control board, washing machine PCB 5 Photos
Guangzhou Bada Electric Appliances Firm
China (Mainland)
Response Rate
12.5%
Add to Compare Similar Products
Contact Supplier I'm Away
good price Factory Supply good quality chinese products Washing Machine Computer control PCB Electronic Board
US $16.5-16.8 / Piece
100 Pieces (Min. Order)
Material: Plastic + Metal
Type: Washing Machine Parts
Model Number: 2017091921
Brand Name: for LG
Place of Origin: Fujian,China (Mainland)
Voltage: 220V AC
good price Factory Supply good quality chinese products Washing Machine Computer control PCB Electronic Board
Changle Tigers Electronics Co., Ltd.
China (Mainland)
Hey guys! Just wanted to tell anyone who's mentally (and miserably) preparing themselves to have to fix their washer.
I had same manufacturing problem: an f11 error that I could not clear....2 weeks of trying. I unplugged it, plugged it back in....i did this repeatedly....and nothing. Still had that error.
Anyway, when I finally got 'ready' to do this repair I took the stacked-on-top dryer off of it and in a last ditch effort, decided to plug it in.... you know, just one last time .... and I'll be a son of a b*tch! The manufacturing thing works. No code. No problems at all.
I've no clue as to whether the dryer being on top of it had anything to do with it, but one must admit, it sure is odd.....
Anyway..... you might just try leaving it unplugged for a few hours and always make that 1 last attempt! Ya never know.
Whew. I dodged that bullet. (for now)

Short Circuit - Checking The Circuit Board

If when you have removed the element it doesn’t get rid of the short, the next thing to disconnect is the circuit board. Once disconnected you can then check for a short there.

I have this control board from an LG washing machine and the main fuse is open so I suspect there is a short in the power supply section of it as there is no power on the front panels when plugged in and turned on. My question is in regards to the epoxy and although I think I already know the answer, I will ask anyways. There is a rubbery coating that the whole board is immersed in. Has anybody ever successfully removed one of these boards, repaired it and returned it to it's former glory. If you have, how did you go about doing it. I would be surprised if anybody has done this but curiosity has gotten the best of me.

If the short still hasn’t gone, move further along the line and try checking on the filter board. If the short still hasn’t gone then it’s likely to be in the plug and the cable and you’ll need to replace those.

The Machine Is Tripping The Electricity

Suitable for the following models- Candy At Amazon, we're constantly looking for ways to further reduce our environmental impact. Online shopping is inherently more environmentally friendly than traditional retailing. The efficiencies of online shopping result in a greener shopping experience than traditional retailing. This study explains manufacturing some of the benefits of the online shopping model. Frustration-Free Packaging Amazon Frustration-Free Packaging is a multi-year initiative designed to make it easier for customers to liberate products from their packages. Frustration-Free Packaging is easy-to-open, 100% recyclable and products ship in their own packages without additional shipping boxes -- it eliminates hard plastic "clamshell" cases and those annoying plastic-coated wire ties commonly used in toy packaging.

If your machine is tripping the electricity, the process for diagnosing is largely the same - however, it may be that a normal meter won’t show any fault being present.

