microwave oven control board PCB assembly electronic manufacturing

microwave oven control board PCBA turnkey assembly Manufacturing

microwave oven control board PCBA turnkey assembly Manufacturing
This control board is designed for microwave oven use. It comes with an LED display for convenient operation. Made of rugged construction, this fantastic control board guarantees durability of your microwave ovens.

t powers up okay, but no hum, and no heat.

I've checked out YouTube, and didn't learn anything new there.

If the display is counting down when you press start and stops counting down when you open the microwave door your control panel is at least half way working and part of your door interlock is working.
does the internal lamp light and fan spin and turntable motor work while the cook time is counting down after you press start-if not you need to pull the board and look for blown tracks on the underside and replace your oven lamp.

ability of microwave energy to cook food was discovered in 1945 by an engineer in the Raytheon Company. Percy L. Spencer (1894–1979) was inspecting a magnetron at work. (During World War II [1939–45], the magnetron tube had been used in radar systems.) Spencer discovered that a chocolate bar in his pocket had melted even though he had not felt any heat from the magnetron. Next, Spencer exposed some popcorn kernels to the magnetron, and, sure enough, the kernels popped.

Spencer discovered that, when confined to a metal enclosure, microwaves produced by the magnetron tube excite certain molecules, such as water found in food, causing the food to increase in temperature and eventually get cooked. The first microwave oven, called Radarange, developed by Spencer and the Raytheon Company, was about the size of a refrigerator. It was used in commercial food preparations, and cost about $3,000. In 1955, slightly smaller versions were sold as home appliances, but they were still expensive, and people were not sure they wanted an appliance that they thought emitted "radar waves."

Either all indicator lights are lit, or no display at all, as though the panel is "dead." (In the case of no display or a "dead" panel, ensure that the low-voltage control transformer is supplying the appropriate voltages. Or if the low-voltage transformer is part of the control board, check for the appropriate input (primary) voltage to the panel before judging it to be defective.)

SYMPTOM:

Inspect the area of the ribbon tail that slips into the board connector for cleanliness, for sections where the silver has worn off, or for evidence of scratching or hairline cracks. If cleaning is necessary, do so using an alcohol or freon-based contact cleaner. Do not use silicone-based cleaners or lubricants. Gently rubbing the terminals with a soft pencil eraser will also clean them, but, a word of caution: test the effect of the eraser on a non-essential area first! Erasers have been known to clean the silver right off of the ribbon. In many cases, the problem can be resolved simply by evenly trimming off about 1/16-inch from the tail of the ribbon, leaving fresh new terminals to assure good electrical contact with the circuit board connector.

A close examination of the front of the membrane touch panel may reveal dents or deep scratches that may be creating a short in certain touch pads. Also, brightening or dimming of the panel-display colons while pressing certain pads is a reasonably good indication that a signal is getting through to the control panel. In that case, try replacing control panel.

I had a intermittently dim display clock on a JennAir W256B. I recapped the ERC board (Y04100264) with high temp capacitors (found some 135 C caps!) but the problem wasn’t fixed. I tracked it down to a bad solder joint on the transformer/relay board (Y04100260) in the back of the oven. The transformer on this oven provides 21 VAC and 4 VAC to the ERC board. Resistance of the 4 VAC was about 1.1 and the 21 VAC was about 5.0. Flexing the board and the 4 VAC would open circuit. I refluxed all the solder joints on the board and the oven now works properly, with beefier capacitors!

When I called Samsung, the phone rep said there was no recall on my microwave, and there was nothing she could offer other than to schedule a repair appointment at full price.

I calmly asked if there was anything at all Samsung could do to ‘work with me,’ since the web was a flurry with so many other customer stories with the same problem.

The manager took a few minutes to do her own research, and she returned to continue our ‘negotiations.’

She said my unit wasn’t on their recall list of microwaves.
(There’s a recall list of other Samsung microwaves in trouble?!)

But…
(Let the silence here work in your favor.)

She could offer me a free one-time repair visit, which included parts and labor.
YES!!

Some additional symptoms that indicate a defective key or touch panel are: 1) Only certain pads or groups of pads will respond while others will not. 2) Touching a pad produces a string of characters on the display. 3) One character remains constantly on the display, and disconnecting the ribbon connector from the control board removes it. 4) Some or all pads must be pressed hard or pressed several times to produce a response. 5) The number displayed is different from the one pressed (i.e., press the "5" pad and a "9" appears on the display).

Lift the control panel and unhook the bot-tom bracket from the slot in the chassis.Rotate the panel so you can access theelectronic control board wiring.7.Disconnect wire connectors P2 throughP4 from the electronic control board.8.Disconnect the red and brown wires fromterminals of relay 4903.9.Remove the green ground wire screw andremove the control pane

Besides the substitution of a known good panel, the next most certain method of isolating this type of problem is to make continuity checks through each of the touch unit circuits with an ohmmeter. However, without specific data on the matrix configuration of the unit to be tested, this is virtually impossible. Therefore, Appendix I contains many of the common matrix diagrams, listed by make and model number, and instructions on how they are tested.

Either a continuous beep or buzz; or none at all.

SYMPTOM:

The timer buttons remain depressed, thus holding the oven in a continuous cook mode. Litton and some other models use individual pushbuttons that are soldered on to the printed circuit board. These buttons may stick in the depressed position due to inadequate clearance through the cutouts in the timer faceplate. In these cases, the circuit board position may be adjusted to equally center the buttons in their openings, ensuring that the cutouts and buttons are free of grease and residue. In more extreme cases, the size of the hole can be increased by filing the sides of the obstructing cutouts with a small, fine file (the circuit board must be removed first). Then clean any metal filings from the casting and re-assemble the timer, making sure that the timer board is centered so that the buttons operate freely.

If the lamp lights,the turntable motor and fan works but no supply to the hv tx you need to look at the door interlock micro switches-they should be closed with the door shut and they work with the control board in such a way that your oven cannot be used in cook mode with the door open.
Failure of the primary or secondary interlock will cause no supply to your hv tx-there is a third interlock called the Monitor Interlock which monitors the status of the other interlocks such that closing either primary or secondary interlock will instantly blow fuses with the microwave oven door open so check these switches with your microwave disconnected from the mains supply.
Chances are when you find the micro switch responsible a replacement will get things going again as long as theres no other fault with the hv section of the microwave....

I unpluged the two wires going into the transformer, and hooked up my DMM leads, and I'm getting nothing.

If the microwave display is not working the main control board is most likely defective and will need to be replaced.

Fantastic service with fantastic results! My swing gate opener control failed to respond. Power was to the board and no apparent blown fuses. Our local gate service company was sure they could trouble shoot and repair so I scheduled a service call. The technician failed to find the issue but we did notice possible insect infestation with some potential arcing within the circuitry of the back of the board when removed from the control housing. Time to replace the board? I received a call back from the service company that the board was obsolete and I nice big quote for a new control was attached. I spent hours looking for a replacement board with no success. During the search I learned about FixYourBoard.com. I called and pictures of the control board were requested. The techs reviewed and felt they could repair. The board was sent in and back to me within two weeks total. I reinstalled the board and the swing gate has never worked better!! Thanks to all the professionals
Digital touch control panel microwave oven, metallic silv...
China Digital touch control panel microwave oven, metallic silver housing defrost and grill model
1
US$ 42 - 45 / Piece
1288 Pieces (Min. Order)
Freight Cost Available
Supplier Details
Inquire Now Add this product to Inquiry Basket
Membrane Graphic Overlay Control Panel with LED Window an...
China Membrane Graphic Overlay Control Panel with LED Window and Embossed Button
8
US$ 3 - 4 / Piece
500 Pieces (Min. Order)
Supplier Details
Inquire Now Add this product to Inquiry Basket
Panasonic microwave oven inverter board F606YM300BP
China Panasonic microwave oven inverter board F606YM300BP
8
US$ 10 - 30 / Piece
1 Piece (Min. Order)
Freight Cost Available
Supplier Details
Inquire Now Add this product to Inquiry Basket
Portable Appliance Microwave Oven with Digital Control
China Portable Appliance Microwave Oven with Digital Control
1
Supplier Details
Inquire Now Add this product to Inquiry Basket
Hyxion microwave ovens 2.2 Cu ft. digital touch pad contr...
China Hyxion microwave ovens 2.2 Cu ft. digital touch pad control
2
US$ 1 - 499 / Piece
414 Pieces (Min. Order)
Supplier Details
Inquire Now Add this product to Inquiry Basket
LCD digital electronic control electric oven with digital...
China LCD digital electronic control electric oven with digital touch screen function 23L
1
US$ 29 - 33 / Piece
500 Pieces (Min. Order)
Freight Cost Available
Supplier Details
Inquire Now Add this product to Inquiry Basket
Toaster Oven with 16L Capacity/100 to 250°C Temperature C...
China Toaster Oven with 16L Capacity/100 to 250°C Temperature Control Powder-coated Steel Housing
2
US$ 17.5 - 18 / Unit
1428 Units (Min. Order)
Freight Cost Available
Supplier Details
Inquire Now Add this product to Inquiry Basket
BIOBASE Auto PID Control Vacuum Drying Oven
China BIOBASE Auto PID Control Vacuum Drying Oven
2
US$ 280 - 300 / Unit
1 Unit (Min. Order)
Freight Cost Available
Supplier Details
Inquire Now Add this product to Inquiry Basket
Multifunction Electric Oven with Touch Control System
China Multifunction Electric Oven with Touch Control System
1
81 Units (Min. Order)
Supplier Details
Inquire Now Add this product to Inquiry Basket
8 trays single door single control rice steam oven
China 8 trays single door single control rice steam oven
1
100 Sets (Min. Order)
Supplier Details
Inquire Now Add this product to Inquiry Basket
Panasonic microwave oven inverter board F606YM301BP
China Panasonic microwave oven inverter board F606YM301BP
8
US$ 10 - 30 / Piece
1 Piece (Min. Order)
Freight Cost Available
Supplier Details
Inquire Now Add this product to Inquiry Basket
20L electric manual controls white plastic housing microw...
China 20L electric manual controls white plastic housing microwave oven
1
US$ 34 - 35 / Piece
1290 Pieces (Min. Order)
Freight Cost Available
Supplier Details
Inquire Now Add this product to Inquiry Basket
Hyxion microwave ovens 1.6 Cu ft. digital touch pad contr...
China Hyxion microwave ovens 1.6 Cu ft. digital touch pad control
PCB PCBA design provider PCB assembly custom circuit boar...
China PCB PCBA design provider PCB assembly custom circuit board assembly
1
US$ 1 / Piece
1 Piece (Min. Order)
Supplier Details
Inquire Now Add this product to Inquiry Basket
PCB & PCBA OEM Manufacturer, Electronic Circuit Board PCB... New
China PCB & PCBA OEM Manufacturer, Electronic Circuit Board PCB assemblies PCBA Factory New
5
US$ 80 / Piece
20 Pieces (Min. Order)
Supplier Details
Inquire Now Add this product to Inquiry Basket
2 Layer Electronic Board Rigid PCB, Manufacturing Custom-... New
China 2 Layer Electronic Board Rigid PCB, Manufacturing Custom-made PCBA
8
US$ 65 / Square Meter
1 Square Meter (Min. Order)
Freight Cost Available
Supplier Details
Inquire Now Add this product to Inquiry Basket
Electronic circuit board, PCBA manufacturing
China Electronic circuit board, PCBA manufacturing
3
US$ 1.6 - 1.8 / Piece
1 Piece (Min. Order)
Freight Cost Available
Supplier Details
Inquire Now Add this product to Inquiry Basket
Electronic PCB manufacturing PCBA
China Electronic PCB manufacturing PCBA
1
US$ 0.1 / Piece
500 Pieces (Min. Order)
Supplier Details
Inquire Now Add this product to Inquiry Basket
Custom Electronic PCB Manufacturing Power Board 14.8V Rec...
China Custom Electronic PCB Manufacturing Power Board 14.8V Rechargeable Battery PCM
4
US$ 4.99 - 5.23 / Piece
10 Pieces (Min. Order)
Freight Cost Available
Supplier Details
Inquire Now Add this product to Inquiry Basket
PCB & PCBA OEM Manufacturer Electronic Circuit Board Elec...
China PCB & PCBA OEM Manufacturer Electronic Circuit Board Electronic PCBA Manufacturer
1
US$ 1.5 - 2 / Piece
1 Piece (Min. Order)
Supplier Details
Inquire Now Add this product to Inquiry Basket
Supply OEM Smart Robot PCB and PCBA Fabrication
China Supply OEM Smart Robot PCB and PCBA Fabrication
4
US$ 0.1 - 1 / Piece
1 Piece (Min. Order)
Freight Cost Available
Supplier Details
Inquire Now Add this product to Inquiry Basket
Contract Manufacturing Services PCBA, One -stop EMS Servi...
China Contract Manufacturing Services PCBA, One -stop EMS Services Provider
8
US$ 0.65 - 36.9 / Piece
1 Piece (Min. Order)
Supplier Details
Inquire Now Add this product to Inquiry Basket
Impedance control PCB assembly, electronic PCBA manufactu... New
China Impedance control PCB assembly, electronic PCBA manufacturing
5
US$ 1 / Piece
1 Piece (Min. Order)
Supplier Details
Inquire Now Add this product to Inquiry Basket
PCB Manufacturing Service with Turnkey Contract for Elect...
China PCB Manufacturing Service with Turnkey Contract for Electronic Product Control Unit
5
1 Piece (Min. Order)
Supplier Details
Inquire Now Add this product to Inquiry Basket
Mini electronic PCB assembly with 0201 components, EMS an...
China Mini electronic PCB assembly with 0201 components, EMS and turnkey service
3
US$ 5 - 10 / Piece
100 Pieces (Min. Order)
Freight Cost Available
Supplier Details
Inquire Now Add this product to Inquiry Basket
Electronic Products OEM Service PCB Assembly, Low Volume ...
China Electronic Products OEM Service PCB Assembly, Low Volume Services
4
US$ 80 / Piece
20 Pieces (Min. Order)
Supplier Details
Inquire Now Add this product to Inquiry Basket
Custom-made Electronic Contract Manufacturing with PCBA a...
Taiwan Custom-made Electronic Contract Manufacturing with PCBA and PCB Layout for Motherboards
1
Supplier Details
Inquire Now Add this product to Inquiry Basket
PCB Manufacturing & PCB Assembly Services for Counter
China PCB Manufacturing & PCB Assembly Services for Counter
8
US$ 0.1 - 5 / Piece
1 Piece (Min. Order)
Freight Cost Available
Supplier Details
Inquire Now Add this product to Inquiry Basket
PCB Manufacturing & PCB Assembly Services for UPS Power
China PCB Manufacturing & PCB Assembly Services for UPS Power
8
US$ 1 - 10 / Piece
1 Piece (Min. Order)
Freight Cost Available
Supplier Details
Inquire Now Add this product to Inquiry Basket
Low Cost PCBA for Electronic Power Bank, 100% E-test SMT/...
China Low Cost PCBA for Electronic Power Bank, 100% E-test SMT/DIP Manufacturer
2
US$ 1 / Piece
1 Piece (Min. Order)
Supplier Details
Inquire Now Add this product to Inquiry Basket
OEM PCBA Assembling Electronic Manufacturing Maker
China OEM PCBA Assembling Electronic Manufacturing Maker
7
US$ 0.1 / Piece
1 Piece (Min. Order)
Supplier Details
Inquire Now Add this product to Inquiry Basket
Electronic PCBA, Conforms to the Quality of UL/RoHS/SGS C...
China Electronic PCBA, Conforms to the Quality of UL/RoHS/SGS Certificate
5
US$ 10 - 20 / Set
1000 Sets (Min. Order)
Supplier Details
Inquire Now Add this product to Inquiry Basket
Medical electronic circuit boards medical electronic PCBA
China Medical electronic circuit boards medical electronic PCBA
1
US$ 0.008 / Piece
1 Piece (Min. Order)
Freight Cost Available
Supplier Details
Inquire Now Add this product to Inquiry Basket
PCBA Electronic Card Service Manufacturer form Shenzhen C...
China PCBA Electronic Card Service Manufacturer form Shenzhen China Supplier
7
US$ 1 / Piece
1 Piece (Min. Order)
Supplier Details
Inquire Now Add this product to Inquiry Basket
OEM/ODM electronic pcba services for monititor in Shenzhe...
China OEM/ODM electronic pcba services for monititor in Shenzhen China
The first one is obvious. You need an old microwave. Preferably one that's being thrown out because it's stopped cooking like it should. One from a yard sale or the local thrift store will work. Why use a second hand device you ask? Well first of all it will be much less expensive. Second, it keeps part of it out of a land fill. Lot's of people don't recycle those and it's a crying shame. There are a lot of useful parts in them. All kind of things like microswitches, screws and other hardware, and let's not forget the emitter it's self. Then there's that huge step-up transformer. There's a chance that the emitter or the transformer are damaged in most cases. The switching device is usually still workable. That's just what it is too. A programmable switch.

The tools you'll need are as follows:

1. A Soldering iron and solder
2. Wire cutter/stripper
3. Various screw drivers (depending on what they put it together with. It varies between makes and models.
4. A Dremel or some other means of cutting metal and plastic.
5. A drill or you could just use a drill bit in the Dremel
6. Safety glasses (You won't be able to do this if you can't see because something got in your eye. It happens, just trust me and use a pair.)
7. A multimeter (preferably digital because their more accurate.)
8. A power cord (the heavier, the better.)
9. Some outlets and boxes (I used panel mount outlets that I got from Home Depot)
10. A hot glue gun (This is optional depending on how you plan to build it)
11. Electrical tape

All I did was plug mine back in, the stupid SE code came back on, and I took my hair dryer, using high heat, waved it back and forth across the keypad panel while sort of massaging the keypad. I also, for good measure, aimed the hairdryer to the underneath side of the keypad. I did it for at least a minute or two, or until my fingers got too hot to massage! Then, like magic, I got a “enter time of day” display on the keypad. I don’t recall if it came up by itself or if I hit the cancel button, but I think it came up by itself. I entered the time following the display instructions, and it started working again!

Here is my disclaimer – I have had to repeat the process twice so far. The unit works for about 20 minutes, then it asks for the time of day again. I am hoping that after a few times it will simply be ok. I believe the reason our unit has this issue is due to steam from the cooktop below. We have a large garden and I have been doing a lot of canning. So I am hopeful that by continuing to use the hair dryer method, it will eventually dry out and be totally fine.

I have a NuWave oven thing that is basically like a plug-in hot plate that I will use for anything that produces steam in the future! Too bad they make microwaves that really can’t be used above the range! Duh! When this one finally fails, I will do my homework to find a better made microwave.

3. Do Your Research
When I spoke to ‘the manager,’ I felt prepared, because I had done my homework.
And the fact I was not alone with this particular Samsung failure didn’t hurt.
Also, I tried to act like the two of us were working together on my problem.
(It’s a slight attitude tweak, and it can make all the difference…)

1 Piece (Min. Order)
Freight Cost Available
Supplier Details
Inquire Now Add this product to Inquiry Basket
Manufacture electronic PCBA assembly, PCB PCBA factory
China Manufacture electronic PCBA assembly, PCB PCBA factory
1
US$ 1 - 500 / Piece
1 Piece (Min. Order)
Supplier Details
Inquire Now Add this product to Inquiry Basket
Manufacture electronic PCBA assembly, PCB PCBA factory
China Manufacture electronic PCBA assembly, PCB PCBA factory
4
US$ 1 - 500 / Piece
1 Piece (Min. Order)
Supplier Details
Inquire Now Add this product to Inquiry Basket
Multilayer PCBA Electronic Manufacturing Service
China Multilayer PCBA Electronic Manufacturing Service
2
US$ 1 - 10 / Piece
1 Piece (Min. Order)
Supplier Details
Inquire Now Add this product to Inquiry Basket
Quadcopter PCBA Electronic Manufacturing Service
China Quadcopter PCBA Electronic Manufacturing Service
1
US$ 1 - 10 / Piece
1 Piece (Min. Order)
Supplier Details
Inquire Now Add this product to Inquiry Basket
Electronic manufacturing service PCB assembly, component ...
China Electronic manufacturing service PCB assembly, component procurement
1
US$ 0.5 - 5 / Set
1 Set (Min. Order)
Supplier Details
Inquire Now Add this product to Inquiry Basket
PCBA electronic manufacturing
China PCBA electronic manufacturing
5
US$ 0.1 / Piece
1 Piece (Min. Order)
Freight Cost Available
Supplier Details
Inquire Now Add this product to Inquiry Basket
PCB Electronic Manufacturing Services
China PCB Electronic Manufacturing Services
4
US$ 5.6 - 7.7 / Piece
100 Pieces (Min. Order)
Freight Cost Available
Supplier Details
Inquire Now Add this product to Inquiry Basket
PCB & PCBA OEM Manufacturer Electronic Circuit Board
China PCB & PCBA OEM Manufacturer Electronic Circuit Board
3
US$ 80 / Piece
20 Pieces (Min. Order)
Supplier Details
Inquire Now Add this product to Inquiry Basket
Manufacture OEM Electronic Circuit board & aluminum PCB f...
China Manufacture OEM Electronic Circuit board & aluminum PCB for led PCBA OEM
1
US$ 1 - 500 / Piece
1 Piece (Min. Order)
Supplier Details
Inquire Now Add this product to Inquiry Basket
Electronic Product Manufacturing house, pcb assembly with...
China Electronic Product Manufacturing house, pcb assembly with SMT/DIP company
6
US$ 5 / Piece
10 Pieces (Min. Order)
Supplier Details
Inquire Now Add this product to Inquiry Basket
PCB Manufacturing & PCB Assembly Services for Electronic ...
China PCB Manufacturing & PCB Assembly Services for Electronic Timer
8
US$ 1 - 50 / Piece
1 Piece (Min. Order)
Freight Cost Available
Supplier Details
Inquire Now Add this product to Inquiry Basket
PCB Manufacturing & PCB Assembly Services for Electronic ...
China PCB Manufacturing & PCB Assembly Services for Electronic Scale
8
US$ 1 - 50 / Piece
1 Piece (Min. Order)
Freight Cost Available
Supplier Details
Inquire Now Add this product to Inquiry Basket
Manufacture OEM Electronic Circuit board & aluminum PCB f...
China Manufacture OEM Electronic Circuit board & aluminum PCB for led PCBA OEM
4
US$ 1 - 500 / Piece
1 Piece (Min. Order)
Supplier Details
Inquire Now Add this product to Inquiry Basket
Electronic manufacturing service of PCB and PCBA
China Electronic manufacturing service of PCB and PCBA
8
US$ 1.32 / Piece
5 Pieces (Min. Order)
Supplier Details
Inquire Now Add this product to Inquiry Basket
Electronic Manufacturing Assembly Service for Motor Contr...
China Electronic Manufacturing Assembly Service for Motor Control
8
US$ 0.1 - 100 / Piece
1 Piece (Min. Order)
Supplier Details
Inquire Now Add this product to Inquiry Basket
Electronic Manufacturing Assembly Service for LED Lightin...
China Electronic Manufacturing Assembly Service for LED Lighting Product
8
US$ 0.1 - 100 / Piece
1 Piece (Min. Order)
Supplier Details
Inquire Now Add this product to Inquiry Basket
Electronic Manufacturing Assembly Service for Bluetooth S...
China Electronic Manufacturing Assembly Service for Bluetooth Speakers
8
US$ 0.1 - 100 / Piece
1 Piece (Min. Order)
Supplier Details
Inquire Now Add this product to Inquiry Basket
Electronic Manufacturing for Traffic and Industrial and M...
China Electronic Manufacturing for Traffic and Industrial and More Systems
1
100 Pieces (Min. Order)
Supplier Details
Inquire Now Add this product to Inquiry Basket
Electronic manufacturing services for water controller bo...
China Electronic manufacturing services for water controller board
1
US$ 0.2 - 11 / Piece
100 Pieces (Min. Order)
Supplier Details
Inquire Now Add this product to Inquiry Basket
Electronic manufacturing service of electronic assembly New
China Electronic manufacturing service of electronic assembly
8
US$ 1.5 / Piece
5 Pieces (Min. Order)
Supplier Details
Inquire Now Add this product to Inquiry Basket
Electronic Contract Manufacturing Service
China Electronic Contract Manufacturing Service
1
US$ 3.63 - 4.22 / Piece
100 Pieces (Min. Order)
Freight Cost Available
Supplier Details
Inquire Now Add this product to Inquiry Basket
Turnkey electronic design and manufacturing
Supplier Details
Inquire Now Add this product to Inquiry Basket
Digital temperature control pizza oven baking oven digita...
China Digital temperature control pizza oven baking oven digital home oven with LED display
1
US$ 27 - 32 / Piece
500 Pieces (Min. Order)
Freight Cost Available
Supplier Details
Inquire Now Add this product to Inquiry Basket
25L Home appliances digital oven digital electric convect...
China 25L Home appliances digital oven digital electric convection oven with Electric Control Panel
1
US$ 23 - 27 / Piece
500 Pieces (Min. Order)
Freight Cost Available
Supplier Details
Inquire Now Add this product to Inquiry Basket
28L digital oven, Electric Control Panel, Digital toaster...
China 28L digital oven, Electric Control Panel, Digital toaster oven with LED display
1
US$ 30 - 40 / Piece
600 Pieces (Min. Order)
Freight Cost Available
Supplier Details
Inquire Now Add this product to Inquiry Basket
28L digital oven, Electric Control Panel, Digital toaster...
China 28L digital oven, Electric Control Panel, Digital toaster oven with LED display
1
US$ 30 - 40 / Piece
600 Pieces (Min. Order)
Freight Cost Available
Supplier Details
Inquire Now Add this product to Inquiry Basket
Digital electric toaster oven 25L digital toaster oven wi...
China Digital electric toaster oven 25L digital toaster oven with digital timer control
Self-Diagnosis: As digital circuitry becomes more sophisticated, more manufacturers are providing a self-diagnostic test sequence that can be programmed into the control unit. The control panel responds, in most cases, with a code that indicates the likely problem area. For the respective test and related codes for any of the various models that offer this feature, consult the appropriate service manual or contact the manufacturer.