Add to Compare Similar Products
Contact Supplier Leave Messages
Smart Electronics Custom-made washing machine control board,and android tv box pcba.
US $0.01-0.1 / Piece
1 Piece (Min. Order)
Place of Origin: Guangdong,China (Mainland)
Brand Name: Smart Bes
Base Material: FR4, TG, CEM-1, Aluminium
Min. Hole Size: 0.25mm
Min. Line Width: 0.2mm
Copper Thickness: 0.5-2.0 oz
Smart manufacturing Electronics Custom-made washing machine control board,and android tv box pcba. 4 Photos
Shenzhen S-Mart Electronics Co., Ltd.
China (Mainland) Trade Assurance
Transaction Level:
23 Transactions(6 months)
china alibaba electronic circuit PCB Cutter assembly supplier . PCB Cutter assembly manufacturer
US $8000-15000 / Set
1 Set (Min. Order)
Place of Origin: Jiangsu,China (Mainland)
Base Material: FPC /PCB punching
Brand Name: YUSH
Model Number: YSPL
Model:: YSPL
Size(mm):: 930 X 880X1230
china alibaba electronic circuit PCB Cutter assembly supplier . PCB Cutter assembly manufacturer 6 Photos
Suzhou Yushunli Electronic Co., Limited
China (Mainland)
Transaction Level:
Response Rate
0.0%
Add to Compare Similar Products
Contact Supplier I'm Away
consumer electronics 2016 for pcb pcba assembly taiwan Manufacturer
US $0.19-59.95 / Piece
1 Piece (Min. Order)
Brand Name: Customized
Base Material: FR-4,FR-5,Isola,BT,PTFE,PI
Surface Finishing: immersion gold,OSP,lead free HASL
Min. Hole Size: 0.0025" , 0.0635mm
Min. Line Width: 1.7mil , 0.043mm
Min. Line Spacing: 1.7mil , 0.043mm
consumer electronics 2016 for pcb pcba assembly taiwan Manufacturer 6 Photos
CREATE TOGETHER TECHNOLOGY CO., LTD.
Taiwan
Transaction Level:
Response Rate
66.7%
Add to Compare Similar Products
Contact Supplier Chat Now!
Ordinary electronic scale pcb module assembly circuit board manufacturer in China
US $1.5 / Pieces
500 Pieces (Min. Order)
Place of Origin: Guangdong,China (Mainland)
Model manufacturing Number: LS-PCBA-W44
Base Material: FR-4
Min. Hole Size: 0.254mm-0.40mm
Copper Thickness: 35/50micron
Board Thickness: 1.60mm
Ordinary electronic scale pcb module assembly circuit board manufacturer in China 2 Photos
Shenzhen Linsone Technology Limited
China (Mainland) Trade Assurance
Transaction Level:
47 Transactions(6 months)
30,000+
Response Rate
97.1%
Add to Compare Similar Products
Contact Supplier Leave Messages
Yingfeite manufacture HASL pcb assembly gps tracker pcb board
US $20-60 / Square Meter
1 Square Meter (Min. Order)
Min. Line Spacing: 0.12mm
Copper Thickness: 18~72um
Place of Origin: Anhui,China (Mainland)
Brand Name: Infeite
Model Number: YFT-OL-171215-31
Product name: Electronic Pcb
Yingfeite manufacture HASL pcb assembly gps tracker pcb board 3 Photos
Guangde Yingfeite Electronic Co., Ltd.
China (Mainland)
Response Rate
83.3%
Add to Compare
Contact Supplier Chat Now!
Chinese Factory OEM pcba manufacturer ,Sensor LED PCBA circuit board assembly
US $10-100 / Piece
500 Pieces (Min. Order)
Place of Origin: Guangdong,China (Mainland)
Brand Name: hkszksk
Min. Hole Size: 0.1mm, 0.15mm
Min. Line Width: 0.075mm/0.1mm(3mil/4mil), 0.1mm
Min. Line Spacing: 0.1mm/4mil, 0.075mm
Copper Thickness: 1oz
Chinese manufacturing Factory OEM pcba manufacturer ,Sensor LED PCBA circuit board assembly 6 Photos
Shenzhen KIOSK Electronic Co., Ltd.
China (Mainland) Trade Assurance
Transaction Level:
Response Rate
94.3%
Add to Compare
Contact Supplier Chat Now!
Professional consumer electronic pcb assembly pcba manufacturer in shenzhen
US $0.1-0.5 / Piece
1 Piece (Min. Order)
Base Material: FR-4
Board Thickness: 1.6mm
Copper Thickness: 1oz
Surface Finishing: HASL Lead Free
Certificate: ISO9001/CE/ROHS
Solder Mask: Green. Red. Blue. White. Black.Yellow
Professional consumer electronic pcb assembly pcba manufacturer in shenzhen 2 Photos
Shenzhen Yue Tong Electronics Ltd.
China (Mainland) Trade Assurance
Add to Compare
Contact Supplier Chat Now!
Cheap OEM Electronic pcb board making machine Assembly Manufacturer
US $0.1-30 / Piece
1 Piece (Min. Order)
Place of Origin: Guangdong,China (Mainland)
Base Material: FR-4
Surface manufacturing Finishing: Gold plus OSP
Min. Hole Size: 0.25MM
Min. Line Spacing: 0.1mm
Copper Thickness: 1.0MM
Cheap OEM Electronic pcb board making machine Assembly Manufacturer
Shenzhen Houtian Network Communication Technology Co., Ltd.
China (Mainland)
Transaction Level:
9 Transactions(6 months)
Inside you will note the control board, and a whole bunch of wires and stuff that you can ignore. The user interface board is sandwiched between that control board and the metal housing of the washer, inside of a plastic frame. manufacturing The whole top unit can now be tilted forward and laid face down on top of your washer. This will allow you to easily get the rest of the job done.