So I've taken apart an old microwave oven with a touch-sensitive LCD screen. I understand that I could die from playing around with this, so I've disconnected the high-voltage transformer and the magnetron. I'm also not going to remove any of the safety switches like the door switch. My question is, how is the microwave controlled? I'm thinking there is a computer chip somewhere in the circuit, and I'm looking to replace it with an Arduino board plus some extras, like AC relays and such. I'm curious as to how the microwave oven controls its functions, like power level, cooking time, and the beeping. Any advise as to how I could get started interfacing?

Here’s the inside scoop on what’s happening. The digital display is powered by very specific DC drive voltages. Theses voltages are created by a transformer and stabilized by capacitors, all of which are located on the control board. Most of these capacitors are only rated to a working temperature of 220˚F. Well, it don’t take a brain surgeon, like yours so very frikkin’ truly, to realize that over time the heat will reduce the capacitor’s ability to capacitate thus lowering the drive voltage and dimming the display. Awwite, that’s all the theory we need to know so let’s get into the generic strategery of this repair…

The specifics will vary with the exact layout and composition of the control board you’re working on but, generally, the flow goes like this:

1. Kill power to the unit.

2. Disassemble whatever you need to to get at the control board.

3. Locate the capacitors on the control board. Typically, there are three but, again, go with what you see. They’ll look something like this:

If the touch pads on your microwave oven do not respond but the display lights up, the problem may be with the control board. The control board generates a low voltage that is supplied to the membrane switch. When a pad is depressed, the voltage signal is switched back to the control board. The control board receives these input signals from the membrane switch or touch pad and uses these commands to turn on output relays that control the various components of the microwave, such as the turntable motor and the magnetron. If the control board does not generate the low voltage signal, or if it does not sense the input signals from the membrane switch, then no output functions will occur. If you have verified that the membrane switch is fine and the connection to the control board is okay, then the control board may be defective. Replacement will require disconnecting the power and removal of the cabinet and control assembly.

Freight Cost Available
Supplier Details
Inquire Now Add this product to Inquiry Basket
Multifunction Electric Oven with Touch Control System
China Multifunction Electric Oven with Touch Control System
1
81 Units (Min. Order)
Supplier Details
Inquire Now Add this product to Inquiry Basket
Multifunction Electric Oven with Touch Control
China Multifunction Electric Oven with Touch Control
1
81 Units (Min. Order)
Supplier Details
Inquire Now Add this product to Inquiry Basket
Multifunction Electric Oven with Touch Control System
China Multifunction Electric Oven with Touch Control System
1
81 Units (Min. Order)
Supplier Details
Inquire Now Add this product to Inquiry Basket
Multifunction Electric Oven with Touch Control System
China Multifunction Electric Oven with Touch Control System
1
81 Units (Min. Order)
Supplier Details
Inquire Now Add this product to Inquiry Basket
8-tray single door single control rice steam oven with fa...
China 8-tray single door single control rice steam oven with fast heating
1
100 Sets (Min. Order)
Supplier Details
Inquire Now Add this product to Inquiry Basket
Popular Pizza Maker Ovens with Mechanical Control
China Popular Pizza Maker Ovens with Mechanical Control
1
81 Units (Min. Order)
Supplier Details
Inquire Now Add this product to Inquiry Basket
Steamer,25kW 380V Voltage,with 3 decks,Timer controllable...
China Steamer,25kW 380V Voltage,with 3 decks,Timer controllable,Induction heating technology
1
100 Sets (Min. Order)
Supplier Details
Inquire Now Add this product to Inquiry Basket
Steam Induction Cooker, Automatic Programmable Temperatur...
China Steam Induction Cooker, Automatic Programmable Temperature and Time Control
1
Supplier Details
Inquire Now Add this product to Inquiry Basket
10 cooking functions Oven, LCD display
China 10 cooking functions Oven, LCD display
2
81 Units (Min. Order)
Supplier Details
Inquire Now Add this product to Inquiry Basket
New 40ml*3pcs/box steam microwave oven cleaner
China New 40ml*3pcs/box steam microwave oven cleaner
4
US$ 0.35 - 1 / Piece
5000 Pieces (Min. Order)
Supplier Details
Inquire Now Add this product to Inquiry Basket
New 40ml*3pcs/box steam microwave oven cleaner
China New 40ml*3pcs/box steam microwave oven cleaner
4
US$ 0.35 - 1 / Piece
5000 Pieces (Min. Order)
Supplier Details
Inquire Now Add this product to Inquiry Basket
Oven control board, clock genuine, OEM
China Oven control board, clock genuine, OEM
1
US$ 5.6 - 6.7 / Piece
100 Pieces (Min. Order)
Freight Cost Available
Supplier Details
Inquire Now Add this product to Inquiry Basket
Keypad Membrane Switch for Microwave Oven, waterproof mem...
China Keypad Membrane Switch for Microwave Oven, waterproof membrane keyboard control panel switch
8
US$ 1 - 5 / Piece
100 Pieces (Min. Order)
Supplier Details
Inquire Now Add this product to Inquiry Basket
Electric oven control circuit board assembly New
China Electric oven control circuit board assembly
1
1 Piece (Min. Order)
Supplier Details
Inquire Now Add this product to Inquiry Basket
Custom Touch Control membrane switch for microwave oven
China Custom Touch Control membrane switch for microwave oven
Hot custom microwave oven control board with competitive price
US $2-20 / Piece
1000 Pieces (Min. Order)
Place of Origin: Zhejiang,China (Mainland)
Base Material: FR-4,CEM-3, ALU
Min. Hole Size: 0.1mm
Min. Line Width: 3mil
Min. Line Spacing: 3mil
Copper Thickness: 0.3-3oz
Hot custom microwave oven control board with competitive price 5 Photos
Hangzhou Lingfeng Technology Co., Ltd.
China (Mainland) Trade Assurance
Response Rate
92.9%
Add to Compare Sponsored Listing
Contact Supplier Chat Now!
Function control PCB board for washing machine/dryer/microwave oven/dish washing machine
US $1-25 / Piece
1 Piece (Min. Order)
Brand Name: MK
Model Number: MK31018A04B
Base Material: FR-4
Min. Hole Size: 4mil
Min. Line Spacing: 4mil
Board Thickness: 1.6mm
Function control PCB board for washing machine/dryer/microwave oven/dish washing machine
Shenzhen Moko Technology Ltd.
China (Mainland) Trade Assurance
Transaction Level:
122 Transactions(6 months)
1,200,000+
Response Rate
63.4%
Add to Compare Sponsored Listing
Contact Supplier Chat Now!
customized Timing device oven control board Microwave Oven Pcb PCBA Fabrication
US $5.5 / Pieces
500 Pieces (Min. Order)
Place of Origin: Guangdong,China (Mainland)
Brand Name: Jun-Chuang
Model Number: JC-OV-TI09
Min. Hole Size: 0.8mm
Board Thickness: 1.6mm
Product name: Pcb Board Assembly
customized Timing device oven control board Microwave Oven Pcb PCBA Fabrication 2 Photos
Zhongshan Junchuang Electronics Technology Co., Ltd.
China (Mainland)
Transaction Level:
Response Rate
64.3%
Add to Compare Sponsored Listing
Contact Supplier Leave Messages
ISO9001 CEM-1 HAL Halogen free microwave oven control board
US $1-10 / Piece
10 Pieces (Min. Order)
Place of Origin: Liaoning,China (Mainland)
Brand Name: OL
Base Material: fr4/94V0
Surface Finishing: HAL/ENIG/OSP/HASL/Immersion Gold
Min. Hole Size: 0.20mm
Min. Line Width: 0.1mm
ISO9001 CEM-1 HAL Halogen free microwave oven control board
O-Line Century Electronic Technology Co., Ltd. (Dalian)
China (Mainland) Trade Assurance
Transaction Level:
29 Transactions(6 months)
10,000+
Response Rate
70.6%
Add to Compare Similar Products
Contact Supplier Leave Messages
Inverter microwave oven controller/control drive board
US $10.0-100.0 / Set
1 Set (Min. Order)
Base Material: FR-4
Surface Finishing: HASL
Min. Hole Size: PTH: 0.076,NTPH: 0.05
Min. Line Width: 0.075mm(3mil)
Copper Thickness: 0.5-4.0oz
Board Thickness: 0.2mm-7mm
Inverter microwave oven controller/control drive board 6 Photos
Hangzhou Shibode Technology Co., Ltd.
China (Mainland)
Transaction Level:
Response Rate
70.0%
Add to Compare Similar Products
Contact Supplier Chat Now!
Pcba Controller Board / Microwave Oven Pcb l PCBA Fabrication
US $0.1-6 / Piece
1 Piece (Min. Order)
Place of Origin: CN
Base Material: CEM-1,CEM-3,Hight TG,FR4 Halogen Free,FR-1,FR-2,Aluminum
Surface Finishing: HALS/HALS lead free,Chemical tin,Chemical Gold,Immersion gold Inmersio
Min. Hole Size: 0.25mm
Min. Line Spacing: 0.075mm(3mil)
Copper Thickness: 0.5-5.0oz
Pcba Controller Board / Microwave Oven Pcb l PCBA Fabrication
Wells Electronic Technology Ltd.
China (Mainland) Trade Assurance
Transaction Level:
4 Transactions(6 months)
1,000+
Response Rate
60.5%
Add to Compare Similar Products
Contact Supplier Chat Now!
Microwave Oven Control PCBA board/PCB Assembly
1 Perch (Min. Order)
Place of Origin: Guangdong,China (Mainland)
Base Material: FR-4,FR2.Taconic,Rogers, CEM-1 CEM-3,ceramic,crockery,Metal,Carbon
Surface Finishing: Immersion Gold/Au,HASL,OSP,etc.
Min. Line Spacing: 0.1mm4mil)
Copper Thickness: 1/2 oz min;12 oz max
Board Thickness: 0.2mm-6.00 mm(8mil-126mil)
Microwave Oven Control PCBA board/PCB Assembly
Shenzhen Xin Da Xing Electronic Tech Co., Ltd.
China (Mainland) Trade Assurance
Transaction Level:
3 Transactions(6 months)
100+
Response Rate
89.5%
Add to Compare Similar Products
Contact Supplier Leave Messages
FR-4 high Tg Impedance Control Microwave Oven Pcb With High Quality Double sided SMT PCBA GSM Circuit Board
US $1-10 / Piece
1 Piece (Min. Order)
Place of Origin: Liaoning,China (Mainland)
Base Material: FR-4 epoxy resin,fr-4,cem-1,cem-3
Min. Line Spacing: 0.1mm(4mil)
Copper Thickness: 1/2OZ 1OZ 2OZ 3OZ
Board Thickness: 1.6mm-3.2mm,0.2mm--3.2mm
Type: Circuit Board Maker
FR-4 high Tg Impedance Control Microwave Oven Pcb With High Quality Double sided SMT PCBA GSM Circuit Board 2 Photos
BLD Electronic Co., Ltd.
China (Mainland) Trade Assurance
Transaction Level:
6 Transactions(6 months)
70,000+
Response Rate
90.7%
Add to Compare Similar Products
Contact Supplier Chat Now!
OEM electronics board pcb board for led tv microwave oven controller pcba
US $0.1-10 / Piece
1 Piece (Min. Order)
Place of Origin: Zhejiang,China (Mainland)
Model Number: led lights pcba
Min. Hole Size: 0.2mm
Min. Line Width: 0.075mm
Min. Line Spacing: 0.075mm
Board Thickness: 0.2-6.0mm
OEM electronics board pcb board for led tv microwave oven controller pcba 6 PhotosVideo
Hangzhou Frankever Electronic Co., Ltd.
China (Mainland) Trade Assurance
Transaction Level:
14 Transactions(6 months)
150,000+
Response Rate
92.0%
Add to Compare Similar Products
Contact Supplier Leave Messages
oem controller pcba Printed circuit board with SMD.DIP service
US $10-100 / Piece
100 Pieces (Min. Order)
Place of Origin: Guangdong,China (Mainland)
Model Number: pcba assembly board
Min. Hole Size: 0.15mm
Min. Line Width: 0.15mm
Min. Line Spacing: 0.15mm
Board Thickness: 1.6mm
oem controller pcba Printed circuit board with SMD.DIP service 6 Photos
Shenzhen Golden Weald Electronic Co., Limited
China (Mainland)
Transaction Level:
2 Transactions(6 months)
4,000+
Response Rate
85.0%
Add to Compare Similar Products
Contact Supplier Chat Now!
Microwave oven parts pcb board /94v-0 pcb for sale
US $0.01-5.03 / Piece
1 Piece (Min. Order)
Place of Origin: Guangdong,China (Mainland)
Base Material: FR4/ROGERS/PET/HDI/CEM/PI
Min. Hole Size: 0.15mm
Min. Line Spacing: 4mil
Copper Thickness: 0.5oz~6oz
Board Thickness: 0.5~3mm
Microwave oven parts pcb board /94v-0 pcb for sale
Shenzhen ZITROK Electronics Co., Limited
China (Mainland)
Transaction Level:
4 Transactions(6 months)
4,000+
Response Rate
73.1%
Add to Compare Similar Products
Contact Supplier Chat Now!
Customized timing device oven control circuit board, microwave oven pcb fabrication design copy
US $1-100 / Piece
100 Pieces (Min. Order)
Place of Origin: Guangdong,China (Mainland)
Model Number: LXT161019-161
Base Material: FR-4,CEM-3,FR-1,Taconic,Rogers, ALU, PL-Custom
Surface Finishing: HASL, Immersion Gold/Au, Immersion Silver, OSP, etc.
Min. Hole Size: 1mm
Board Thickness: 1.8mm
Customized timing device oven control circuit board, microwave oven pcb fabrication design copy 4 Photos
Shenzhen Leadsintec Co., Ltd.
China (Mainland)
Transaction Level:
Response Rate
50.0%
Add to Compare Similar Products
Contact Supplier Chat Now!
Oven Ignition SMT control board
Place of Origin: Jiangsu,China (Mainland)
Brand Name: JAVA
Model Number: PCB Assembly
Base Material: Teflon
Copper Thickness: 1oz
Board Thickness: 1.6mm
Oven Ignition SMT control board
Yangzhou Java Electric Co., Ltd.
China (Mainland)
Transaction Level:
Response Rate
66.7%
Add to Compare Similar Products
Contact Supplier Chat Now!
Quality OEM RPHS ems player board pcba,eletric bicycle pcba,microwave oven controller pcba odm&oem
US $0.1-10 / Piece
1 Piece (Min. Order)
Place of Origin: Guangdong,China (Mainland)
Min. Hole Size: 0.2mm
Min. Line Width: 0.2mm
Copper Thickness: 0.5-3OZ
Board Thickness: 1.6mm
Product name: microwave oven controller pcba odm&oem
Quality OEM RPHS ems player board pcba,eletric bicycle pcba,microwave oven controller pcba odm&oem 6 Photos
Shenzhen FS Technology Co., Ltd.
China (Mainland) Trade Assurance
Transaction Level:
15 Transactions(6 months)
20,000+
Response Rate
71.7%
Add to Compare Similar Products
Contact Supplier Chat Now!
High quality custome-made microwave oven pcb assembly service manufacturer
US $0.1-10 / Piece
1000 Pieces (Min. Order)
Place of Origin: Guangdong,China (Mainland)
Model Number: FRANK234-BQC
Surface Finishing: RoHS Compliant/Lead Free
Min. Hole Size: 0.075mm(3mil)
Min. Line Width: 0.075mm(3mil)
Copper Thickness: 1OZ
High quality custome-made microwave oven pcb assembly service manufacturer 5 Photos
Shenzhen Baiqiancheng Electronic Co., Ltd.
China (Mainland) Trade Assurance
Transaction Level:
1 Transaction(6 months)
200+
Response Rate
84.8%
Add to Compare Similar Products
Contact Supplier Chat Now!
micro usb pcb microwave oven control board midea air conditioner control board pcba fabrication factory
US $0.25-25 / Piece
1 Piece (Min. Order)
Place of Origin: Guangdong,China (Mainland)
Base Material: FR-4
Surface Finishing: HASL,ENIG,OSP
Copper Thickness: 0.5oz ~ 5oz
Board Thickness: 0.21mm ~ 7.0mm, 0.21mm - 7.0mm
solder mask: green/black/white/red/blue/yellow
micro usb pcb microwave oven control board midea air conditioner control board pcba fabrication factory
Shenzhen Fumax Technology Co., Ltd.
China (Mainland) Trade Assurance
Transaction Level:
10 Transactions(6 months)
First things first. Decide what your going to build it out of. If your going to use wood be sure to paint the inside to help seal it from getting moisture build up. Again, This is a safety precaution, Though it's not likely that it will get wet, I take this step just to be sure it doesn't become dangerous. At least not as bad as it could get without doing this. I don't know if you've ever touched a hot wire while in contact with wet wood or not. I have. Luckily it was just an electric fence. It hurt pretty bad but luckily it wasn't harmful. It sure felt worse than it was. That is to say that water and electricity don't mix well whereas human contact is concerned.