Control and power PCBs and interface units/switches to be easily accessible to remove and replace by service technician requiring no special tools or equipment.
Replacement PCBs, whole interface unit or dials and switches to be readily available in the UK for at least 5 years after the machine is last manufactured and at reasonable cost (less than 20% of the latest cost price of the new machine).

Cool Care Components is the Sole proprietorship based firm commenced in the year of 2010 at Bengaluru, Karnataka, (India). We are involved in dealing with the products such as Refrigerant Gas, R22 Refrigerant Gas, Fridge Spare Parts, Washing Machine Spare Parts, Microwave Components and many more. Our company is also engaged in providing Repairing Service. Our industry is renowned among the customers due to quality products and affordable prices. The main objective of our concern is to satisfy the clients by offering them the top quality products and services. The offered products are manufactured by utilizing optimum grade components and sophisticated techniques at our vendor’s end. All products and sevices are especially scrutinized with different parameters in order to provide the utmost quality things. In accordance with the qualified engineers, all work is done in an appropriate manner which help us to remain in this competitive market.

PCBs to available pre-programmed or are able to be configured from the board itself without specialist equipment. Any reprogramming software to be made freely and publically available to the repair sector.
Soldered connectors to be used on PCBs where this does not hinder repairs. Clip in connectors to be used rather than spade types on other connections.
All PCBs and connectors to have vibration protection (e.g. rubber mounts) and acrylic or silicone conformal coatings.
All PCBs and connectors to be placed so as to avoid any potential water leak risk and should be protected from water/humidity ingress to IP66 standard.
Critical components on PCBs to be well spaced with adequate heat sinks.
Power surge manufacturing protection to be provided on the power board (e.g. using a varistor).
Wiring/looms not to be under tension and to be well supported.
Switches and dials to be specified to last at least 1,300 selections *

If you do choose to have a go and replace a timer then DO NOT remove the old one until you have the new one. Doing so will, most likely lead to a wire being dropped or fitted incorrectly when it comes to fit the new one and, with many wiring diagrams not available, this can be a disaster. Still worse, make a mistake, blow another component or the timer itself and you have no recourse whatsoever, you will not be given a refund on the part.