That said PLEASE, DO NOT use this around water or liquids of any kind. That means you don't use it for the bathroom heater GFCI (Ground Fault Circuit Interrupter) outlet or not. It's not safe to use this around sinks or bathtubs so don't do it. If you use this in a wet environment and get hurt, remember I warned you about that. So people PLEASE be careful.

We replaced the turntable motor as we thought it was shorting out the microwave. This did not fix the microwave. We then unhooked the wire harness from the microwave turntable motor thinking this would help. This did not help, the microwave would shut off on its own every time after 3 seconds. We then took the microwave apart by first unplugging it from power and removing 2 screws from the grill at the very top of the microwave. After removing the top air inlet portion, we removed one screw that holds the control panel on. We removed the control panel by lifting UPWARDS on it. It then popped out and we looked at the control board and display panel. There was no sign of a damaged capacitor on the board or any burn spots whatsoever. The wiring looked fine and everything was plugged in as it should be. The control pad was in perfect condition. We then examined and tested the door switch with a multimeter and it tested good. So we then tried a few things…

Now that the safety stuff is out of the way let's get on with it shall we? Regardless as to what your using for your materials, your going to have to make holes in it for the outlets. We can do this one of several ways. The first way which is what I did, is to use our Dremel and a cut-off wheel. It makes pretty quick work of metal or the type of board that I used for the front panel. They also work pretty well on plastics. The only concern there is that the plastic tends to melt with the friction which can send chunks flying towards your eyes and face. This would be a really good time to don those safety glasses. Trips to the hospital should be social visits, not necessary emergencies.

Repairing your microwave might seem like a difficult task, but more than 80% of our customers rate these repairs as “easy” or “really easy.” On average these repairs should take less than 15 minutes to complete. We break microwave repair down by common symptoms, like your touchpad is not responding, your microwave is noisy, your tray will not turn, or your door is stuck. This step-by-step guide teaches you how to troubleshoot. You will learn what parts are at fault, and how to test, fix, or replace them.

Add to Compare Similar Products
Contact Supplier Chat Now!
Low Cost China Microwave Oven Control Board Assembly Manufacturer
US $0.1-0.2 / Piece
1 Piece (Min. Order)
Place of Origin: Guangdong,China (Mainland)
Brand Name: NOEYA
Model Number: NYY-01-PCB-001
Copper Thickness: 1oz
Board Thickness: 1.6mm
Application: Electronics Device
Low Cost China Microwave Oven Control Board Assembly Manufacturer 6 Photos
Shenzhen Noeya Technology Co., Ltd.
China (Mainland)
Transaction Level:
2 Transactions(6 months)
6,000+
Response Rate
84.1%
Add to Compare Similar Products
Contact Supplier Leave Messages
100% Test Electronic Circuit baord for Microwave Oven
US $1-25 / Piece
1 Piece (Min. Order)
Brand Name: HUA XING
Model Number: HX-009
Base Material: FR-4
Surface Finishing: HASL
Min. Line Spacing: 0.075mm =3mil
Copper Thickness: 1oz
100% Test Electronic Circuit baord for Microwave Oven 3 Photos
Shenzhen Huaxing PCBA Limited
China (Mainland) Trade Assurance
Transaction Level:
15 Transactions(6 months)
90,000+
Response Rate
87.3%
Add to Compare Similar Products
Contact Supplier Chat Now!
Hot sale best quality 2 layer aluminum-based microwave oven blue enig 94v0 rohs pcb pcba
US $0.01-10 / Piece
1 Piece (Min. Order)
Brand Name: OEM
Surface Finishing: HASL lead free
Min. Hole Size: 0.1mm (4mil)
Min. Line Spacing: 0.075mm (3mil)
Copper Thickness: 1OZ
Board Thickness: 1.6mm
Hot sale best quality 2 layer aluminum-based microwave oven blue enig 94v0 rohs pcb pcba 6 Photos
Shenzhen Shinelink Technology Ltd.
China (Mainland)
Transaction Level:
2 Transactions(6 months)
oem electronic pcba pcb design service pcb board assembler manufacturing
US $0.1-10 / Piece
1 Piece (Min. Order)
Place of Origin: CN
Base Material: FR4
Min. Line Width: 0.2mm
Min. Line Spacing: 0.2mm
Copper Thickness: 0.5-3OZ
Board Thickness: 1.6mm
oem electronic pcba pcb design service pcb board assembler manufacturing 6 Photos
Shenzhen FS Technology Co., Ltd.
China (Mainland) Trade Assurance
Transaction Level:
15 Transactions(6 months)
20,000+
Response Rate
71.7%
Add to Compare Similar Products
Contact Supplier Chat Now!
Electronics pcb pcba circuit board assemblies service manufacturing
US $0.1-10 / Piece
5 Pieces (Min. Order)
Brand Name: OEM
Base Material: FR-4/aluminum/ceramic/cem-3/FR-1
Surface Finishing: HASL Lead Free
Min. Hole Size: 0.075mm(3mil)
Min. Line Spacing: 0.1mm/4mil
Board Thickness: 0.2mm--3.2mm
Electronics pcb pcba circuit board assemblies service manufacturing 6 Photos
Shenzhen Fulltronics Technology Co., Ltd.
China (Mainland) Trade Assurance
Transaction Level:
2 Transactions(6 months)
1,000+
Response Rate
94.9%
Add to Compare Similar Products
Contact Supplier Leave Messages
2 Layer Electronic Boar Rigid/Flex-Rigid PCB Manufacturing, PCB Assembly
US $1.0-10.0 / Piece
1 Piece (Min. Order)
Brand Name: Cirket
Model Number: Customized
Surface Finishing: HASL/ENIG/OSP/Immersion Silver
Min. Hole Size: 0.20mm
Min. Line Spacing: 0.075 mm
Copper Thickness: 0.5oz-4oz
2 Layer Electronic Boar Rigid/Flex-Rigid PCB Manufacturing, PCB Assembly
Shenzhen Cirket Electronics Co., Ltd.
China (Mainland)
Transaction Level:
Add to Compare Similar Products
Contact Supplier Leave Messages
94V-0 circuit board/OEM electronic manufacturer
US $1-25 / Piece
1 Piece (Min. Order)
Brand Name: HUA XING
Base Material: FR-4
Surface Finishing: HASL Lead Free
Min. Hole Size: 0.10mm
Product name: PCB Board Assembly
Type: Electronic Board
94V-0 circuit board/OEM electronic manufacturer 4 Photos
Shenzhen Huaxing PCBA Limited
China (Mainland) Trade Assurance
Transaction Level:
3 Transactions(6 months)
10,000+
Response Rate
87.5%
Add to Compare Similar Products
Contact Supplier Chat Now!
Professional BGA PCB circuit board pcb pcba assembly service supplier and manufacturer in Shenzhen
US $0.01-5 / Piece
1 Piece (Min. Order)
Brand Name: BQC
Surface Finishing: HASL Lead Free
Min. Hole Size: 0.004"
Min. Line Spacing: 0.003"
Copper Thickness: 1oz
Board Thickness: 1.6mm
Professional BGA PCB circuit board pcb pcba assembly service supplier and manufacturer in Shenzhen 6 Photos
Shenzhen Baiqiancheng Electronic Co., Ltd.
China (Mainland) Trade Assurance
Transaction Level:
1 Transaction(6 months)
200+
Response Rate
84.8%
Add to Compare Similar Products
Contact Supplier Chat Now!
Smart Electronics Newest bluetooth module board cloning ,manufacture ,one stop Electronic manufacturing service
US $0.01-0.1 / Piece
1 Piece (Min. Order)
Place of Origin: Guangdong,China (Mainland)
Base Material: FR-4, FR-1, CEM-1, CEM-3, FR-4 Halogen Free
Surface Finishing: HASL, Lead free HASL, OSP, Gold-plating, Chemical silver,
Min. Line Spacing: 4/4mil(0.1/0.1mm)
Copper Thickness: 0.5oz, 1.0oz, 2oz, 3oz,
Board Thickness: 0.4mm-3.2mm
Smart Electronics Newest bluetooth module board cloning ,manufacture ,one stop Electronic manufacturing service 6 Photos
Shenzhen S-Mart Electronics Co., Ltd.
China (Mainland) Trade Assurance
Transaction Level:
23 Transactions(6 months)
20,000+
Response Rate
91.2%
Add to Compare Similar Products
Contact Supplier Leave Messages
ROHS Electronic Printed Circuit Board Manufacturing/Double Sided PCBA Design Assembly Copy Board
US $1-15 / Piece
50 Pieces (Min. Order)
Place of Origin: Guangdong,China (Mainland)
Brand Name: ONLITEX
Base Material: FR4
Surface Finishing: Tin plated
Product name: PCBA Circuit Design
Application: Consumer Electronics
ROHS Electronic Printed Circuit Board Manufacturing/Double Sided PCBA Design Assembly Copy Board 2 PhotosVideo
Dongguan Onlitex Electronic Co., Ltd.
China (Mainland) Trade Assurance
Transaction Level:
23 Transactions(6 months)
The control panel "kicking out" of a cook cycle prematurely, then possibly "locking up." The oven may have to be unplugged then plugged back in before the panel will accept programming. Possible causes: poor or improper grounding; or, excessive amounts of stray RF leakage, either from the latch side of the door, or from the magnetron within the component compartment. If removing the outer case alleviates the symptom, suspect leakage from the RF gasket or the internal structure of the magnetron.