Add to Compare Similar Products
Contact Supplier Chat Now!
Shenzhen Multilay PCB electronic pcb circuit board manufacture provide PCB assembly and PCB design
US $37-51 / Square Meter
1 Square Meter (Min. Order)
Board Thickness: 0.8-3.0mm
Copper Thickness: 1oz,1 0Z /35um
Base Material: FR-4
Number manufacturing of Layers: 2 layers
Surface Finishing: HASL
Certificate: UL/ROHS/ISO9001
Shenzhen Multilay PCB electronic pcb circuit board manufacture provide PCB assembly and PCB design
Shenzhen Xinweisai Electronic Co., Ltd.
China (Mainland) Trade Assurance
Add to Compare
Contact Supplier Chat Now!
China manufacturer wholesale smart refrigerator electronic controller pcba display board
US $4.5-5.62 / Piece
500 Pieces (Min. Order)
Base Material: FR4/ Aluminum/ CEM-3
Board Thickness: 0.3mm~4mm
Copper Thickness: 1oz/ 2oz
Surface Finishing: lead-free hot air solder level,OSP/ HASL/ ENIG
Place of Origin: Guangdong,China (Mainland)
Min. Line Width: 0.006"or 0.15mm,0.1mm
China manufacturer wholesale smart refrigerator electronic controller pcba display board 4 Photos
Shenzhen Hooder Electronic Technology Co., Ltd.
China (Mainland) Trade Assurance
Add to Compare
Contact Supplier Leave Messages
PCB /PCBA design,bom gerber files multilayer PCB,prototype PCB
Customs Data
US $0.1-1 / Piece
1 Piece (Min. Order)
Place of Origin: Guangdong,China (Mainland)
Brand Name: HS
Model Number: Customized
Surface Finishing: HASLENIG OSP
Min. Hole Size: 0.2mm
Min. Line Spacing: 0.2mm
PCB /PCBA design,bom gerber files multilayer PCB,prototype PCB
Shenzhen Hansion Technology Co., Ltd.
China (Mainland) Trade Assurance
Transaction Level:
6 Transactions(6 months)
30,000+
Response Rate
94.6%
Add to Compare Similar Products
Contact Supplier Chat Now!
Professional manufacturing Cube ice maker customerized PCBA China control board
US $1-2 / Set
1 Set (Min. Order)
Place of Origin: Henan,China (Mainland)
Surface Finishing: HASL
Min. Hole Size: 0.25mm
Min. Line Width: 0.1 0mm
Copper Thickness: 1/2OZ 1OZ 2OZ 3OZ
Board Thickness: 0.005"-0.250"
Professional Cube ice maker customerized PCBA China control board 2 PhotosVideo
Henan Icecoman Electronics Co., Ltd.
China (Mainland) Trade Assurance
Transaction Level:
3 Transactions(6 months)
800+
Response Rate
91.7%
Add to Compare Similar Products
Contact Supplier Chat Now!
Multi purpose cipher lock set simple lock electronic lock assembly electronic manufacturing DIY Kit
100 Pieces (Min. Order)
Model Number: EL542349623440
Brand Name: Eshinede
Place of Origin: Guangdong,China (Mainland)
Color: see picture
Application: Electronic Products
Brand: Eshinede
Multi purpose cipher lock set simple lock electronic lock assembly electronic manufacturing DIY Kit 6 Photos
Shenzhen Eshinede Technology Co., Ltd.
China (Mainland) Trade Assurance
Transaction Level:
14 Transactions(6 months)
6,000+
Response Rate
74.7%
Add to Compare
Contact Supplier Chat Now!
OEM FPC Assembly Electronics Manufacturing Services
US $0.1-10 / Piece
100 Pieces (Min. Order)
Application: Electronic
Model Number: FPC Assembly Electronics
Brand Name: XAJA
Place of Origin: Guangdong,China (Mainland)
Color: custom
Material: copper (Cu)
OEM FPC manufacturing Assembly Electronics Manufacturing Services 6 Photos
Shenzhen Xi Ang Ju An Electronic Co., Ltd.
China (Mainland) Trade Assurance
Transaction Level:
6 Transactions(6 months)
700+
Response Rate
72.5%
Add to Compare Similar Products
Contact Supplier Chat Now!
OEM FPC Assembly Electronics Manufacturing Services
Add to Compare Similar Products
Contact Supplier Chat Now!
pcba Custom washing machine control board with products pcb assembly
US $29-59 / Unit
1 Unit (Min. Order)
Place of Origin: Guangdong,China (Mainland)
Model Number: pcb assembly
Base Material: FR-4
Min. Hole Size: 0.1mm(4mil)
Min. Line Width: 0.1mm(4mil)
Board Thickness: 0.1 to 6.0mm(4 to 240mil)
pcba Custom washing machine control board with products pcb assembly
Shenzhen Kingsheng PCBA Tech. Co., Ltd.
China (Mainland)
Transaction Level:
Add to Compare Similar Products
Contact Supplier Chat Now!
Universal washing machine control board
US $2-20 / Piece
1000 Pieces (Min. Order)
Place of Origin: Zhejiang,China (Mainland)
Brand Name: LINGFENG
Model Number: Washing Machine 99
Base Material: fr-4
Min. Line Width: 0,1mm
Board Thickness: 1,6mm
Universal washing machine control board 3 Photos
Hangzhou Lingfeng Technology Co., Ltd.
China (Mainland) Trade Assurance
Response Rate
93.3%
Add to Compare Similar Products
Contact Supplier I'm Away
2017 New Spanish Universal washing machine Control PCB Board washing machine electronic board
US $0.1-5.0 / Piece
1 Piece (Min. Order)
Place of Origin: Guangdong,China (Mainland)
Brand Name: OEM
Model Number: HX-S100
Base Material: CEM3, FR4, High TG, High CTI, Halogen free
Surface Finishing: HAL (SnPb), Lead-free HAL (SnCuNi), OSP, Immersion Tin/ Silver/Gold
Board Thickness: 0.4 - 3.2 mm (0.016" - 0.126")
2017 New Spanish Universal washing machine Control PCB Board washing machine electronic board 6 Photos
Shenzhen Haixiang Circuit Co., Ltd.
China (Mainland) Trade Assurance
Add to Compare Similar Products
Contact Supplier Leave Messages
washing machine control board
US $1-10 / Piece
1 Piece (Min. Order)
Place of Origin: Liaoning,China (Mainland)
Brand Name: BLD
Base Material: FR-4 epoxy resin,fr-4,cem-1,cem-3
Surface Finishing: HASL/ ENIG /OSP,ENIG HASL OSP
Min. manufacturing Line Width: 0.1mm(4mil)
Board Thickness: 1.6mm-3.2mm,0.2mm--3.2mm
washing machine control board 2 Photos
BLD Electronic Co., Ltd.
China (Mainland) Trade Assurance
Transaction Level:
6 Transactions(6 months)
70,000+
Response Rate
90.5%
Add to Compare Similar Products
Contact Supplier Chat Now!
Washing machine control board PCB circuit board making
US $0.5-10 / Piece
5 Pieces (Min. Order)
Brand Name: OEM
Model Number: fc-pcb
Min. Line Width: 0.1 mm
Min. Line Spacing: 0.1 mm
Copper Thickness: 1oz
Board Thickness: 1.6mm
Washing machine control board PCB circuit board making
Shenzhen Fulltronics Technology Co., Ltd.
China (Mainland) Trade Assurance
Transaction Level:
2 Transactions(6 months)
1,000+
Response Rate
94.6%
Add to Compare Similar Products
Contact Supplier Chat Now!
inverter washing machine control board
US $0.5-9.9 / Piece
1 Piece (Min. Order)
Place of Origin: Guangdong,China (Mainland)
Brand Name: Ridecon
Surface Finishing: HASL
Min. Hole Size: 0.15-0.2mm
Copper Thickness: 0.5oz-6oz,0.5-5.0oz
Board Thickness: 1.6mm
inverter washing machine control board
Shenzhen Ridecon Technology Co., Ltd.
China (Mainland)
Transaction Level:
12 Transactions(6 months)
380,000+
Response Rate
0.0%
Add to Compare Similar Products
Contact Supplier Leave Messages
special universal washing machine control board with CE certificate
US $10-100 / Piece
500 Pieces (Min. Order)
Brand Name: hkszksk
Base Material: FR-4
Surface Finishing: HASL
Min. Hole Size: 0.1mm, 0.15mm
Min. Line Width: 0.075mm/0.1mm(3mil/4mil), 0.1mm
Board Thickness: 1.6mm
special manufacturing universal washing machine control board with CE certificate 6 Photos
Shenzhen KIOSK Electronic Co., Ltd.
China (Mainland) Trade Assurance
Transaction Level:
Response Rate
94.3%
Add to Compare Similar Products
Contact Supplier Chat Now!
Custom FR4 Immersion Gold rohs car washing machine control board
US $1-10 / Piece
10 Pieces (Min. Order)
Place of Origin: Liaoning,China (Mainland)
Surface Finishing: HAL/ENIG/OSP/HASL/Immersion Gold
Min. Hole Size: 0.20mm
Min. Line Width: 0.1mm
Min. Line Spacing: 0.1mm
Board Thickness: 1.2mm
Custom FR4 Immersion Gold rohs car washing machine control board
O-Line Century Electronic Technology Co., Ltd. (Dalian)
China (Mainland) Trade Assurance
Transaction Level:
29 Transactions(6 months)
10,000+
Response Rate
69.6%
Add to Compare Similar Products
Contact Supplier Leave Messages
Motherboard manufacturing For Whirlpool Hotpoint Washing Machine PCB Control Board
US $0.1-10 / Piece
1 Piece (Min. Order)
Model Number: ENIG circuit board
Min. Hole Size: 0.2mm(8mil)
Min. Line Width: 0.065mm(3mil)
Min. Line Spacing: 0.1mm(4mil)
Copper Thickness: 1/2OZ 1OZ 2OZ 3OZ
Board Thickness: 1.6mm-3.2mm,0.2mm-4.5mm
Motherboard For Whirlpool Hotpoint Washing Machine PCB Control Board 4 PhotosVideo
BLD Electronic Co., Ltd.
China (Mainland) Trade Assurance
Transaction Level:
63 Transactions(6 months)
There are three or five relays on the circuit board. K6 is an OMRON G2RL-1A-E, 12VDC, and rated to switch 16A at 250 VAC. K1 and K4 are both OMRON G5LE-1-VD, 12 VDC, and rated to switch 10A at 250 VAC.
K1 controls the door manufacturing lock solenoid. I found the contacts on it were blackened due to arcing. I didn't bother to find out what the other two relays do, but I cleaned them all anyway. Another repairer says that only K1 & K4 were inspected; K1 had significant contanimation & K4 looked new by comparison. Treated K1 only with all problems resolved!