SYMPTOM:

The control panel counts down too quickly or too slowly. Inaccurate timing may also be the result of an oven (of the type that can be converted from 50 to 60 cycles and vice-versa) being set for the wrong voltage or frequency for the area in which it is being used.

What ever material you use make sure you don't over work your Dremel. You want to put just enough pressure to keep it cutting but not enough that you might break the disk. If you do break one chock it up to a learning experience and be glad it scratched the safety glasses instead of your eye. You could also use a router for this. Another good set of tools would be a drill and a jigsaw. If you use standard household outlets you could even use a hole saw. Whatever your method be sure to mark and cut very carefully. Remember, you can always take more material off. If you cut to much it's gonna look sloppy. That's not to mention that things won't fit quite right. This is why I suggested standard outlets. They can be mounted in wall boxes which makes them a lot safer than most other types of power outlet.

As a matter of fact you could use the inlet from an old computer power supply to give your project power. It would make it more portable because the cord could then come off. I have no idea why it would need to be that portable as I've never had to take mine anywhere or had a reason to. It's just a thought I had one day while I was moving into a new house and tripping on the cord. See? Safety. Not the best idea if you plan to use it to limit the on-time of a heater or large halogen sun lamp (good timer for a home made tanning station.) Just be careful not to overload the cord or relays. Why yes, this is the reason for the master kill switch. Thank you for asking.

SYMPTOM:

Check/Repair: Push the Clear/OFF pad. Shut off power to the oven, disconnect the flat ribbon connector from the electronic oven control board and then restore electrical power. If the code reappears after about 30 seconds, replace the electronic oven control board. If the code doesn’t reappear, replace the key panel.

The control panel will not start, or fails to count down when started; or, the panel counts down but neglects to activate the cook relay, triac, stirrer or blower motor, or other panel-controlled component. This may also be the result of a misadjusted or defective interlock switch, faulty wiring or related connections, or an open thermal protector or fuse.

NOTE: The triac or triac module (part of many control units) may be checked in several ways, all of which are outlined in Sections 13-12 through 13.16.
SYMPTOM:

Add to Compare Similar Products
Contact Supplier Chat Now!
OEM PCB board manufacturing and PCB Assembly service supplier
US $1.8-2.0 / Piece
1 Piece (Min. Order)
Place of Origin: Guangdong,China (Mainland)
Brand Name: OEM/MOKO
Model Number: MK-PCB030308
Min. Line Spacing: 0.1mm/4mil)
Copper Thickness: 1/2OZ 1OZ 2OZ 3OZ
Application: Consumer Electronics
OEM PCB board manufacturing and PCB Assembly service supplier 6 Photos
Shenzhen Moko Technology Ltd.
China (Mainland) Trade Assurance
Transaction Level:
122 Transactions(6 months)
1,200,000+
Response Rate
63.4%
Add to Compare Similar Products
Contact Supplier Chat Now!
Aluminum led bulb pcb, led circuit board, shenzhen pcb professional manufactur
US $0.1 / Piece
1 Piece (Min. Order)
Brand Name: OEM ODM
Model Number: UC
Base Material: FR-4
Surface Finishing: HASL
Min. Line Width: 0.075mm/0.075mm(3mil/3mil)
Min. Line Spacing: 0.1mm4mil)
Aluminum led bulb pcb, led circuit board, shenzhen pcb professional manufactur 6 Photos
Shenzhen UC Industrial Limited
China (Mainland) Trade Assurance
Transaction Level:
8 Transactions(6 months)
7,000+
Response Rate
65.6%
Add to Compare Similar Products
Contact Supplier Chat Now!
printed circuit board/pcba/pcb assembly/controller design and manufacturing
US $0.3-1.6 / Piece
1 Piece (Min. Order)
Model Number: pcb assembly
Surface Finishing: HASL/ ENIG /OSP,ENIG HASL OSP
Min. Line Width: 0.1mm(4mil)
Min. Line Spacing: 0.1mm(4mil)
Board Thickness: 1.6mm-3.2mm,0.2mm--3.2mm
Type: PCB and PCBA
printed circuit board/pcba/pcb assembly/controller design and manufacturing
BLD Electronic Co., Ltd.
China (Mainland) Trade Assurance
Transaction Level:
6 Transactions(6 months)
70,000+
Response Rate
90.7%
Add to Compare Similar Products
Contact Supplier Chat Now!
Low Cost Circuit Card PCB Manufacturing And Assembly House In China
US $0.5-2.5 / Piece
1 Piece (Min. Order)
Place of Origin: Guangdong,China (Mainland)
Brand Name: OEM/ODM
Base Material: FR-4
Min. Line Width: 3 Mil (0.075 Mm)
Min. Line Spacing: 3 Mil (0.075 Mm)
Copper Thickness: 1/2OZ 1OZ 2OZ 3OZ
Low Cost Circuit Card PCB Manufacturing And Assembly House In China 6 Photos
Shenzhen Sinofast Electron Limited
China (Mainland) Trade Assurance
Transaction Level:
22 Transactions(6 months)
80,000+
Response Rate
84.6%
Add to Compare Similar Products
Contact Supplier Leave Messages
Shenzhen Factory mp3 pcba assembly pcba prototyping pcb&pcba manufacturing
US $0.3-1.0 / Pieces
20 Pieces (Min. Order)
Place of Origin: Guangdong,China (Mainland)
Model Number: pcb&pcba manufacturing
Surface Finishing: OSP HASL Immersion Gold
Min. Line Width: 0.12mm
Min. Line Spacing: 0.12mm
Copper Thickness: 1oz-2oz
Shenzhen Factory mp3 pcba assembly pcba prototyping pcb&pcba manufacturing 6 Photos
Shenzhen Golden Weald Electronic Co., Limited
China (Mainland)
Transaction Level:
2 Transactions(6 months)
4,000+
Response Rate
85.0%
Add to Compare Similar Products
Contact Supplier Chat Now!
FR4 copper clad laminate sheet/CCL for PCB board / Manufactured by own factory/94v0 pcb board
US $0.1-10 / Piece
1 Piece (Min. Order)
Place of Origin: Guangdong,China (Mainland)
Model Number: PCBA-510
Base Material: FR4/ROGERS/PET/HDI/CEM/PI
Surface Finishing: HASL/Lead Free HASL/OSP/Gold Plating/Immersion Gold/ENIG
Min. Hole Size: 0.25mm
Board Thickness: 1.6mm
FR4 copper clad laminate sheet/CCL for PCB board / Manufactured by own factory/94v0 pcb board 6 Photos
Wells Electronic Technology Ltd.
China (Mainland) Trade Assurance
Transaction Level:
4 Transactions(6 months)
1,000+
Response Rate
60.5%
Add to Compare Similar Products
Contact Supplier Leave Messages
Smart board PCB manufacturer, support PCB assembly manufacturing
US $0.23-0.45 / Piece
1 Piece (Min. Order)
Brand Name: FL
Model Number: FL0125
Surface Finishing: ENIG
Min. Hole Size: 0.10mm
Min. Line Spacing: 0.1mm
Board Thickness: 1.6mm
Smart board PCB manufacturer, support PCB assembly manufacturing 6 Photos
Shenzhen Fastline Electronic Material Co., Limited
China (Mainland) Trade Assurance
Transaction Level:
3 Transactions(6 months)
500+
Response Rate
95.8%
Add to Compare Similar Products
Contact Supplier Leave Messages
China 4 Layer Industrial Control PCBA Electronic Contract Manufacturing
US $1-10 / Piece
1 Piece (Min. Order)
Model Number: PCB-3226
Base Material: FR4
Min. Hole Size: 0.2mm
Min. Line Width: 0.1mm
Min. Line Spacing: 0.1mm
Copper Thickness: 1oz
China 4 Layer Industrial Control PCBA Electronic Contract Manufacturing 6 Photos
Shenzhen POE Precision Technology Co., Ltd.
China (Mainland) Trade Assurance
Transaction Level:
4 Transactions(6 months)
7,000+
Response Rate
88.1%
Add to Compare Similar Products
Contact Supplier Chat Now!
high-quality multilayer PCB assembly and PCB manufacturing
US $0.03-5.03 / Piece
1 Piece (Min. Order)
Place of Origin: Guangdong,China (Mainland)
Brand Name: ZITROK
Base Material: FR4/ROGERS/PET/HDI/CEM
Min. Line Width: 4mil
Min. Line Spacing: 4mil
Board Thickness: 0.8~3.2mm
high-quality multilayer PCB assembly and PCB manufacturing 3 Photos
Shenzhen ZITROK Electronics Co., Limited
China (Mainland)
Transaction Level:
4 Transactions(6 months)
4,000+
Response Rate
73.1%
Add to Compare Similar Products
Contact Supplier Chat Now!
Customized e cigarette pcb circuit board with professional manufacturer
US $1-50 / Unit
1000 Units (Min. Order)
Place of Origin: Guangdong,China (Mainland)
Min. Hole Size: Mounting Hole: 4mm
Min. Line Spacing: 0.003"
Copper Thickness: 0.5oz-6oz,0.5oz-5oz
Board Thickness: 0.2mm--3.2mm
Type: Electonic Circuit Board PCB Assembly
Customized e cigarette pcb circuit board with professional manufacturer 6 Photos
Shenzhen Aircloud Technology Limited
China (Mainland) Trade Assurance
Transaction Level:
Add to Compare Similar Products
Contact Supplier Chat Now!
Professional PCB Assembly, PCBA OEM/ODM PCBA Manufacturing
US $0.1 / Piece
1 Piece (Min. Order)
Place of Origin: Guangdong,China (Mainland)
Model Number: PCBA-101
Min. Hole Size: 0.20mm
Min. Line Spacing: 4/4mil(0.1/0.1mm)
Copper Thickness: 35um
Board Thickness: 1.6mm
Professional PCB Assembly, PCBA OEM/ODM PCBA Manufacturing 6 Photos
Shenzhen Xinjiaye Electronics Technology Co., Ltd.
China (Mainland)
Transaction Level:
Response Rate
65.7%
Add to Compare Similar Products
Contact Supplier Chat Now!
printed circuit board/pcba/pcb assembly/controller design and manufacturing
US $0.5-10 / Piece
1 Piece (Min. Order)
Brand Name: RayPCB
Model Number: PCBA
Base Material: FR-4,CEM-1,CEM-3,Hight TG,FR4 Halogen Free,FR-1,FR-2,Aluminum
Surface Finishing: HASL,HAL-LF,OSP ENIG etc
Min. Line Width: 0.1mm
Board Thickness: 0.4mm-8.5mm
printed circuit board/pcba/pcb assembly/controller design and manufacturing 3 Photos
Shenzhen Rayming Electronic Co., Ltd.
China (Mainland)
Transaction Level:
Response Rate
55.6%
Add to Compare Similar Products
Contact Supplier Leave Messages
Chinese custom made PCB manufacturing and 94v-0 electronics Assembly PCBA from Zhongshan
US $8.25 / Pieces
100 Pieces (Min. Order)
Place of Origin: Guangdong,China (Mainland)
Base Material: FR-4
Min. Line Width: 0.10-0.254 mm
Board Thickness: 0.4-2.4 mm
Product name: Custom made PCB manufacturing and 94v-0 electronics Assembly PCBA
Application: Mobile,Tablet,PC
Chinese custom made PCB manufacturing and 94v-0 electronics Assembly PCBA from Zhongshan 4 Photos
Zhongshan Hytepro Technologies Limited
China (Mainland) Trade Assurance
Transaction Level:
7 Transactions(6 months)
She said she could bump my question up to a service manager, and I gladly accepted that option.

Our ten-day gamecation seemed to fly by. When it was over, we had assembled, painted, based, and fielded two 12-player Blood Bowl teams, built several terrain pieces, and painted up a bunch of Frostgrave treasure tokens and scatter terrain. Last year’s experience was some of the most fun I’d had in recent memory. This year topped that. It was a great way of forcing myself to take a break from work, get a lot of hobby time in, and it was a really wonderful bonding experience with my son. I’m already looking forward to next year.

If you have a hobby or maker activity that you love, but never feel like you give yourself over to it, if you have the means to do so, DO IT! The past two years have been such great gifts. I encourage you to think about trying a makecation yourself one year. And if it’s something you can do with your kids or your partner or a group of friends, all the better.

he magnetron tube consists of a filament heater, a metal anode, two magnets, and an antenna. The filament, which functions as the cathode, is enclosed in a ring-shaped metal anode. Then the cathode and the anode are sandwiched between two magnets. These components make up the assembly that will generate the microwaves. A metal strap holds the complete assembly together. Metal cooling fins, which are welded to the anode cylinder, help get rid of the heat produced by the magnetron. A thermal protector is mounted directly on the magnetron to prevent damage to the tube from overheating.

5 An antenna enclosed in a glass tube is connected to the anode cylinder. Then, the air within the magnetron tube is pumped out to create a vacuum. The antenna is connected to the waveguide, the hollow metal enclosure through which microwaves are transported from the magnetron tube to the cooking cavity. A blower motor is attached to the magnetron, and then a plastic fan is attached to the blower motor to provide cool air to the magnetron to prevent overheating.

I wish I could give credit to the person who suggested my fix, but I don’t recall where I read it. I looked at many sites on this issue with this pesky microwave oven!

Add to Compare Similar Products
Contact Supplier Leave Messages
Electronic Customized dimming led driver board manufacturing
US $0.1-10 / Piece
1 Piece (Min. Order)
Brand Name: Frantronix
Base Material: fr4
Surface Finishing: hasl
Min. Hole Size: 0.2mm
Min. Line Spacing: 0.075mm
Board Thickness: 0.2-6.0mm
Electronic Customized dimming led driver board manufacturing 6 Photos
Hangzhou Frankever Electronic Co., Ltd.
China (Mainland) Trade Assurance
Transaction Level:
14 Transactions(6 months)
150,000+
Response Rate
92.0%
Add to Compare Similar Products
Contact Supplier Chat Now!
Electronic PCB Assembly Factory for radio pcb circuit board manufacturing
US $0.1-50 / Piece
1 Piece (Min. Order)
Place of Origin: Guangdong,China (Mainland)
Brand Name: fumax
Model Number: 006
Surface Finishing: Immersion Gold, HASL
Min. Hole Size: 0.1mm
Min. Line Spacing: 3mil
Electronic PCB Assembly Factory for radio pcb circuit board manufacturing 6 Photos
Shenzhen Fumax Technology Co., Ltd.
China (Mainland) Trade Assurance
Transaction Level:
10 Transactions(6 months)
710,000+
Response Rate
65.6%
Add to Compare Similar Products
Contact Supplier Chat Now!
professional manufacturer of car alarm system Alarm system PCB Assembly
US $1.0 / Piece
1 Piece (Min. Order)
Place of Origin: Guangdong,China (Mainland)
Brand Name: HUA XING
Model Number: HX-009
Min. Hole Size: 0.25mm
Min. Line Width: 0.1mm/4mi
Copper Thickness: 1/2OZ 1OZ 2OZ 3OZ
professional manufacturer of car alarm system Alarm system PCB Assembly 6 Photos
Shenzhen Huaxing PCBA Limited
China (Mainland) Trade Assurance
Transaction Level:
15 Transactions(6 months)
90,000+
Response Rate
87.3%
Add to Compare Similar Products
Contact Supplier Chat Now!
Copper clad laminate pcb board assembly ,multilayer board manufactur
US $0.5-10 / Piece
1 Piece (Min. Order)
Place of Origin: Guangdong,China (Mainland)
Surface Finishing: OSP/HASL/Lead free HASL/ENIG/Immersion silver/Electronic Gold
Min. Hole Size: 0.10mm
Min. Line Width: 0.10mm
Copper Thickness: 1 Oz
Product name: pcb board assembly
Copper clad laminate pcb board assembly ,multilayer board manufactur 6 Photos
Shenzhen Jinghon Electronics Limited
China (Mainland) Trade Assurance
Transaction Level:
15 Transactions(6 months)
30,000+
Response Rate
89.5%
Add to Compare Similar Products
Contact Supplier Chat Now!
Solar water heater controller/control board/pcba/pcb assembly design and manufacturing
US $5.0-50.0 / Set
1 Set (Min. Order)
Model Number: SPT0801
Surface Finishing: HASL
Min. Line Width: 0.075mm(3mil)
Min. Line Spacing: 0.75mm
Board Thickness: 0.2mm-7mm
Product name: Access control board
Solar water heater controller/control board/pcba/pcb assembly design and manufacturing 6 Photos
Hangzhou Shibode Technology Co., Ltd.
China (Mainland)
Transaction Level:
Response Rate
70.0%
Add to Compare Similar Products
Contact Supplier Chat Now!
electronic pcb design,pcb design and manufacture, high voltage pcb design
US $0.1-1 / Piece
1 Piece (Min. Order)
Place of Origin: Guangdong,China (Mainland)
Model Number: dlo-L2OSP0091
Surface Finishing: HALS/HALS lead free
Min. Hole Size: 0.25mm
Min. Line Spacing: 0.075mm(3mil)
Copper Thickness: 0.5-4.0oz
electronic pcb design,pcb design and manufacture, high voltage pcb design 4 Photos
Shenzhen Daliou Electronic Co., Ltd.
China (Mainland)
Transaction Level:
Response Rate
53.8%
Add to Compare Similar Products
Contact Supplier Leave Messages
Pcb Assembly Service,Low Cost Turnkey Oem Pcb Assembly Service Manufacturing
US $0.8-1.5 / Piece
1 Piece (Min. Order)
Brand Name: JY
Model Number: JY PCB
Min. Line Width: 0.08mm
Min. Line Spacing: 0.08mm
Copper Thickness: 1~4oz
Board Thickness: 0.5~3.2mm
Pcb Assembly Service,Low Cost Turnkey Oem Pcb Assembly Service Manufacturing 4 Photos
Dalian JY Electronic Technology Co., Ltd.
China (Mainland) Trade Assurance
Transaction Level:
42 Transactions(6 months)
500,000+
Response Rate
100.0%
Add to Compare Similar Products
Contact Supplier Chat Now!
led pcb assembly board bom list quote and evaluate Manufacturer
US $0.001-0.03 / Piece
1 Piece (Min. Order)
Place of Origin: Liaoning,China (Mainland)
Brand Name: BLD
Model Number: PCBA
Min. Hole Size: 0.2mm(8mil)
Min. Line Spacing: 0.1mm(4mil)
Copper Thickness: 1/2OZ 1OZ 2OZ 3OZ
led pcb assembly board bom list quote and evaluate Manufacturer 2 Photos
BLD Electronic Co., Ltd.
China (Mainland) Trade Assurance
Transaction Level:
63 Transactions(6 months)
420,000+
Response Rate
98.8%
Add to Compare Similar Products
Contact Supplier Chat Now!
ShenZhen electrostatic precipitator pcb and pcba in manufacturer
US $0.1-29.99 / Piece
1 Piece (Min. Order)
Place of Origin: Guangdong,China (Mainland)
Brand Name: EASTWIN
Surface Finishing: HASL ENIG
Min. Hole Size: 0.25mm
Min. Line Width: 0.075(3mil)
Board Thickness: 0.4mm-3.2mm
ShenZhen electrostatic precipitator pcb and pcba in manufacturer 6 Photos
Shenzhen Eastwin Trading Ltd.
China (Mainland) Trade Assurance
Transaction Level:
86 Transactions(6 months)
580,000+
Response Rate
74.6%
Add to Compare Similar Products
Contact Supplier Leave Messages
PCB Manufacturing - Small PCB SMD components assembly
US $1-100 / Piece
1 Piece (Min. Order)
Place of Origin: Guangdong,China (Mainland)
Model Number: HX-08-PCBA-402
Base Material: rogers/FR4/taconic/ALU/ceramic/arlon
Copper Thickness: 0.5oz-6oz
Board Thickness: 0.2mm-4.5mm
Product name: PCB Manufacturing - Small PCB SMD components assembly
PCB Manufacturing - Small PCB SMD components assembly 6 Photos
Shenzhen Huaxing PCBA Limited
China (Mainland) Trade Assurance
Transaction Level:
4 Transactions(6 months)
6,000+
Response Rate
94.6%
Add to Compare Similar Products
Contact Supplier Leave Messages
RoHS,UL,ISO pcb board+Assembly=NICE PCBA,good price high quality trusted manufacturer
US $0.1-0.2 / Piece
1 Piece (Min. Order)
Brand Name: Leadsintec
Base Material: FR-4/aluminum/ceramic/cem-3/FR-1
Surface Finishing: HASL
Min. Hole Size: 0.20mm
Min. Line Width: 3mil
Board Thickness: 1.6mm
RoHS,UL,ISO pcb board+Assembly=NICE PCBA,good price high quality trusted manufacturer 6 Photos
Shenzhen Senyan Circuit Co., Ltd.
China (Mainland) Trade Assurance
Transaction Level:
3 Transactions(6 months)
5,000+
Response Rate
63.0%
Add to Compare Similar Products
Contact Supplier Chat Now!
China One stop Electronic manufacturing, PCB Assembly service, mold design and Injection Mold since 2004
US $0.1-10 / Piece
1 Piece (Min. Order)
Place of Origin: Guangdong,China (Mainland)
Brand Name: OEM
Model Number: LX-5023
Base Material: PI or custom, FR-4,CEM-3,Taconic,Rogers,ALU,FR-1
Surface Finishing: HASL, Immersion Gold/Au, HASL, OSP, Immersion silver, etc
Copper Thickness: 3oz
China One stop Electronic manufacturing, PCB Assembly service, mold design and Injection Mold since 2004 4 Photos
Shenzhen Leadsintec Co., Ltd.
China (Mainland)
Transaction Level:
Response Rate
50.0%
Add to Compare Similar Products
Contact Supplier Chat Now!
Custom 94v-0 universal pcb manufacturing,pcb assembly factory
US $0.1-5 / Piece
1 Piece (Min. Order)
Place of Origin: Liaoning,China (Mainland)
Model Number: OEM/ODM
Min. Line Width: 0.15mm
Min. Line Spacing: 0.15mm
Copper Thickness: 1oz~3oz
Product name: Custom 94v-0 universal pcb manufacturing,pcb assembly factory
Custom 94v-0 universal pcb manufacturing,pcb assembly factory 6 Photos
Dalian Jinseo Electronic Technology Co., Ltd.
China (Mainland) Trade Assurance
Transaction Level:
36 Transactions(6 months)
30,000+
Response Rate
81.2%
Add to Compare Similar Products
Contact Supplier Chat Now!
Shenzhen Quality Adult Flash Game Electronic Led Strip 2 Layer Flexible Pcb Mount Smt Assembly Service For Led Manufacturer
US $0.1-0.2 / Piece
1 Piece (Min. Order)
Place of Origin: Guangdong,China (Mainland)
Brand Name: NOEYA
Model Number: NYY-01-PCBA-001
Base Material: Teflon
Surface Finishing: OSP,Protective coating for pcba
Copper Thickness: 1oz
Shenzhen Quality Adult Flash Game Electronic Led Strip 2 Layer Flexible Pcb Mount Smt Assembly Service For Led Manufacturer 6 Photos
Shenzhen Noeya Technology Co., Ltd.
China (Mainland)
Transaction Level:
2 Transactions(6 months)
6,000+
Response Rate
84.1%
Add to Compare Similar Products
Contact Supplier Leave Messages
One Stop PCB Manufacturing, Electronic Board for Assembling with SMT Technology
US $0.08-9.8 / Piece
1 Piece (Min. Order)
Place of Origin: Guangdong,China (Mainland)
Brand Name: FS
Base Material: FR-4,Hi-TG FR4,CEM-1,CEM-3, TACONIC, Metal/ceramic/aluminum base
Min. Line Width: 1/2 oz. copper .003" +/- .0005" (0.0762mm)
Min. Line Spacing: 1/2 oz. copper .003" +/- .0005" (0.0762mm)
Board Thickness: 0.4-3.0mm
One Stop PCB Manufacturing, Electronic Board for Assembling with SMT Technology 5 Photos
Shenzhen FS Technology Co., Ltd.
China (Mainland) Trade Assurance
Transaction Level:
2 Transactions(6 months)
1,000+
Response Rate
85.7%
Add to Compare Similar Products
Contact Supplier Chat Now!
High Quality Audio DAC Device PCBA Manufacturing and Testing Turnkey PCB Assembly Service
US $1-250 / Piece
1 Piece (Min. Order)
Brand Name: C-Alley
Model Number: PCBA
Surface Finishing: ENIG,HASL
Min. Hole Size: 0.15mm
Min. Line Width: 4mil
Board Thickness: 1.6mm
High Quality Audio DAC Device PCBA Manufacturing and Testing Turnkey PCB Assembly Service
Shenzhen Kingsheng Pcba Tech. Co., Ltd.
China (Mainland)
Transaction Level:
Response Rate
63.0%
Add to Compare Similar Products
Contact Supplier Leave Messages
Chinese manufacturer 8 Layer PCB Manufacturing
US $0.05-1.25 / Piece
1 Piece (Min. Order)
Brand Name: Wonderful pcb
Surface Finishing: Enig
Min. Line Width: 0.1mm
Copper Thickness: 1oz
Board Thickness: 1.6mm
Application: electronic products/medical industry/etc.
Chinese manufacturer 8 Layer PCB Manufacturing 6 Photos
Shenzhen Wonderful Technology Co., Ltd.
China (Mainland) Trade Assurance
Transaction Level:
4 Transactions(6 months)
10,000+
Response Rate
86.2%
Add to Compare Similar Products
Contact Supplier Leave Messages
One stop oem electric pcba board ,medical pcba manufacturing
US $0.1-1.0 / Piece
1 Piece (Min. Order)
Place of Origin: Guangdong,China (Mainland)
Base Material: FR-4
Surface Finishing: HASL
Min. Line Spacing: 0.003"
Copper Thickness: 1oz
Type: Electronic Board
One stop oem electric pcba board ,medical pcba manufacturing 4 Photos
Shenzhen Ali Brother And Sister Technology Co., Ltd.
China (Mainland)
Add to Compare
Contact Supplier Leave Messages
Promotion seasonal battery charger usb pcb dual manufacturing 5 years warranty
US $0.1-10 / Piece
1 Piece (Min. Order)
Place of Origin: Guangdong,China (Mainland)
Base Material: FR-4/aluminum/ceramic/cem-3/FR-1
Surface Finishing: HASL Lead Free/OSP/Soft Gold/Hard Gold
Min. Line Width: 0.1mm
Copper Thickness: 0.25 Oz -12 Oz
Board Thickness: 0.005"-0.250"
Promotion seasonal battery charger usb pcb dual manufacturing 5 years warranty 6 Photos
Gesp Technology (Dalian) Co., Ltd.
China (Mainland) Trade Assurance
Transaction Level:
3 Transactions(6 months)
900+
Response Rate
90.2%
Add to Compare Similar Products
Contact Supplier Chat Now!
PCBA electronics hardware manufacturing include PCB,PCBA and final product assembly
US $1.0 / Piece
1 Piece (Min. Order)
Brand Name: HUA XING
Model Number: MX1011
Base Material: FR-4
Surface Finishing: HASL Lead Free
Min. Hole Size: 0.25mm
Type: Electronic Board
PCBA electronics hardware manufacturing include PCB,PCBA and final product assembly 6 Photos
Shenzhen Huaxing PCBA Limited
China (Mainland) Trade Assurance
Response Rate
100.0%
Add to Compare Similar Products
Contact Supplier Leave Messages
Electronic Development pcb board manufacturing
US $0.5-9.9 / Piece
1 Piece (Min. Order)
Place of Origin: Guangdong,China (Mainland)
Model Number: R-2713
Min. Line Width: 3 Mil (0.075 Mm)
Min. Line Spacing: 0.075---0.09MM
Board Thickness: 1.6mm
Product name: pcb board manufacturing
Electronic Development pcb board manufacturing
Shenzhen Ridecon Technology Co., Ltd.
China (Mainland)
Transaction Level:
12 Transactions(6 months)
380,000+
Response Rate
0.0%
Add to Compare Similar Products
Contact Supplier Leave Messages
Electronic Water Heater PCBA manufacturing
US $5-100 / Piece
1 Piece (Min. Order)
Model Number: PCBA
Base Material: FR4
Surface Finishing: HASL/ Immersion Gold
Min. Hole Size: 3mil (0.075mm)
Min. Line Spacing: 3 Mil (0.075 Mm)
Copper Thickness: 1/2OZ 1OZ 2OZ 3OZ
Electronic Water Heater PCBA manufacturing 6 Photos
Shenzhen Kingle Technology Co., Ltd.
China (Mainland) Trade Assurance
Transaction Level:
6 Transactions(6 months)
10,000+
Response Rate
68.2%
Add to Compare Similar Products
Contact Supplier Chat Now!
Air Condition OEM Double Sided PCBA/PCB Assembly,One Stop EMS PCBA supplier/manufacturer in China
US $0.5-28.1 / Piece
1 Piece (Min. Order)
Place of Origin: Guangdong,China (Mainland)
Model Number: PQ1347
Min. Hole Size: 0.15mm
Min. Line Spacing: 3mil
Copper Thickness: 1oz , 2oz, 3oz,4oz,5oz,6oz
Board Thickness: 0.2mm,0.6mm, 1.0mm, 1.2mm, 1.6mm 2.0mm ,2.4mm,3.0mm, max 10mm
Air Condition OEM Double Sided PCBA/PCB Assembly,One Stop EMS PCBA supplier/manufacturer in China 2 Photos
Hebei Chenfei Electronic Tech Co., Ltd.
China (Mainland) Trade Assurance
Transaction Level:
4 Transactions(6 months)
3,000+
Response Rate
64.0%
Add to Compare Similar Products
Contact Supplier Leave Messages
car lamp pcb board manufacturing
US $0.2-0.6 / Piece
1 Piece (Min. Order)
Place of Origin: Guangdong,China (Mainland)
Brand Name: Xingda
Base Material: FR-4,FR-2.taconic,rogers, CEM-1 CEM-3,ceramic,crockery,metal-backed
Surface Finishing: OSP, HASL, ENIG, ENEPIC,Immersion silver, immersion tin etc
Copper Thickness: min-1/2oz;max-12oz
Board Thickness: 0.2mm-6.00 mm(8mil-126mil)
car lamp pcb board manufacturing
Shenzhen Xin Da Xing Electronic Tech Co., Ltd.
China (Mainland) Trade Assurance
Transaction Level:
3 Transactions(6 months)
100+
Response Rate
89.5%
Add to Compare Similar Products
Contact Supplier Leave Messages
PCB & PCB Assembly Manufacturing, PCBA & Components SMT/Soldering Service
US $0.1-29.99 / Piece
1 Piece (Min. Order)
Brand Name: Sitech
Model Number: Customized
Min. Line Width: 0.075mm/0.1mm(3mil/4mil)
Min. Line Spacing: 0.003"
Product name: electronic circuit board
Type: assembly manufacturer
PCB & PCB Assembly Manufacturing, PCBA & Components SMT/Soldering Service 6 Photos
Shenzhen Sato Intelligent Technology Ltd.
China (Mainland) Trade Assurance
Transaction Level:
15 Transactions(6 months)
100,000+
Response Rate
81.6%
Add to Compare Similar Products
Contact Supplier Chat Now!
electronic components pcba assembly LED pcba manufacturing
US $0.5-15 / Piece
1 Piece (Min. Order)
Brand Name: POE
Base Material: FR-4
Surface Finishing: HASL
Min. Line Spacing: 4mil
Copper Thickness: 1 Oz
Board Thickness: 1.6mm
electronic components pcba assembly LED pcba manufacturing 2 Photos
Shenzhen POE Precision Technology Co., Ltd.
China (Mainland) Trade Assurance
Transaction Level:
Response Rate
80.6%
Add to Compare
Contact Supplier Chat Now!
Electronic PCBA manufacturing, pcba with Yamaha smt line,pcba assembly
US $2.12-3 / Piece
3 Pieces (Min. Order)
Brand Name: Singo
Model Number: PCBA
Min. Line Width: 5mil
Min. Line Spacing: 5mil
Copper Thickness: 1 OZ
Board Thickness: 1.6mm
Electronic PCBA manufacturing, pcba with Yamaha smt line,pcba assembly 4 Photos
Hangzhou Singo Tech Co., Ltd.
China (Mainland)
Transaction Level:
11 Transactions(6 months)
If the touch pads on your microwave oven do not respond but the display lights up, the problem is most likely with the membrane switch. This component, which is more commonly referred to as the touch pad, is actually a series of soft touch electrical switches. It is usually made up of two layers of a thin Mylar plastic with a conductive material on the inner surfaces. A formed gap between the two surfaces will separate the conductive coatings until pressure is applied by the user, making the two surfaces come in contact. When the two conductive surfaces contact each other, an electrical circuit is completed to provide an input signal to the control board. With repeated use, the conductive coating will eventually wear out and be unable to make a good enough contact to send the signal to the control board. To access the membrane switch you will need to unplug the unit and remove the cabinet. The membrane switch is often attached to the control panel and is usually connected to the electronic control board with a flat ribbon style connector. Check the connection first and if it appears okay, then you can test the membrane switch for continuity with a multi-meter. There should only be a few ohms of resistance for each touch pad when pressed. To perform this test you will require the matrix layout of the membrane switch which should be contained in the electrical schematic.