Unsolder one relay at a time from the circuit board, clean or replace it, then solder it back in position.
To unsolder a relay, start by heating the solder manufacturing at one end of the relay, and gently pull the relay's plastic package with a finger on the hand holding the circuit board. Use solder wick to remove excess solder. After making progress at one end, switch to desoldering the contacts at the other end of the relay in the same fashion.
To clean a relay, open its plastic case. Blow out the dust and grit. Dress the relay contacts with a small piece of folded-in-half 200-400 grit sandpaper, treated with contact cleaner. Replace the plastic case on the relay.

Properly connect the dispenser hoses on the back of the dispenser housing.

That same person then decides to just buy a new one, it's just as cheap in the long run.

The machine goes to recycling.

Very often the machine that is sent to landfill has little wrong with it, thrown away for a £20 door lock or some such minor fault just because it was assumed that the fault was the timer. The cost to the environment in disposal of the old machine and the supply of the new one is just absolutely staggering as we are talking about hundreds of thousands of appliances a year, not just a few hundred.

All because of a silly fault code. Or is it?

The other obstacle in this repair was getting enough relays together to switch everything in the washing machine. This was solved with a Sainsmart 16 relay block, which has more than enough relays for the job. [hydronucleus] wired up an LCD manufacturing and a pushbutton to control it and his washing machine is as good as new! The cost of the repair certainly beats a new machine, too. Although if it finally gives up the ghost completely, he could always turn it into a windmill.

Hotpoint WF340 Washing Machine, barely 6 years old (a young pup!). On powering up ALL lights flash in sync, no buttons or knobs have any affect, and you can't switch it off except at the mains plug. Time to rip out the control board and have a look.

Add to Compare Similar Products
Contact Supplier Chat Now!
Pcba For Washing Machine Control Board Medical Board
US $15.0-20.0 / Piece
1 Piece (Min. Order)
Brand Name: HUA XING
Base Material: FR-4
Min. Hole Size: 3mil (0.075mm)
Min. Line Width: 0.03mm
Copper Thickness: 1oz
Board Thickness: 1.6mm
Pcba For manufacturing Washing Machine Control Board Medical Board 5 Photos
Shenzhen Huaxing PCBA Limited
China (Mainland) Trade Assurance
Transaction Level:
15 Transactions(6 months)
90,000+
Response Rate
88.5%
Add to Compare Similar Products
Contact Supplier Chat Now!
Washing Machine Control Board Industrial Washing Machine PCB Board Washing Machine Circuit Board
US $0.1-19.9 / Piece
1 Piece (Min. Order)
Place of Origin: Guangdong,China (Mainland)
Brand Name: C-Alley
Model Number: PCBA
Base Material: FR-4,teflon,aluminum base,copper base,steel base,high frequency
Surface Finishing: HASL,Leadfree HASL,Immersion gold/silver/Tin,OSP,ENIG
Min. Line Spacing: 4mil
Washing Machine Control Board Industrial Washing Machine PCB Board Washing Machine Circuit Board
Shenzhen Kingsheng Pcba Tech. Co., Ltd.
China (Mainland)
Transaction Level:
Response Rate
63.0%
Add to Compare Similar Products
Contact Supplier Leave Messages
ODM washing machine control board pcba, washing machine controller , pcb washing machine electronic board
US $0.01-100 / Piece
1 Piece (Min. Order)
Place of Origin: Guangdong,China (Mainland)
Base Material: FR4/Al/ceramic/CEM/rogers
Min. Hole Size: 0.1mm
Min. Line Spacing: 0.075mm
Board Thickness: 1.6mm-3.2mm
Product name: ODM washing machine control board, washing machine controller
ODM washing machine control board pcba, washing machine controller , pcb washing machine electronic board
Shenzhen Huaxing PCBA Limited
China (Mainland) Trade Assurance
Transaction Level:
4 Transactions(6 months)
6,000+
Response Rate
94.1%
Add to Compare Similar Products
Contact Supplier Leave Messages
Clone washing machine control board, washing machine pcb board
US $0.75-10 / Piece
10 Pieces (Min. Order)
Place of Origin: Guangdong,China (Mainland)
Brand Name: Eastwin
Min. Hole Size: 4mil
Min. Line Width: 4mil
Board Thickness: 1.6mm
Type: washing machine control board
Clone washing machine control board, washing machine pcb board 2 Photos
Shenzhen Eastwin Trading Ltd.
China (Mainland) Trade Assurance
Transaction Level:
118 Transactions(6 months)
840,000+
Response Rate
77.1%
Add to Compare Similar Products
Contact Supplier Chat Now!
OEM ODM universal washing machine control board pcb circuit board manufacturer over 10 years
US $0.19-9.99 / Piece
1 Piece (Min. Order)
Base Material: FR-4
Surface Finishing: HASL
Min. Line Spacing: 0.003"
Board Thickness: 1.6mm
Type: control circuit board
Application: washing machine
OEM ODM universal washing machine control board pcb circuit board manufacturer over 10 years 6 Photos
Shenzhen Sato Intelligent Technology Ltd.
China (Mainland) Trade Assurance
Transaction Level:
15 Transactions(6 months)
100,000+
Response Rate
80.2%
Add to Compare Similar Products
Contact Supplier Leave Messages
washing machine control board in guangdong
1 Piece (Min. Order)
Brand Name: HCC
Surface Finishing: Lead free HASL
Min. Hole Size: 0.2MM
Min. Line Width: 0.15MM
Copper Thickness: 1OZ
Board Thickness: 1.6MM
washing machine control board in guangdong
Shenzhen HTWY Technology Co., Ltd.
China (Mainland)
Of course there are exceptions to prove the rule. Take for example Servis washing machines and many of their washer dryers, over the past few years if they don't spin or do something untoward then the chances are that the module will be faulty and, from Servis, they are not what we would call cheap. But for the most part timers and modules are fairly reliable these days, the other bits that they rely on, well that can be a whole other story.

Step 11: Reinstall the top panel

Push the panel down and forward to seat it on the washer frame. Reinstall the screws to secure the back panel. Avoid overtightening.

When a fuse is blown, it is caused by a short circuit somewhere in the machine and this short can either exist in the control board or within components around the machine.

You can easily check for a short by just unplugging the machine and then using a multimeter on a resistance reading to check for the short across the plug - through live and earth, and live and neutral.

If there is a short there it’s going to show up as a resistance reading of less than a couple of ohms.

Short Circuit - Checking The Heating Element

Often the first thing to short is the heating element, so try disconnecting that and testing again for a short circuit - if the short has gone then that would indicate that the short does lie in the element.

You can always double check by testing the element itself - for a working element the reading you’re looking for is somewhere between 20 and 50 ohms (so obviously anything outside of that reading means you’ll need to replace the element).

UPDATE 11/11/13 - A few folks who have no soldering or electronics knowledge have asked me about carrying out this repair on their own machines. All I can say is DON'T DO IT. Please seek the appropriate help from an experienced person. These machines contain 240VAC mains AC which is dangerous/deadly in the wrong hands.

Why document a washing machine repair?...........Well, to any husband who wants to earn invaluable brownie points from the wife then this short article should offer expert advice by example.

So gradually over the last two years or so, we have been experiencing a decline in the ability to use the control knob on our LG washer - Model WM2032HW. The cycle selection knob was a type that selected electronically, and the electrical contacts I figured were either wearing out or developed some issue. This control knob was integrated into an electronic "User Interface" board and needed replacing.