Contrary to a popular myth, a microwave oven does not cook from the inside out. If the food is small, the microwaves penetrate it, cooking it all at once. If the food is large, the outside gets cooked by microwaves, while the inside is cooked by the heat transferred from the hot exterior portion of the food.

At PCBR, we repair your individual appliance control. PCBR will rebuild controls for ranges, stoves, microwave ovens, laundry, dishwashers, and refrigerators. Your control is upgraded using our history of past problems for that particular board, and we fix any potential problems before they occur. Our plant is authorized to rebuild for many manufacturers, including Whirlpool, Maytag, BSH, Kenmore, and others.

I am obsessed with a most ridiculous hobby. Many hobbies are known for being a time suck and a wallet drain, but few are more of these than tabletop hobby wargaming. I have been playing all manner of boardgame, roleplaying game, and wargame most of my life. My real passion is for tabletop fantasy and sci-fi miniature wargames. This is a very multi-disciplinary hobby in which you plan your armies, assemble and paint your miniatures, build the gaming tables you play on, construct the buildings and terrain that go on the table, plan games and campaigns, and then, after all of that, you can spend hours, weeks, even years playing through a game or series of linked game campaigns.

PCBR is a contractor company. Warranties are offered to contractors only. Why? For your safety! Appliances are typically 220 volts; some have capacitors that carry a big electrical charge of energy even when disconnected. If you are on this web site and not a contractor, we urge you to use a qualified technician to remove and reinstall appliance controls. In addition, it is sometimes very difficult to determine if the controller is the particular failed component. Other devices like a sensor temperature probe, or touch panel, power supply, or wire connection could show the same symptoms as a faulty controller, and they may be part of the problem.

• Manufacturers caution users not to put metal utensils or aluminum foil inside the microwave oven. These objects, like the metal walls of the oven, will reflect microwaves. When the powerful microwaves act on the walls and the metal objects, the air between them becomes charged with electricity, thereby causing sparks. These sparks can damage the cooking cavity.

In 2000 two Massachusetts inventors received a patent for a microwave oven that can be installed in a car's glove compartment. The oven would be powered by the car's battery and the controls would be mounted on the dashboard. The oven comes with a bin that could store things when the oven is not being used. The oven would only work when the bin is not in place.

A categorized collection of used touch panels (or keypads) is a good idea for testing purposes. Unless they are totally inoperative, do not throw away used touch panels. They take up little room and can be used very effectively. For example, suppose you replace a touch panel because the "2" and "4" pads do not work. Label the defective panel appropriately, and save it. One day, a similar oven comes along, with a different symptom: the "start" pad will not respond. Temporarily replace the latter touch panel (with the unresponsive "start" pad) with the used touch panel having the functional "start" pad, and test the unit. If, with the substitute test touch panel installed, the oven still will not "start", the problem is likely not in the original touch panel. On the other hand, if the test panel "start" pad works, replace the original touch panel. A categorized collection of the touch panels—commercial and domestic—will take much of the gamble out of control panel-touch panel dilemma.