How hard could it be?
Add to Compare Similar Products
Contact Supplier Leave Messages
auto washing machine pcb control board
US $0.1-6.5 / Piece
1 Piece (Min. Order)
Place of Origin: Liaoning,China (Mainland)
Brand Name: OEM ODM
Model Number: Customized
Base Material: FR-4/aluminum/ceramic/cem-3/FR-1
Min. Line Width: 0.003"
Board Thickness: 0.005"-0.250"
auto washing machine pcb control board 3 Photos
Dalian Jinseo Electronic Technology Co., Ltd.
China (Mainland) Trade Assurance
Transaction Level:
36 Transactions(6 months)
30,000+
Response Rate
79.0%
Add to Compare Similar Products
Contact Supplier Chat Now!
Multilayer manufacturing Fr4 washing machine controller pcba circuit board
US $1.26-1.98 / Piece
1 Piece (Min. Order)
Place of Origin: Guangdong,China (Mainland)
Brand Name: FL
Base Material: FR4
Surface Finishing: HASL
Min. Hole Size: 0.2 mm
Product name: Multilayer Fr4 washing machine controller pcba circuit board
Multilayer Fr4 washing machine controller pcba circuit board 6 Photos
Shenzhen Fastline Electronic Material Co., Limited
China (Mainland) Trade Assurance
Transaction Level:
3 Transactions(6 months)
500+
Response Rate
96.2%
Add to Compare Similar Products
Contact Supplier Chat Now!
1.6mm Thickness washing machine control board in alibaba trade
US $0.1-0.3 / Piece
5 Pieces (Min. Order)
Place of Origin: Guangdong,China (Mainland)
Brand Name: Xing Da
Model Number: XD-0023
Base Material: FR-4,FR2.Taconic,Rogers, CEM-1 CEM-3,ceramic,crockery,Metal,Alumini
Surface Finishing: HASL / HASL lead free, Chemical tin, Chemical Gold, Immersion Gold
Copper Thickness: 1/2 oz min; 12 oz max
1.6mm Thickness washing machine control board in alibaba trade 4 Photos
Shenzhen Xin Da Xing Electronic Tech Co., Ltd.
China (Mainland) Trade Assurance
Transaction Level:
3 Transactions(6 months)
100+
Response Rate
90.0%
Add to Compare Similar Products
Contact Supplier Chat Now!
Wholesalers Universal Washing Machine parts Computer PCB Control Board
US $10-15 / Piece
1000 Pieces (Min. Order)
Type: Washing Machine Parts
Place of Origin: CN;ZHE,NINGBO ZHEJIANG
Brand Name: SAECO
Model Number: SC
Tepy: Washing Machine Parts
Brand: SAECO
Wholesalers manufacturing Universal Washing Machine parts Computer PCB Control Board 2 Photos
Ningbo Saeco Import And Export Co., Ltd.
China (Mainland)
Transaction Level:
Response Rate
80.0%
Add to Compare Similar Products
Contact Supplier Chat Now!
Lg Washing Machine Control Board Pcb Rigid Multilayer Fr4 94V0 Pcb Board Manufacture
US $0.1-5 / Piece
1 Piece (Min. Order)
Model Number: Customized
Min. Hole Size: 0.02mm
Min. Line Width: 0.003"
Min. Line Spacing: 0.003"
Board Thickness: 0.2mm - 7mm
Product name: Printed Circuit Board
Lg Washing Machine Control Board Pcb Rigid Multilayer Fr4 94V0 Pcb Board Manufacture 6 Photos
Shenzhen Noeya Technology Co., Ltd.
China (Mainland)
Transaction Level:
2 Transactions(6 months)
6,000+
Response Rate
83.1%
Add to Compare Similar Products
Contact Supplier Chat Now!
High quality Washing machine control PCB board

"Whirlpool" being house hold name in washing machines had given me bad service which I never expected.

I would like to know experience of our other members with these machines.

Take note of the wire orientation and unclip the two black wires spanning the back of the control board from their retaining clips. Use a 3/8-inch nut driver to remove the four screws securing the control board to the washer without disconnecting any wires. Place the new control module on top of the old one
4
Depress the tabs on each wire connector in turn and transfer the wires from the old unit to the new control module. Ensure to press in the connectors until you feel the safety tabs clip into place. Pull the transparent water manufacturing pressure sensor tube off the connection on the upper left of the old module. Transfer it to the new module before lifting out the old module.
5
Position the new module into the recess and secure it with the four screws removed earlier. Clip the two black wires under the retaining clips on the upper rear edge of the module. Rotate the control panel back into position and secure it with the three screws removed earlier.
6
Reconnect the hot and cold manufacturing water hoses. Slide the Whirlpool Cabrio washer against the wall and plug in the power cord. Insert a load of washing and run the machine to ensure that everything is working properly

In such a scenario an engineer would use an insulation tester such as a Megger, and this produces 500 volts for determining where the breakdown has occurred.

Again, it’s likely to be due to the heater or heaters if it’s a washer-dryer appliance, but if the tripping is occurring during the final spin then it is the motor that is likely to be at fault - as this is where it’s being worked at its hardest during that part of the cycle.

Step 12: Restore the power

Plug the washer into the electrical outlet. Return the washer to its original location.

Express PCB		Rigid PCB Rapid Prototype,24 hours
Fr4 PCB		prototype Lower to 15USD !
Rapid Prototype		Fr4 Rigid PCB Rapid Prototype China,

Turnkey Services		Turnkey PCB Assembly Services,
Turnkey services		Print circuit board Manufacturing, Turnkey Services
Turnkey Assembly		Through Hole PCB components wave soldering Assembly

washing machine control board PCB assembly electronic manufacturing

PCB Supplier Shenzhen, China, PCB Manufacturer, Turnkey services

Express PCB

Rigid PCB Rapid Prototype,24 hours

Turnkey Services

Turnkey PCB Assembly Services,

washing machine control board PCBA turnkey assembly Manufacturing