Add to Compare Similar Products
Contact Supplier Chat Now!
board manufacturing,SMT Electronic Equipment pcb Assembly
US $0.5-2 / Piece
1 Piece (Min. Order)
Place of Origin: Guangdong,China (Mainland)
Base Material: FR-4 Epoxy Resin
Min. Hole Size: 0.20mm
Min. Line Width: 0.075mm/3mil
Min. Line Spacing: 0.075mm/3mil
Copper Thickness: 1/1OZ
board manufacturing,SMT Electronic Equipment pcb Assembly
Shenzhen Rayming Electronic Co., Ltd.
China (Mainland)
Response Rate
54.2%
Add to Compare
Contact Supplier Leave Messages
Electronic pcba PCB assembly board manufacturer
Add to Compare Similar Products
Contact Supplier Chat Now!
ODM OEM service Microwave oven controller PCBA
US $0.1-1.0 / Piece
1 Piece (Min. Order)
Place of Origin: Guangdong,China (Mainland)
Brand Name: ABAS
Surface Finishing: HASL
Min. Line Spacing: 0.003"
Copper Thickness: 1oz
Application: Electronics Device
ODM OEM service Microwave oven controller PCBA 2 Photos
Shenzhen Ali Brother And Sister Technology Co., Ltd.
China (Mainland)
Add to Compare Similar Products
Contact Supplier Leave Messages
Impedance Control Microwave Oven Pcba With Cheap Price
US $0.1-10 / Piece
1 Piece (Min. Order)
Place of Origin: Guangdong,China (Mainland)
Brand Name: ShuYi
Base Material: FR4, TG, CEM-1, Aluminium
Min. Hole Size: 0.25mm
Copper Thickness: 0.5-2.0 oz
Board Thickness: 0.2-3.0mm
Impedance Control Microwave Oven Pcba With Cheap Price 6 Photos
Shenzhen Shuyi Electronics Co., Ltd.
China (Mainland) Trade Assurance
Transaction Level:
Response Rate
60.0%
Add to Compare Similar Products
Contact Supplier Chat Now!
Electronic boards metal pcb / motor control pcb / microwave oven pcb
US $0.5-10 / Piece
1 Piece (Min. Order)
Place of Origin: Guangdong,China (Mainland)
Min. Hole Size: 0.10mm
Copper Thickness: 1oz
Board Thickness: 1.6mm
Type: Electronic boards metal pcb / motor control pcb / microwave oven pcb
Application: Consumer Electronics
Electronic boards metal pcb / motor control pcb / microwave oven pcb 6 Photos
Dampsonic Electronic (Shenzhen) Co., Ltd.
China (Mainland) Trade Assurance
Response Rate
60.0%
Add to Compare Similar Products
Contact Supplier Leave Messages
PC Waterproof Embossed Flexible Membrane Switch 3M adhesiver For Microwave Oven
US $0.2-12 / Piece
50 Pieces (Min. Order)
Place of Origin: Guangdong,China (Mainland)
Brand Name: RayPCB
Min. Hole Size: 0.075mm
Min. Line Width: 0.1mm
Min. Line Spacing: 0.1mm
Board Thickness: 0.21 - 7.0mm
PC Waterproof Embossed Flexible Membrane Switch 3M adhesiver For Microwave Oven 2 Photos
Shenzhen Rayming Electronic Co., Ltd.
China (Mainland)
Transaction Level:
Response Rate
55.6%
Add to Compare Similar Products
Contact Supplier Chat Now!
2016 New food grade microwave oven circuit board Batteries
US $0.1-2 / Piece
100 Pieces (Min. Order)
Brand Name: Jun-Chuang
Base Material: CEM-1
Min. Line Spacing: 0.35mm
Copper Thickness: 2oz
Board Thickness: 1.6mm
Product name: Pcb Board Assembly
2016 New food grade microwave oven circuit board Batteries 2 Photos
Zhongshan Junchuang Electronics Technology Co., Ltd.
China (Mainland)
Transaction Level:
Response Rate
64.3%
Add to Compare Similar Products
Contact Supplier Leave Messages
Custom FR-4 94v0 microwave oven pcb circuit board assembly
US $0.08-9.8 / Piece
1 Piece (Min. Order)
Brand Name: FS
Base Material: FR-4,Hi-TG FR4,CEM-1,CEM-3, TACONIC, Metal/ceramic/aluminum base
Min. Hole Size: 0.1mm (4mil)
Min. Line Width: 1/2 oz. copper .003" +/- .0005" (0.0762mm)
Min. Line Spacing: 1/2 oz. copper .003" +/- .0005" (0.0762mm)
Copper Thickness: 1/3oz ~6oz
Custom FR-4 94v0 microwave oven pcb circuit board assembly 4 Photos
Shenzhen FS Technology Co., Ltd.
China (Mainland) Trade Assurance
Transaction Level:
2 Transactions(6 months)
1,000+
Response Rate
85.7%
Add to Compare Similar Products
Contact Supplier Leave Messages
microwave oven controller PCBA with ODM&OEM service
US $0-10 / Piece
0 Pieces (Min. Order)
Place of Origin: Guangdong,China (Mainland)
Model Number: PCBA-592
Base Material: FR4/ROGERS/PET/HDI/CEM/PI
Min. Hole Size: 0.25mm
Min. Line Spacing: 0.1mm
Board Thickness: 1.6mm
microwave oven controller PCBA with ODM&OEM service 6 Photos
Wells Electronic Technology Ltd.
China (Mainland) Trade Assurance
Transaction Level:
4 Transactions(6 months)
1,000+
Response Rate
60.5%
Add to Compare Similar Products
Contact Supplier Leave Messages
customized Timing device oven control board Microwave Oven Pcb PCBA Fabrication
US $0.1-70 / Piece
20 Pieces (Min. Order)
Base Material: PI or custom, FR-4,CEM-3,Taconic,Rogers,ALU,FR-1
Surface Finishing: HASL, Immersion Gold/Au, HASL, OSP, Immersion silver, etc
Min. Hole Size: 1mm
Min. Line Width: 0.1mm
Min. Line Spacing: 0.1mm
Board Thickness: 1.8mm
customized Timing device oven control board Microwave Oven Pcb PCBA Fabrication 5 Photos
Shenzhen Leadsintec Co., Ltd.
China (Mainland)
Transaction Level:
Response Rate
50.0%
Add to Compare Similar Products
Contact Supplier Chat Now!
Shenzhen FR-4 high Tg circuit board Microwave Oven PCB With High Quality
US $0.03-5.03 / Piece
1 Piece (Min. Order)
Base Material: FR4/ROGERS/PET/HDI/CEM
Board Thickness: 0.8~3.2mm
Copper Thickness: 0.5oz~3oz
Surface Finishing: ENIG, Lead free HASL , gold plating, immersion tin and gold finger
Certificate: UL,ROHS,SGS,ISO9001
Solder Mask: Green, black, blue, red
Shenzhen FR-4 high Tg circuit board Microwave Oven PCB With High Quality 5 Photos
Shenzhen ZITROK Electronics Co., Limited
China (Mainland)
Transaction Level:
4 Transactions(6 months)
4,000+
Response Rate
73.1%
Add to Compare Similar Products
Contact Supplier Chat Now!
High Quality 2 layers copper circuit pcb smt assembly for microwave oven pcb
US $0.5-10 / Piece
1 Piece (Min. Order)
Place of Origin: Guangdong,China (Mainland)
Brand Name: NOEYA
Surface Finishing: HASL Lead Free
Min. Line Width: 0.1 0mm
Min. Line Spacing: 0.10mm
Copper Thickness: 0.5oz-4oz
High Quality 2 layers copper circuit pcb smt assembly for microwave oven pcb 6 Photos
Shenzhen Noeya Technology Co., Ltd.
China (Mainland)
Transaction Level:
2 Transactions(6 months)
6,000+
Response Rate
84.1%
Add to Compare Similar Products
Contact Supplier Leave Messages
Security pcb board oem assemblies microwave oven pcba
US $0.2-10.4 / Piece
10 Pieces (Min. Order)
Brand Name: Golden Weald
Model Number: pcb assembly/pcba/pcb and components supplier
Base Material: FR4
Surface Finishing: OSP/HASL/Immersion Gold
Min. Line Width: 0.15mm
Copper Thickness: 1-12oz
Security pcb board oem assemblies microwave oven pcba 6 Photos
Shenzhen Golden Weald Electronic Co., Limited
China (Mainland)
Transaction Level:
2 Transactions(6 months)
4,000+
Response Rate
85.0%
Add to Compare Similar Products
Contact Supplier Chat Now!
Shenzhen FR-4 high Tg Impedance Control Microwave Oven Pcb With High Quality
US $0.1-6 / Piece
1 Piece (Min. Order)
Model Number: pcba0930
Base Material: CEM-1,CEM-3,Hight TG,FR4 Halogen Free,FR-1,FR-2,Aluminum
Surface Finishing: HALS/HALS lead free,Chemical tin,Chemical Gold,Immersion gold Inmersio
Min. Hole Size: 0.25mm
Copper Thickness: 0.5-5.0oz
Board Thickness: 0.2mm-7mm
Shenzhen FR-4 high Tg Impedance Control Microwave Oven Pcb With High Quality
Wells Electronic Technology Ltd.
China (Mainland) Trade Assurance
Transaction Level:
4 Transactions(6 months)
1,000+
Response Rate
60.5%
Add to Compare Similar Products
Contact Supplier Chat Now!
control pcba circuit board pcb for metal detector/washing machine/dryer/microwave oven/elevator
US $0.2-11 / Piece
100 Pieces (Min. Order)
Place of Origin: Guangdong,China (Mainland)
Brand Name: Leadsintec
Surface Finishing: HASL, Immersion Gold/Au, Immersion Silver, OSP, etc.
Min. Line Width: 0.01mm
Copper Thickness: 3oz
Board Thickness: 1.8mm
control pcba circuit board pcb for metal detector/washing machine/dryer/microwave oven/elevator 2 Photos
Shenzhen Leadsintec Co., Ltd.
China (Mainland)
Transaction Level:
Response Rate
50.0%
Add to Compare Similar Products
Contact Supplier Chat Now!
Different Models of microwave oven control circuit board pcb manufactured in China
US $1-5.5 / Piece
1000 Pieces (Min. Order)
Place of Origin: Guangdong,China (Mainland)
Brand Name: Jun-Chuang
Base Material: CEM-1
Min. Line Spacing: 0.35mm
Copper Thickness: 2oz
Board Thickness: 1.6mm
Different Models of microwave oven control circuit board pcb manufactured in China 6 Photos
Zhongshan Junchuang Electronics Technology Co., Ltd.
China (Mainland)
Transaction Level:
Response Rate
64.3%
Add to Compare Similar Products
Contact Supplier Leave Messages
original media Inverter microwave oven control board
US $5-10 / Piece
100 Pieces (Min. Order)
Function: Grilling,micro and grill
Installation: Built-In
Voltage (V): 220
Certification: CE,UL
Model Number: 20MX63-L
Place of Origin: Guangdong,China (Mainland)
original media Inverter microwave oven control board
Shenzhen Feawell Technology Co., Ltd.
China (Mainland)
Transaction Level:
Add to Compare Similar Products
Contact Supplier Chat Now!
Electronic universal microwave oven pcb control board
US $0.5-10 / Piece
1 Piece (Min. Order)
Min. Line Spacing: 0.003"
Min. Hole Size: 0.004"
Number of Layers: 6-Layer
Place of Origin: Liaoning,China (Mainland)
Model Number: Customized
Board Thickness: 0.005"-0.250"
Electronic universal microwave oven pcb control board
Dalian Jinseo Electronic Technology Co., Ltd.
China (Mainland) Trade Assurance
Transaction Level:
36 Transactions(6 months)
30,000+
Response Rate
81.2%
Add to Compare Similar Products
Contact Supplier Chat Now!
small factory at home microwave oven control board
Supplier Details
Inquire Now Add this product to Inquiry Basket
Professional PCBA OEM/ODM manufacturer for voice recorder...
China Professional PCBA OEM/ODM manufacturer for voice recorder microwave oven, home appliances PCBA
8
US$ 1 / Piece
1 Piece (Min. Order)
Freight Cost Available
Supplier Details
Inquire Now Add this product to Inquiry Basket
Microwave Oven, Printed Circuit Board Assembly, OEM&ODM
China Microwave Oven, Printed Circuit Board Assembly, OEM&ODM
6
US$ 1 / Piece
1 Piece (Min. Order)
Supplier Details
Inquire Now Add this product to Inquiry Basket
Diameter 16mm Brand New Rotary Encoder
China Diameter 16mm Brand New Rotary Encoder
1
US$ 0.01 - 1 / Piece
2000 Pieces (Min. Order)
Supplier Details
Inquire Now Add this product to Inquiry Basket
Diameter 16mm Brand New Rotary Encoder
China Diameter 16mm Brand New Rotary Encoder

Display Board

If the display has gone out the display board might be defective. If the display goes out completely the problem can be either the display board or the main control board. If the display goes out partially the problem is usually the display board.

JES1384SF is a partial model number for a GE Microwave. To see specific parts for your Microwave, please add the last few figures.

Any thoughts, things to check further would appreciated.

Door switches all checked good, Thermal switches checked good.

Certificate: ISO9001-2008 and RoHS.
200,000 hours long life testing.
LED display, numeric display.
LED lamps.

Express PCB		Rigid PCB Rapid Prototype,24 hours
Fr4 PCB		prototype Lower to 15USD !
Rapid Prototype		Fr4 Rigid PCB Rapid Prototype China,

Turnkey Services		Turnkey PCB Assembly Services,
Turnkey services		Print circuit board Manufacturing, Turnkey Services
Turnkey Assembly		Through Hole PCB components wave soldering Assembly

microwave oven control board PCB assembly electronic manufacturing

PCB Supplier Shenzhen, China, PCB Manufacturer, Turnkey services

Express PCB

Rigid PCB Rapid Prototype,24 hours

Turnkey Services

Turnkey PCB Assembly Services,

microwave oven control board PCBA turnkey assembly Manufacturing